• ETRI Journal
• /
• 제40권2호
• /
• pp.188-196
• /
• 2018

This paper presents a pulse radar system to detect drones based on a target fluctuation model, specifically the Swerling target model. Because drones are small atypical objects and are mainly composed of non-conducting materials, their radar cross-section value is low and fluctuating. Therefore, determining the target fluctuation model and applying a proper integration method are important. The proposed system is herein experimentally verified and the results are discussed. A prototype design of the pulse radar system is based on radar equations. It adopts three different pulse modes and a coherent pulse integration to ensure a high signal-to-noise ratio. Outdoor measurements are performed with a prototype radar system to detect Doppler frequencies from both the drone frame and blades. The results indicate that the drone frame and blades are detected within an instrumental maximum range. Additionally, the results show that the drone's frame and blades are close to the Swerling 3 and 4 target models, respectively. By the analysis of the Swerling target models, proper integration methods for detecting drones are verified and can thus contribute to increasing in detectability.

• 한국항행학회논문지
• /
• 제23권5호
• /
• pp.345-351
• /
• 2019

항공용 SIL은 항공전자시스템의 통합 및 검증에 사용되는 통합시험환경이다. 최근에는 항공전자시스템의 요구도 검증을 시스템 통합 측면에서부터 충분히 고려하기 위하여 항공용 SIL 분야의 개발 참여를 비행체 요구분석 단계부터로 앞당기고 있으며, 비행체의 체계종합 일정에 영향을 주지 않도록 항공용 SIL의 개발 비용 및 기간을 최소화하기 위한 노력을 꾸준히 진행하고 있는 추세이다. 본 논문에서는 항전체계 검증에 사용되는 항공용 SIL의 모델링 방법 표준화를 통한 개발기간/비용 단축 및 유지보수성 증대를 위하여 항공용 SIL에 적용 가능한 모델링 형식론 기반의 항공용 시뮬레이션 모델 프레임워크(ASMF)를 제안한다.

• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.825-832
• /
• 2016

본 논문에서는 항공전자시스템 통합시험에 사용하기 위한 데이터 버스 분석 장비 개발에 대해 기술하였다. 본 데이터 버스 분석 장비는 다양한 인터페이스를 수용할 수 있도록 대부분의 항공전자시스템에 채택되고 있는 MIL-STD-1553B, CAN(Controller Area Network), Ethernet 인터페이스 카드를 갖추었다. 버스 데이터의 수집과 분석을 동시에 효율적으로 수행하기 위해 수집 엔진과 분석 엔진은 각각의 하드웨어를 가진다. 데이터 분석 효율성을 높이기 위해 Grid, 2D 및 3D 형태의 데이터 전시 기능을 제공한다. 데이터 버스 분석 장비의 검증은 시험 절차서에 입각하여 모듈 단위 테스트 및 모듈 간 통합 테스트를 수행하였다. 실제 시험 환경인 비행체 SIL(System Integration Laboratory) 환경에서 수행된 통합시험 결과를 통해 연동 요구도 검증 및 개발된 장비의 유용성을 확인하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.184-188
• /
• 2009

To interactively share High Definition (HD)-quality visualization over emerging ultra-high-speed network infrastructure, several lossless and low-delay real-time media (i.e., uncompressed HD video and audio) transport systems are being designed and prototyped. However, most of them still rely on expensive hardware components. As an effort to reduce the building cost of system, in this paper, we propose the integration of both transmitter and receiver machines into a single bi-directional transport system. After detailed bottleneck analysis and subsequent refinements of embedded software components, the proposed integration can provide Real-time Transport Protocol (RTP)-based bi-directional transport of uncompressed HD video and audio from a single machine. We also explain how to interface the Gbps-bandwidth display output of uncompressed HD media system to the networked tiled display of 10240 $\times$ 3200 super-high-resolution. Finally, to verify the feasibility of proposed integration, several prototype systems are built and evaluated by operating them in several different experiment scenarios.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.117-122
• /
• 2007

The novel implant system was developed using osseo-integration technology which enable amputee to overcome skin troubles in use of previous socket system and was evaluated in view of biomechanics, radiology, histology, and pathology. The osseo-integrated implants were designed and manufactured using CT image of canine's tibia and were applied to laboratory animals (canines). The follow-up studies were performed for 24 months with 10 canines. In radiology examination, we found that the relative low strain distribution caused medial and posterior bone resorption and then we verified them by biomechanical testing. In histological approach, the complete osseo-integration was observed through the activity of osteoblast cells around bone-implant interface and the radial outer region of bone due to peristeum reaction. Lastly in pathological aspect, the evidence of superficial infection was detected but that of deep infection was not. Therefore it is thought that infection problem will be overcome by immunity of body and good hygiene.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.482-484
• /
• 2005

