• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.269-272
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse cam. The main objection is the development of computer-aided design (CAD) program for simulating the motion of the cam-feeding mechanism using computer-graphics. A computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is independent of computer hardware used. The program is also interactive using a menu-selection technique. As the second part of the paper for the motion simulation of the cam-feeding system, this paper discusses the state-of-art for CAD. The first part of the paper presents the algorithm to simulate the notion of the cam-feeding mechanism.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.62-67
• /
• 2014

This study was performed to analyze the vulnerability of the situation in which combat system is shot by external projectile impacts. In developing combat system, it is vital to consider the survivability as well as its mission capability because it is directly connected with loss of lives. Especially, when the parts which are susceptible to fire are shot under battle situation, the system is exposed to the dangerousness and the situation when the parts such as fuel tanks are impacted by external projectile impacts can lead to flash fire as a result of the leakage of fuel. Therefore, in this study the possibility of flash fire was calculated by analyzing a variety of variables supposing that fuel tank in the combat system is shot. The aim of this study is to suggest effective methods in the basic steps when combat system is designed.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.103-110
• /
• 1997

In the development of large complex assembly, most design changes are from the following reasons.: 1) insufficient consideration of assembling sequence of downstream process. 2) interference and fit-up of related parts. 3) initial design changes which are not completely resolved. In order to reduce the first reason of above, the assembly-centric modeling methodology was proposed in the part (1) of the thesis. In this part (2), a Digital Mock-Up system, which is a tool to build a virtual mock-up in design stage, has been developed in order to prevent the other two reasons. The system can build a virtual assembly in various ways as followings.: 1) assembling parts which are located in user defined envelope. 2) assembling parts with the specified disciplines. 3) assembling parts that are selected in the part list. It can also make an assembly by the combination of above methods. In addition to that, it has the functions to read/write the virtual assembly and to explode parts of the assembly in desired direction. With the virtual assembly, engineers can design interference free parts without making physical mock-up. The system has been implemented with Oracle database management system in CATIA environment.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.194-199
• /
• 2003

Developed m this research is a production information system for marie propellers. The paper deals with surface modeling and tool path generation modules of the system. Since the input point data may have some errors, the data is examined using the 2nd divided difference. The point data is interpolated to a $G^2$ chord-length spline surface with some end-conditions. The effects of the various end-conditions on the interpolated surface are discussed in the paper. The tool paths for blade, fillet, and boss of the propeller are generated. Some illustrative examples from an industry are presented.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.89-96
• /
• 2001

Agent-mediated electronic markets have been a grow-ing area of agent research and developmen tin recent year. There exist a lot of e-commerce sites on the In-ternet(e.g. Priceline, com, Amazon, com etc). These e-commerce site have proposed new business models for effective and efficient commerce activity. Intelli-gent agents have been studied very widely in the field of artificial intelligence, For purpose of this paper, an agent can act autonomously and collaboratively in a network environment on behalf of its users. It is hard for people to effectively and efficiently monitor, buy, and sell at multiple e-commerce sites. If we intro-duce agent technologies into e-commerce systems, we can expect to further enhance the intelligence of their support. In this paper, we propose a new coopera-tion mechanism among seller agents based on exchang-ing their goods in our agent-mediated electronic market system. G-Commerce. On G-Commerce, seller agents and buyer agents negotiate with each other. In our model, seller agents cooperatively negotiate in order to effectively sell goods in stock. Buyer agents coopera-tively form coalitions in order to buy goods based an discount proices. Seller agent's negotiation goods. Our current experiments show that exchanging mechanism enables seller agents to effectively sell goods in stock. Also, we present the Pareto optimality of our exchang-ing mechanism.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.369-375
• /
• 2004

Gas turbine engine simulation in terms of transient, steady state performance and operational characteristics is complex work at the various engineering functions of aero engine manufacturers. Especially, efficiency of control system design and development in terms of cost, development period and technical relevance implies controlling diverse simulation and identification activities. The previous engine simulation has been accomplished within a limited analysis area such as fan, compressor, combustor, turbine, controller, etc. and this has resulted in improper engine performance and control characteristics because of limited interaction between analysis areas. In this paper, we propose a new simulation methodology for gas turbine engine performance analysis as well as its digital controller to solve difficulties as mentioned above. The novel method has particularities of (ⅰ) resulting in the integrated control simulation using almost every component/module analysis, (ⅱ) providing automated math model generation process of engine itself, various engine subsystems and control compensators/regulators, (ⅲ) presenting total sophisticated output results and easy understandable graphic display for a final user. We call this simulation system GT3GS (Gas Turbine 3D Graphic Simulator). GT3GS was built on both software and hardware technology for total simulation capable of high calculation flexibility as well as interface with real engine controller. All components in the simulator were implemented using COTS (Commercial Off the Shelf) modules. In addition, described here includes GT3GS main features and future works for better gas turbine engine simulation.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.828-838
• /
• 2022

Purpose: Through the establishment of a computerized system of risk assessment, the purpose is to analyze the case of whether the co-workers who are subject to the risk assessment at the construction site can easily fill it out and expect disaster reduction through efficient risk assessment activities. Method: By providing the risk factors and safety measures for the work by selecting the type of work, the risk estimation and the establishment of countermeasures can be made, and a system has been established to enable practical disaster prevention activities by presenting disaster cases for the work. Result: Through the analysis of the change in the scaled disaster rate for the years following the on-site application after the establishment of the risk assessment computer system of H Construction Company, it was confirmed that the scaled disaster rate of the domestic construction industry increased, while the conversion disaster rate of H Construction Company decreased. Conclusion: Through the computational systemization of risk assessments, workers in the field can easily access the risk assessment, evaluate the risk factors of the process and establish risk prevention measures, and it has been analyzed that there is an impact on the reduction of the disaster rate during the operational analysis period.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.539-555
• /
• 2008

It is well understood that developing new drugs is one of the highest value-added businesses in a country; however, the current governments' spending in pharmaceutical research and development(R&D) is minimal in Korea. This paper suggests that different governmental bodies should take in charge of different stages of the R&D process in order to maximize the use of limited government research funding. First, during the initial phase of the drug development, including clinical trials, the Ministry of Education, Science and Technology is the most appropriate governmental organization to support the research. For later procedures such as supporting the industries for exporting developed drugs, legislative approvals, and building infrastructure for future clinical trials should be supported by the Ministry of Knowledge and Economy and the Ministry of Health and Welfare along with the Korea Food and Drug Administration(KFDA). The KFDA, which is the main governmental agency approving newly developed drugs in the market, will need to take a crucial responsibility in the initial phase of the pharmaceutical R&D by guiding the industries with timely and proper information. As a first step, it is recommended to set up and operate a center for supporting new drugs, so that the industries can facilitate the development of marketable drugs which meet customers' needs. Later, in order to expedite the process of exporting and getting approvals of the newly developed drugs from foreign countries, it is necessary to develop new approval system, which includes introduction of the Good Manufacturing Practice (GMP), mandatory validation system, and education program for supporting expertise. Lastly, the KFDA needs to take an active role in developing Korean pharmaceutical industries by communicating with other foreign governments with regards to the globalization of the Korean pharmaceutical industries. For example, as a follow up after the Free Trade Agreement(FTA), active discussion on GLP of Mutual Recognition Agreement(MRA) with the United States of America, should be seriously considered.