• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.295-302
• /
• 2011

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks(SFN) in the Advanced Television Systems Committee(ATSC) transmission systems and propose Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) thar overcomes the limitation of EDOCR(Equalization Digital On Channel Repeater) proposed by ETRI. The proposed IC-DOCR maintains the benefits of EDOCR that have good output signal quality removing multi-path, additive white Gaussian noise(AWGN). In additional, since the Interference Cancellation algorithm using the 8-VSB symbol demodulation of received signal removes the Interference of feedback signal, IC-DOCR improve the weakness of EDOCR that have low isolation between receive and transmit antenna so that can overcome the limitation of output signal power. we did analysis and verification of the proposed system performance using computational simulation.

• The Journal of Korean Medicine
• /
• v.30 no.5
• /
• pp.146-156
• /
• 2009

Objectives: The objective of this study was to investigate the antioxidant effects of manufactured Wen-pi-tang-Hab-Wu-ling-san (WHW$^{(R)}$) in vitro. Methods: WHW$^{(R)}$ was prepared by the pilot manufacture of WHW water extract from a GMP system appointed company. Antioxidative activities were determined by in vitro tests as follows: the scavenging activities of oxygen free radicals including 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, superoxide anion, hydrogen peroxide and nitric oxide radicals, as well as ferrous ion chelating capacity and Trolox equivalent antioxidant capacity (TEAC). Results: WHW$^{(R)}$ significantly scavenged oxygen free radicals such as DPPH (IC$_{50}$=115.28 $\pm$ 0.25 $\mu$g/$m\ell$), superoxide anion (IC$_{50}$=8.56 $\pm$ 0.08 $\mu$g/$m\ell$), hydrogen peroxide (IC$_{50}$=240.36 $\pm$ 3.41 $\mu$g/$m\ell$) and nitric oxide (IC$_{50}$=162.28 $\pm$ 0.21 $\mu$g/$m\ell$) radicals. WHW$^{(R)}$ also showed ferrous ion chelating activity (IC$_{50}$=543.19 $\pm$ 4.85 $\mu$g/$m\ell$) and Trolox equivalent effects (IC$_{50}$=45.311 $\mu$g/$m\ell$) in TEAC and ORAC assay, respectively. Conclusion: This study demonstrates that WHW$^{(R)}$ has strong antioxidative properties through free radical scavenging activity. These data suggest that WHW$^{(R)}$ be used as an antioxidant agent.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.453-460
• /
• 2008

This paper proposes a new multi-output LLC resonant converter by using single control IC, which has the tight-regulated dual output voltage without additional power devices and controller. The proposed converter has master and slave outputs, of which regulations are achieved by the PWM(pulse width modulation) and PFM(pulse frequency modulation), respectively. Different from the conventional dual-output LLC resonant converter, the proposed converter has no additional post-regulators like a boost converter. Therefore, it features a low cost, small size, and high efficiency. To confirm the validity and prove the superiority of proposed converter, simulated and experimental results on a 50" FHD PDP power set prototype are presented.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.61-72
• /
• 1992

This study was carried out to investigate the fracture behavior and the fracture criterion of yellow lauan(Shorea spp.), when has used for furniture and wood structures, and to offer a reliability for wood structure and basic data for wood fracture criterion in experiments which are fracture tested under mode I, mode II and mixed mode loading condition. The results were summarized as follows; 1. Fractures in specimens which have inclined grain in yellow lauan procedeed from crack tip in the radial direction along the grain. 2. In yellow lauan, $K_{IC}RL$ was 42.1kg/$cm^{3/2}$ and $K_{IIC}RL$ was 15.8kg/$cm^{3/2}$. 3. The fracture criteria of lauan were; ($K_I/K_{IC}$)+($K_{II}/K_{IIC}$)=1 in RL system with inclined grain at $45^{\circ}$, ($K_I/K_{IC}$)+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $15^{\circ}$ and $(K_I/K_{IC})^2$+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $30^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$, respectively. 4. The fracture criterion of wood could vary with the species, and the load applying condition. In order to measure the fracture criterion strictly, along with standardization of specimen geometry a large amount of experimental data is needed. 5. $K_{IC}$(critical stress intensity factor) can be predicted by grain angle. As the grain inclined angle increased, $K_{IC}$ and $K_{IIC}$ are increased.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2004