• 대한임상검사과학회지
• /
• 제50권3호
• /
• pp.289-296
• /
• 2018

임상병리학과 학제 단일화에 대한 의견을 교수와 병원근무자들을 대상으로 설문조사 형식으로 조사하여 분석하였다. 2018년 1월 18일부터 25일까지 웹 버전의 설문지가 255명의 대학교수들과 4,000명의 병원근무자들에게 배포되었다. 회수율은 교수들은 79명(30.9%), 병원실무자들은 1,368명(34.2%)이 응답하였다. 임상병리학의 학제 이원화에 대한 인식조사에서는 교수와 병원근무자 모두 4년제로 학제 통합이 필요하다고 조사되었다. 4년제 통합 전제조건은 임상병리 인증평가원 설립과 교육과정의 표준화가 높게 조사되었고, 4년제 통합의 필요조건은 학생정원조정과 교육과정의 표준화가 높게 조사되었다. 4년제 통합방식은 인증평가를 통과한 대학만이 4년제를 운영해야 한다는 의견이 교수와 병원근무자 모두 가장 높게 조사되었다. 4년제 통합시 대학정원 적정인원은 40명 미만이 가장 높게 조사되었다. 결론적으로 교수들과 병원실무자들은 의료환경의 급격한 변화에 부응하는 전문성을 가진 임상병리사를 배출하기 위해서는 임상병리학과 학제의 4년제 통합이 필수적이고, 이를 위해 임상병리인증평가원 설립, 교육과정의 표준화, 학생정원조정 이 전제되어야 한다고 생각하고 있음을 보여준다.

• Journal of information and communication convergence engineering
• /
• 제20권1호
• /
• pp.16-21
• /
• 2022

In this research, we create a network infrastructure based on a service-oriented infrastructure (SOI) for the virtualization technology and integrate it with a cloud technology that applies the cloud integration management platform (CIMP) concept. In CIMP, the server and storage will be separated. The server will be adopted for virtualization while the storage will be used by students and teachers to store data. As long they save their data in the storage module, every time, everywhere, and on every device, they can access their data. This research will implement the design of the network infrastructure and be applied to the remote practical learning system in the laboratory. Students and teachers will ultimately adopt this network infrastructure for remote practice using their respective devices without physically meeting in the laboratory. In the future, if the implementation phase is successful, then in addition to laboratory environments, it can be implemented in all learning activities at our campus.

• International Journal of Control, Automation, and Systems
• /
• 제1권4호
• /
• pp.444-452
• /
• 2003

An integration system with multi-measurement sets can be realized via combined application of a centralized and federated Kalman filter. It is difficult for the centralized Kalman filter to remove a failed sensor in comparison with the federated Kalman filter. All varieties of Kalman filters monitor innovation sequence (residual) for detection and isolation of a failed sensor. The innovation sequence, which is selected as an indicator of real time estimation error plays an important role in adaptive mechanism design. In this study, the centralized Kalman filter with adaptive measurement fusion is introduced by means of innovation sequence. The objectives of adaptive measurement fusion are automatic isolation and recovery of some sensor failures as well as inherent monitoring capability. The proposed adaptive filter is applied to the GPS/SDINS integration system with an additional sensor. Simulation studies attest that the proposed adaptive scheme is effective for isolation and recovery of immediate sensor failures.

• ETRI Journal
• /
• 제41권3호
• /
• pp.396-407
• /
• 2019

Laser-assisted bonding (LAB) is an advanced technology in which a homogenized laser beam is selectively applied to a chip. Previous researches have demonstrated the feasibility of using a single-tier LAB process for 3D through-silicon via (TSV) integration with nonconductive paste (NCP), where each TSV die is bonded one at a time. A collective LAB process, where several TSV dies can be stacked simultaneously, is developed to improve the productivity while maintaining the reliability of the solder joints. A single-tier LAB process for 3D TSV integration with NCP is introduced for two different values of laser power, namely 100 W and 150 W. For the 100 W case, a maximum of three dies can be collectively stacked, whereas for the 150 W case, a total of six tiers can be simultaneously bonded. For the 100 W case, the intermetallic compound microstructure is a typical Cu-Sn phase system, whereas for the 150 W case, it is asymmetrical owing to a thermogradient across the solder joint. The collective LAB process can be realized through proper design of the bonding parameters such as laser power, time, and number of stacked dies.