• Journal of Multimedia Information System
• /
• 제8권1호
• /
• pp.11-16
• /
• 2021

This study developed a design to estimate the location of rescue demander using the sound system at disaster site, in the conditions of indoor positioning cannot be performed properly. It is a location tracing system through smart phone application. It generates sound wave information of rescuer at the rescue site, and it can be used as assistant means for indoor location tracing at the disaster site using sound wave receiving measurement technology.

• 벤처창업연구
• /
• 제16권5호
• /
• pp.49-59
• /
• 2021

산학협력 네트워킹을 통해 기업 구성원들의 경영인식, 시스템구축, 전략 운영이 기업성과에 미치는 영향력의 관계성을 연구하여 증명하였다.. 연구 결과 첫째, 산학협력 네트워킹의 중요성으로 시스템구축은 기업성과에 가장 큰 영향력을 제공하고 있는 것으로 나타났다. 둘째, 산학협력으로 구축된 기업 경영 인식의 구성원 공감 형성이다. 기업 경영 인식은 기업의 전략적 운영과정에서 중요한 요인으로 제시되었다. 셋째, 전략 운영의 중요성이다. 전략 운영은 기업성과와의 관계성이 높은 것으로 증명되었다. 넷째, 산학협력 네트워킹의 시스템구축과 전략운영과의 관계성을 증명하였다. 시스템구축은 기업의 전략 운영에 중요한 영향력을 제공한다. 다섯째, 산학협력으로 도출된 경영인식을 통한 시스템구축이다. 구성원들의 경영인식은 시스템구축에 유의한 영향력을 제공하는 것으로 나타났다. 마지막으로 경영인식과 기업성과 간의 관계성도 유의한 것으로 나타났다. 구성원들의 경영인식은 기업의 성과에 중요한 변수로 제안한다. 코로나 팬데믹 환경에서 중소기업이 가지는 구성원들의 경영인식은 기업성과에 높은 영향력을 제공하는 것으로 확인되었으며, 현장 개선과 정보 자산의 지속적 확보는 중소기업의 경쟁우위를 확보하는 주요 변수로 제안된다. 본 연구는 중소기업의 한계점을 산학협력을 통해 혁신성장의 기반을 마련하고 현장 중심의 창조적 프로세스 개선 방법과 구성원들과의 경영인식 공감대 형성, 프로그램 시스템 구축을 통한 중소기업의 경쟁력 확보 강화방안을 제안하였다는데 의의가 있다.

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.83-92
• /
• 2024

A hot-dip simulator was utilized to replicate abnormal coating buildup observed during line stops at galvanize lines, assessing the influence of processing conditions on buildup (up to 14 mm/side). Steel samples from 19 coils (comprising IF, BH, LCAK, HSLA, DP600-DP1180, Si: 0.006 - 0.8 wt%, P: 0.009 - 0.045 wt%) were examined to explore the phenomenon of heavy coating growth. It was discovered that heavy coating buildup (~3 mm/h) and rapid strip dissolution (~0.17 mm/h) in a GA or GI pot can manifest with specific combinations of steel chemistry and processing conditions. The results reveal the formation of a unique coating microstructure, characterized by a blend of bulky Zeta crystals and free Zn pockets/networks due to the "Sandlin" growth mechanism. Key variables contributing to abnormal coating growth include steel Si content, anneal temperature, dew point in heating and soaking furnaces, Zn pot temperature, Zn bath Al%, and cold-rolling reduction%. At ArcelorMittal Dofasco galvanize lines, an automatic online warning system for operators and special scheduling for incoming Si-bearing steels have been implemented, effectively preventing further heavy buildup occurrences.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권10호
• /
• pp.473-478
• /
• 2000

A more reliable algorithm for detecting a high impedance fault (HIF) requires voltage and current at the relaying point containing information of HIF characteristics including buildup/shoulder as well as nonlinearity/asymmetry. This paper presents a modeling method of an HIF in a distribution system. In order to do this, the proposed method uses two series time-varying resistances (TVRs) controlled by Transient Analysis of Control Systems (TACS) in EMTP. One TVR is employed for nonlinearity/asymmetry and then the other TVR for buildup/shoulder. The proposed method is implemented in EMTP and thus the voltage and current at the relaying point can be obtained.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.1-7
• /
• 2001

Use of high yield pulp and recycled fiber as raw materials and water system closure result in higher fines content and buildup of organic and inorganic contaminants in white water. These are detrimental for the effectiveness of chemical additives including retention aids. Thus it is imperative to employ a retention systems that maintains its efficiency in closed papermaking system for reducing fresh water consumption. The performance of four different microparticle retention systems including cationic polyacrylamide (C-PAM)/bentonite, highly charged cationic starch (HCS)/silica, C-PAM/micropolymer, cationic guar gum (CGG)/silica was evaluated and compared at three different levels of papermaking system closure. Buildup of detrimental substances in a closed white water system increased cationic demand and finally reduced the performance of retention systems. Cationic starch and guar gums maintained their effectiveness in retention in closed white water systems contaminated with anionic trashes because of their structural rigidity and hydrogen bonding ability. Particularly, cationic guar gums, due its stiffness of molecular structure, appeared perform better than catinonic starch.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2003년도 제27회 추계학술대회
• /
• pp.56-56
• /
• 2003