In this work, the diglycidylether of bisphenol A (DGEBA) and modified polyurethane (PU) blends were initiated by N-benzylpyrazinium hexafluoroantimonate (BPH). The cure and fracture toughness of neat DGEBA with the addition of PU were investigated. The cure properties of DGEBA/PU blend system were examined by DSC and near-IR measurements. The fracture touhtness were investigated by measuring the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$). According to the results, the maximum values of owe activation energy ($E_a$) and conversion (${\alpha}$) were found at 10 phr of PU. Also the $K_{IC}$ showed a similar behavior with the results of conversion. These results were probably due to increase of crosslinking density in the blends resulted from increase of the hydrogen bonding between the hydroxyl groups of DGEBA and isocyanate groups of PU.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.75-80
• /
• 2004

By the SOG (System-on-Glass) technology with excimer laser anneal process, the number of IC chips and the area of the mounted IC chips on the printed circuit board are reduced. In new circuit integrations on the glass substrate, we have developed D/A converter including the new capacitor array, amplifier comprising the original comparators and new display device with capturing images by integrated sensor into a pixel. This paper discusses the application of circuit integration of low-temperature poly-Si.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.922-924
• /
• 2002

현재 IC카드는 통신, 금융, 교통 등의 여러 응용 서비스에서 널리 사용되고 있는데, 계속적인 하드웨어 기술의 발전으로 인한 메모리 증가, CPU 성능 향상과, 통합된 정보 가전을 위한 다양한 형태의 네트워크 연결 인터페이스 구축 노력이 다중 응용 프로그램(Multi-Application) 사용 요구 및 개방형 운영체제(Open-platform Operating System)와 맞물려 도약적인 기술 발전을 이루고 있다. 본 고에서는 널리 사용되고 있으며 향후 시장성이 가장 클 것으로 예측되는 자바 카드 플랫폼 탑재 IC카드의 기술 현황을 H/W 및 S/W측면에서 살펴보고, 자바 카드 기술의 발전 동향을 조망하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1089-1092
• /
• 2007

New display technologies including LCD and plasma panels and Digital Light Projection (DLP) systems all offer large screens and impressive picture quality. However, flat-panel displays require a sophisticated picture processing to let these panels perform at their optimum levels. This paper explains why motion compensating techniques combined with frame rate conversion and quasi-impulse driving reduces motion blur and film judder for flat panel displays and presents the IC and its system application using this technique.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.349-352
• /
• 2002

In this Paper, we introduced 32 bit SOC implementation for multi-application Smart Card and described the methodology for reducing power consumption. It consists of ARMTTDMI micro-processor, 192 KBytes EEPROM, 16 KB SRAM, crypto processors and card reader interface based on AMBA bus system. We used Synopsys Power Compiler to estimate and optimize power consumption. Experimental results show that we can reduce Power consumption up to 62 % without increasing the chip area.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.223-231
• /
• 1994

생산시스템 기술이 점차 확대/발전되고, 가공시스템의 고 신뢰성, 효율성 향 상에 대한 관심이 집중되면서 시스템 관련하의 다양한 분야에서 체계적인 연구가 진행되고 있다. 그중 공구관리시스템에 관해서는 지금까지 많은 연구 가 되고 있으나 단순히 재고관리 관점에서 운용되거나, 부분적으로 open-loop 상황에서 사용되고 있다. 본 연구에서는 이러한 측면에서 생산현 장에 적합하고, 공작기계와의 Interface를 고려하여 IC(Integrated Circuit)를 이용한 공구식별시스템을 구축하므로써 Manufacturing Database에서 운용되 고, 공작기계와도 공구정보를 송/수신할 수 있는 shop floor연계형 TMS(Tool Management System)를 개발하고자 한다.