• 한국항해항만학회지
• /
• 제38권3호
• /
• pp.203-209
• /
• 2014

As a sense of practical field, most researchers emphasize the importance of safety management to prevent marine accidents. The purpose of this paper is to develope a new safety evaluation method using Safety Index (SI) which is to measure the emotional feeling of navigation officer by traffic situations. In this study, the questionnaires with SI are used to investigate the degree of sensing levels of navigation officers according to the navigation situations. In addition, the traffic data obtained from AIS (Automatic Identification System) data are used to give actual situations in the questionnaire investigation. As results of questionaries investigations based upon the AIS data, it is shown that the Safety Index can be used as a criterion to determine the safety levels of ship navigating in a coastal areas.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.147-152
• /
• 2007

Numerous non-destructive tests(NDT) to assess the safety of real structures have been developed. System identification(SI) techniques using dynamic responses and behaviors of structural systems become an outstanding issue of researchers. However the conventional SI techniques are identified to be non-practical to the complex and tall buildings, due to limitation of the availability of an accurate data that is magnitude or location of external loads. In most SI approaches, the information on input loading and output responses must be known. In many cases, measuring the input information may take most of the resources, and it is very difficult to accurately measure the input information during actual vibrations of practical importance, e.g., earthquakes, winds, micro seismic tremors, and mechanical vibration. However, the desirability and application potential of SI to real structures could be highly improved if an algorithm is available that can estimate structural parameters based on the response data alone without the input information. Thus a technique to estimate structural properties of building without input measurement data and using limited response is essential in structural health monitoring. In this study, shaking table tests on three-story plane frame steel structures were performed. Out-put only model analysis on the measured data was performed, and the dynamic properties were inverse analyzed using least square method in time domain. In results damage detection was performed in each member level, which was performed at story level in conventional SI techniques of frequency domain.

• 대한토목학회논문집
• /
• 제30권2A호
• /
• pp.161-168
• /
• 2010

국내 가동 중 일부 원전의 원자로건물에 부착식 텐던이 설치되어 있고, 부착식 텐던에 대한 유효 긴장력 평가는 이들 원전의 계속운전을 위한 주요 현안으로 부각되고 있다. 따라서, 본 연구에서는 System Identification 기법을 이용한 부착식 텐던의 유효 긴장력 평가를 위하여, SI 기법에 유효한 주요 매개변수의 영향 평가를 수행하고 최적의 매개변수를 도출하였다. 본 연구를 위하여, 원자로건물 벽체의 1/5 축소모형 시험체를 제작하였고, 유효 긴장력과 고유진동수 및 변위와의 상관성을 분석하기 위하여 Impact test, SIMO sine sweep test 및 광섬유센서와 변위계에 의한 휨시험을 수행하였다. 시험결과, 고유진동수와 변위 모두 유효 긴장력과 좋은 상관성을 지니는 것으로 나타나, 이들 매개변수 모두 SI 기법의 입력자료로 활용되어 부착식 텐던의 유효 긴장력 예측이 가능한 것으로 분석되었다.

• 한국지진공학회논문집
• /
• 제10권6호
• /
• pp.29-36
• /
• 2006

이 논문에서는 진동형상의 민감도로 유도한 피셔정보행렬(Fisher Information Matrix)를 이용하는 가속도계의 최적위치 결정 기법 MS-EIDV(modal sensitivity-effective independence distribution vector)을 제안하고, 이를 사용하여 구조물의 동적 거동을 잘 반영하여 가속도계의 최적위치를 결정할 수 있는 합리적인 기준을 제시한다. 실험을 위한 가속도계의 최적위치는 구조물의 변수가 기지값이어야 결정되지만 구조물의 변수값은 실험결과를 사용한 SI(system identification)기법과 같은 역해석을 통해 구해지기 때문에, 본 논문에서는 구조변수의 오차를 감안하여 미지의 구조물의 현 상태를 통계적으로 반영하는 방법을 제시하였다. 제안된 방법들의 검증을 위해 주파수영역 SI기법을 적용하였으며, 구조변수 추정 결과를 통해 현장에서 계측하고자하는 진동형상의 수에 따른 최소 필요 가속도계의 개수를 제시하였다. 수치예제에서는 진동형상만을 이용한 최적위치 결정법인 EIDV기법과 제안된 MS-EIDV기법에 의해 추정된 구조 변수 결과를 비교하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.216-223
• /
• 2003

A time-domain system identification (SI) method is developed for seismic damage assessment on structures. SI algorithms for complete measurements with respect to degrees-of-freedom are proposed. To take account of nonlinear dynamic response, an equation error in the incremental dynamic governing equation is defined for complete measurement between measured and computed acceleration. Variations of stiffness and damping parameters during earthquake vibration are chased by utilizing a constrained nonlinear optimization tool available in MATLAB. A simulation study has been carried out to identify damage event and to assess damage severity by using measured acceleration time history. Mass properties are assumed as known a priori. The effects of measurement noise on the identification are also investigated.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.1-10
• /
• 2009

Inventory Management has become a very important issue in supply chain management, because inventories may be used as a means to accomplish the certain strategic goals in company decisions. RFID(radio frequency identification) technology is used to help manage inventories. It is known that the ideal control of inventories is to replenish item by item. This paper points out several misinterpretations from the Wal-mart report presented in '07 Seoul Forum and suggests the new direction of RFID application. In this paper we consider RFID as not 'identification technology' but 'information technology.' The 'RF-Kanban' suggested here is adopted from the'Kanban'concept of TPS(Toyota Production System). The RF-Kanban system shows the easier control for replenishing various items in boxes. Lots of inventories can be reduced through RF-Kanban System. This work develops the protocol of RF-Kanban and introduces the case study for easier understanding.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.647-649
• /
• 2004

We have synthesized phosphor in the system CaO-$Al_2O_3-SiO_2$ by combinatorial polymerized-complex method. The application of combinatorial synthesis and characterization of luminescent materials has been enlarged to identification and optimization in interesting new phosphor. In this study, we investigated luminescent properties of above-mentioned materials by excitation and emission spectra. In $Eu^{2+}$ activated $Ca_1Al_2Si_2O_8$ phosphor emit the blue light.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.880-885
• /
• 2024

For Safety Assisted Engineering works, real-time simulators have emerged as a mandatory tool among all the key actors involved in the nuclear industry (utilities, designers and safety authorities). EDF, Electricité de France, as the leading worldwide nuclear power plant operator, has a crucial need for efficient and updated simulation tools for training, operating and safety analysis support. This paper will present the work performed at EDF/DT to develop a new generation of engineering simulator to fulfil these tasks. The project is called SiRENE, which is the acronym of Re-hosted Engineering Simulator in French. The project has been economically challenging. Therefore, to benefit from existing tools and experience, the SiRENE project combines: - A part of the process issued from the operating fleet training full-scope simulator. - An improvement of the simulator prediction reliability with the integration of High-Fidelity models, used in Safety Analysis. These High-Fidelity models address Nuclear Steam Supply System code, with CATHARE thermal-hydraulics system code and neutronics, with COCCINELLE code. - And taking advantage of the last generation and improvements of instructor station. The intensive and challenging uses of the new SiRENE engineering simulator are also discussed. The SiRENE simulator has to address different topics such as verification and validation of operating procedures, identification of safety paths, tests of I&C developments or modifications, tests on hydraulics system components (pump, valve etc.), support studies for Probabilistic Safety Analysis (PSA). etc. It also emerges that SiRENE simulator is a valuable tool for self-training of the newcomers in EDF nuclear engineering centers. As a modifiable tool and thanks to a skillful team managing the SiRENE project, specific and adapted modifications can be taken into account very quickly, in order to provide the best answers for our users' specific issues. Finally, the SiRENE simulator, and the associated configurations, has been distributed among the different engineering centers at EDF (DT in Lyon, DIPDE in Marseille and CNEPE in Tours). This distribution highlights a strong synergy and complementarity of the different engineering institutes at EDF, working together for a safer and a more profitable operating fleet.

• Journal of information and communication convergence engineering
• /
• 제21권4호
• /
• pp.268-280
• /
• 2023

Several companies have migrated their existing monolithic web applications to microservice architectures. Consequently, research on the identification of microservices from monolithic web applications has been conducted. Meanwhile, the use-case model plays a crucial role in outlining the system's functionalities at a high level of abstraction, and studies have been conducted to identify microservices by utilizing this model. However, previous studies on microservice identification utilizing use-cases did not consider the components executed in the presentation layer. Unlike existing approaches, this paper proposes a technique that considers all three layers of web applications (presentation, business logic, and data access layers). Initially, the components used in the three layers of a web application are extracted by executing all the scenarios that constitute its use-cases. Thereafter, the usage rate of each component is determined for each use-case and the component is allocated to the use-case with the highest rate. Then, each use-case is realized as a microservice. To verify the proposed approach, microservice identification is performed using open-source web applications.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.36-43
• /
• 2016

Carbon fiber-reinforced silicon carbide (Cf-SiC) and SiC / SiC composites have high thermal conductivity, and excellent corrosion and wear resistance, a low coefficient for thermal expansion and are lightweight. This is why they are commonly used in parts of the aerospace industry to develop an aircraft thrust deflector, jet vane, combustion chamber, elevens, body flap, and a shingle. So, understanding how this state-of-the-art Cf-SiC affects both internal and external crack detection and determining issues during the manufacturing process of composite materials, should be evaluated according to valuation techniques in the external environment. In this paper, we apply a non-contact air ultrasonic technique of non-destructive testing techniques to perform a study on internal defect detection identification and assessment of carbon-fiber reinforced silicon carbide composites to perform basic research and applied research.