For the treatment of superficial tumors like squamous cell carcinoma of the head and neck, 6 MV photon beam is not appropriate and a spoiler is widely used to increase dose in the buildup region, while preserving the skin sparing effect. However, commercially available treatment planning systems assume a normal unspoiled beam, thereby cannot predict the buildup dose with spoiler accurately. We aimed to implement a Monte Carlo (MC) based planning system to apply it to the radiation treatment of head and neck. Lucite with thickness of 10-mm was used for the beam spoiler with Siemens Primus 6 MV photon beam. BEAM/DOSXYZ MC system was employed to model the linac and the spoiler. To verify the calculation accuracy of MC simulations, the percent depth doses (PDDs) and profiles with and without spoiler were measured using a parallel-plate chamber. For the MC based planning, we adopted a hybrid interface system between Pinnacle (Philips, USA) and BEAM/DOSXYZ to support treatment parameters of Siemens linac and the spoiler. The measurements of PDDs and profiles agreed with the corresponding MC simulations within 2% (lSD), which demonstrate the reliability of our MC simulations. The spoiler generated electrons make a contribution to the absorbed dose up to depth of 2cm, which shows that the dominant source of increased dose from spoiler system is the contaminating electrons created by the spoiler. The whole procedures necessary for MC based treatment planning were performed seamlessly between Pinnacle and BEAM/DOSXYZ system. This ability helps to increase the clinical efficiency of the spoiler technique. In conclusion, we implemented a MC based treatment planning system for a 6 MV photon beam with a spoiler. We demonstrate sophisticated MC technique makes it possible to predict dose distributions around buildup region accurately.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.113-115
• /
• 1999

A more reliable relaying algorithm for detecting a high impedance fault (HIF) requires fault currents at the relaying point containing information of various HIF characteristics as well as load conditions. As HIF characteristics, there are buildup, shoulder, nonlinearity and asymmetry. This paper presents a modeling method of a HIF in a distribution system using EMTP. In order to represent HIF characteristics, the proposed method uses two time-varying resistances. The first TVR models nonlinearity and asymmetry using voltage as the input. The second TVR models buildup and shoulder using time information as the input. The proposed method is implemented in EMTP.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1227-1233
• /
• 2004

Air handling unit (AHU)'s air filter pressure difference is important for energy consumption and indoor air quality. Both energy Performance data and air filter differential pressure of AHU in real office buildings were monitored and analyzed to investigate quantitatively energy impact as dust buildup level on air filter grows. We also modeled and simulated CAV system using HVACSIM＋ program to examine the energy effect of dust buildup on filters. Through analysis of time series pressure drop data, the filter pressure difference rate has been increased due to cumulative supply air flow rate increase. As filter pressure drop increased to 1 inch water column, it is found that the supply air flow rate was decreased by 10%, the chilled water flow rate was increased by 5.9% and the pump energy consumption was increased to 5.9%.

• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.52-62
• /
• 1992

국내 원자력 발전소의 주요 기종인 가압 경수로에서는 일차 냉각계통을 통한 부식생성물 (CRUD)의 이동에 의해 노심에서 방사화된 후 노외표면에 침적된 방사성 핵종은 원전 종사자 방사선 피폭의 주원인이 된다. 따라서, 부식생성물에 의한 방사선 피폭을 감소시키기 위한 최적 화학운전 방안이 요망된다. 본 연구에서는 운전중인 국내 4개 발전소의 실제 수화학 운전 자료를 분석하였으며, 냉각재 화학운전 자료를 평가하기 위해 냉각재 수화학 조건에 따라 방사능 생성양을 계산할 수 있는 Computer 코드를 이용하였다. 실제 수화학 운전조건과 가정된 Elevated Li 운전조건에 따른 운전결과를 Computer 코드에 의해 예측하여 비교한 결과, Elevated Li 수화학 운전방법을 적용할 경우, 현재 적용되는 수화학 운전방법에 비하여 노심에서 부식생성물의 침적을 감소시킴으로써 노외 방사능 양을 상당히 감소시킬 수 있음을 알았다. 또한 계통 구성재 질과 핵연료봉의 건전성이 보장되는 한 냉각재 pH를 상승시키면 노외 방사능 생성감소에 유리함을 밝혔다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.397-403
• /
• 2010

The Immersed boundary method(IBM) is one of CFD techniques which can simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In these cases, pressure buildup near IB was found to occur when linear interpolation and stadard mass conservation is used and the interpolation scheme became complicated when higher order of interpolation is adopted. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. Bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies.