• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.48-56
• /
• 2001

In this paper, this study aims at the evaluation on the characteristics of CFRP laminate plates using a falling weight impact tester. The experiment was conducted on several laminates of different orientation. A system was built far measur- ing the impact strength of CFRP laminates in consideration of stress wave propagation theory using a falling weight impact tester. Delamination areas of impacted specimens for the different ply orientation were measured with ultrasonic C- scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having flour interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy oft hybrid specimen containing a GFRP layer was higher than that of normal specimens.

• 산업공학
• /
• 제3권1호
• /
• pp.13-20
• /
• 1990

The application of human-factor concept in developing a complex weapon system is important for system engineer to determine the system performance and reliability. This paper describes the evaluation procedure of human factors in the X-system wherein the evaluation result provides a better performance than the previous model in operatability and maintainability. The criteria used for the evaluation of a design adequacy of the X-system are based on the military human-factor standards.

• 산업공학
• /
• 제15권1호
• /
• pp.1-9
• /
• 2002

Tandem AGV system is obtained by partitioning all workstations into multiple zones assigning a single vehicle to each zone. In this paper, we propose an analytical model to design a tandem AGV system with multi-load AGVs. Using simulation, the performance of the proposed model is shown by comparing a conventional multi-load AGV system.

• 산업공학
• /
• 제4권1호
• /
• pp.83-91
• /
• 1991

This study proposes a half-simulation-half-real system that is used as an FMS building tool. In this hybrid system. softwares related to the operation of the FMS and the computer network on which the softwares run are real, while the physical movements of the devices in the system are simulated. The study shows the structure of the proposed system as well as the building procedure for the system. Adventages and usages of the system are also stated in detail.

• 산업공학
• /
• 제6권1호
• /
• pp.47-54
• /
• 1993

Sequential Numbering System(SNS) is one of the production and inventory management system, which is more effective and practical to minor enterprises than Material Requirement Planning (MRP) system or Just-in-Time(JIT) system. The purpose of the paper is the structured analysis of SNS as the first phase of software development. Data Flow Diagram(DFD), Data Dictionary(DD), and Mini-Specs are used to analyze the system through the second level. The result can be exploited to SNS software design and programming.

• Architectural research
• /
• 제14권1호
• /
• pp.27-33
• /
• 2012

This study proposes analytical methods to establish the eigenfunction of continuous system due to substructuring and decoupling of discrete subsystems. The dynamic characteristics of updated continuous system are evaluated by the constraint effect of consistent deformation at the interfaces between two systems. Beginning with the dynamic equation for constrained discrete system, this work estimates the modal eigenmode function for the continuous system due to the addition or deletion of discrete systems. Numerical applications illustrate the validity and applicability of the proposed method.

• 산업공학
• /
• 제10권3호
• /
• pp.109-116
• /
• 1997

Document management system is a tool, based on the document life cycle concept, for structured management of various documents within an organization. In this paper, we address a development process of document management system based on SGML. We have developed a document management system which can support a variety of types in documents such as informal data, HTML, CGI and so on. Using the developed system, users can access documents in the system through an internet browser, and also add or modify existing documents.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.555-557
• /
• 1992

Recently, realization of an intelligent cooperative interaction system between a man and robot systems is required. In this paper, HyperCard with a voice control is used for above system because of its easy handling and excellent human interfaces. Clicking buttons in the HyperCard by a mouse device or a voice command means controlling each joint of a robot system. Robot teaching operation of grasping a bin and pouring liquid in it into a cup is carried out. This robot teaching method using HyperCard provides a foundation for realizing a user friendly cooperative interaction system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.573-574
• /
• 1992

We developed a recognition and tracking system of moving objects. The system consists of one CCD video camera, two DC motors in horizontal and vertical axles with encoders, pluse width modulation(PWM) driving unit, 16 bit NEC 9801 microcomputer, and their interfaces. The recognition and tracking system is able to recognize shape and size of a moving object and is able to track the object within a certain range of errors. This paper presents the brief introduction of the recognition and tracking system developed in our laboratory.

• 산업공학
• /
• 제11권1호
• /
• pp.199-205
• /
• 1998

This paper describes the development of on-the-machine measuring(OMM) system which can directly measure the two and three dimensional machined accuracy using a scanning probe in milling machine. Two algorithms, NC program based continuous path(CP) measurement and CAD data assisted point to point(PTP) measurement, are developed for three dimensional measurements, with consideration of the characteristics of the scanning probe. The algorithms are used to develop an auto measuring system. The delveloped system is compared with the CMM (Coordinate Measuring Machine) in terms of accuracy and repeatability. The OMM system is expected to realize measurement time reduction and hence result in high productivity.