• Solar Energy
• /
• v.2 no.1
• /
• pp.49-58
• /
• 1982

Aim of this study was to obtain the heating performance and the economic evaluation on solar heating system for greenhouse which area of floor was $90m^2$. For heating performance effective solar energy for the greenhouse was compared with overall heating loads including coefficient of heat transfer and conduction. And the economic evaluation solar heating system was evaluated by comparison its initial investiment costing with oil saving cost. Initial investiment costing included collector cost, storage cost, piping cost, control system cost and miscellaneous costs which included pumps, motors etc. The contents of this study included the survey of climate conditions for solar heating, long-term collector performance and optimum collector area of solar heating system in existing greenhouse. The results are follows: 1. Average horizontal radiation during winter was $2,434Kcal/m^2$ day which was the highest value in this country, so the climate conditions of Suwon was suitable for solar heating. 2. Resulting calculation of the optimum collector area was $30m^2$ and the solar energy accounted for 30% of the overall heating load. 3. The capacity of storage tank required 60 liter per unit area ($m^2$) of solar collector.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.122-129
• /
• 2008

Two-photon stereolithography is recognized as a promising process for the fabrication of three-dimensional (3D) microstructures with 100 nm resolution. Generally, beam-scanning system has been used in the conventional process of two-photon stereolithography, which is limited to the fabrication of micro-prototypes in small area of several tens micrometers. For the applications to 3D high-functional micro-devices, the fabrication area of the process is required to be enlarged. In this paper, large-area two-photon stereolithography (L-TPS) employing stage scanning system has been developed. Continuous scanning method is suggested to improve the fabrication speed and parameter study is conducted. An objective lens of high numerical aperture (N.A.) and high strength material were employed in this system. Through this work, 3D microstructures of $600*600*100\;{\mu}m$ were fabricated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.404-420
• /
• 2021

In this paper, an automatic system of locating the indoor area with weak or no mobile signal was proposed and demonstrated experimentally by using the Internet of Things (IoT) technology. Nowadays, the technicians of mobile services providers need to go along with numerous heavy equipment to measure and record the mobile signal strength at outside environment. Recently, there are systems proposed to do such measurement at outdoor area by using the IoT technology automatically. However, these works could not be applied in the indoor area since there are difficulties to do the indoor mapping and positioning. In this work, the Bluetooth Low Energy (BLE) was used to tackle these two difficulties. After a proper placement of BLE in the testing site, while the technician walk around with a handheld analyzer, the data can be obtained accordingly for further analysis in the proposed system which includes the construction of floor plan, detection of mobile signal strength and suggestion of indoor base stations. The gift wrapping and centroid algorithms were used during the analysis. The experimental results showed that the proposed system successfully demonstrated the indoor mapping, positioning of weak mobile signal area and suggestion of indoor base stations for the normal rectangular rooms with an area of 100 m² on single floor.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.141-146
• /
• 2024

A local area network (LAN) is a computer network within a small geographical area such as a home, school, computer laboratory, office building or group of buildings. A LAN is composed of interconnected workstations and personal computers which are each capable of accessing and sharing data and devices, such as printers, scanners and data storage devices, anywhere on the LAN. LANs are characterized by higher communication and data transfer rates and the lack of any need for leased communication lines. Communication between remote parties can be achieved through a process called Networking, involving the connection of computers, media and networking devices. When we talk about networks, we need to keep in mind three concepts, distributed processing, network criteria and network structure. The purpose of this Network is to design a Local Area Network (LAN) for a BAEC (Bangladesh Atomic Energy Commission) Head Quarter and implement security measures to protect network resources and system services. To do so, we will deal with the physical and logical design of a LAN. The goal of this Network is to examine of the Local Area Network set up for a BAEC HQ and build a secure LAN system.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.3
• /
• pp.81-90
• /
• 2017

Purpose: The regional trauma center should be a trauma treatment center equipped with facilities, equipment, and manpower capable of providing optimal treatment such as emergency surgery to a severely traumatized patient upon arrival at the hospital. In order to establish a medical system for effective severe diseases, it is necessary to prepare architectural planning guidelines for the regional trauma centers. Methods:: Analyze the spatial configuration, and the area composition of the regional trauma center, And to provide basic data for building a more efficient regional trauma center. The spatial composition analysis divides the space into initial care, resuscitation, patient area, nursing area, diagnostic test, staff training, staff support, public, and analyzes the area and interconnection of each space. Results: The area that must be included in the regional trauma center is the resuscitation area, the patient area, the diagnostic examination area, architectural planning should be designed to enhance the interconnection of the areas. IIn addition, a regional trauma center should be planned as a separate from the existing facility so that it can be installed and operated independently. Implications: A regional trauma center should be built as a stand alone operation and the space should be planned as a more efficient route.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.590-593
• /
• 2011

Time goes on, Ad Hoc network is hot issues. So far, there are a lot of protocols have been proposed for Ad Hoc routing protocol to support the mobility. This paper presents an enhanced DSDV(Destination-Sequenced Distance Vector) routing protocol which nominates one node to take care of a specific area. Simply Area-Aware(AA) DSDV routing protocol has one nominee to take care of some area. It has two jobs. One is to take care of its neighbour and another is to transfer the routing table to its other node as it works. It is called as Area Nominee(AN). The new scheme extends the routing table to include the nominee in the area. The general node is the same as the previous DSDV routing protocol. In the other hands, the node which is nominated has two routing protocols. One is for Regional Routing(RR) table which is the same routing table in DSDV. Another is Global Routing(GR) table which is about the area round its area which it cares nearby. GR table is the table for the designated node like the nominee. Each area has one nominee to transfer between ANs. It has only nominee's information about every area. This concept decreases the topology size and makes the information of topology more accurate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.7
• /
• pp.914-920
• /
• 2011

For a hydro turbine electricity generation system in river or bay, a venturi system could be applied to accelerate flow speed at the inlet of the turbine system in a flow field. In this study, a steady flow simulation was conducted to understand the effect of venturi system on the acceleration of current speed at the inlet of a hydro turbine system. According to the continuity equation, the flow speed is inversely proportional to the cross-section area in a conduit flow; however, it would be different in an open region because the venturi system would be an obstruction in the flow region. As the throat area is 1/5 of the inlet area of the venturi, the flow velocity is accelerated up to 2.1 times of the inlet velocity. It is understood that the venturi system placed in an open flow region gives resistance to the upcoming flow and disperses the flow energy around the venturi system. The result of the study should be very important information for an optimum design of a hydro turbine electricity generation system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.359-368
• /
• 2017

As the BadUSB is a vulnerability, in which a hacker tampers the firmware area of a USB flash drive. When the BadUSB device is plugged into the USB port of a host system, a malicious code acts automatically. The host system misunderstands the act of the malicious behavior as an normal behaviour for booting the USB device, so it is hard to detect the malicious code. Also, an antivirus software can't detect the tampered firmware because it inspects not the firmware area but the storage area. Because a lot of computer peripherals (such as USB flash drive, keyboard) are connected to host system with the USB protocols, the vulnerability has a negative ripple effect. However, the countermeasure against the vulnerability is not known now. In this paper, we analyze the tampered area of the firmware when a normal USB device is changed to the BadUSB device and propose the countermeasure to verify the integrity of the area when the USB boots. The proposed method consists of two procedures. The first procedure is to verify the integrity of the area which should be fixed even if the firmware is updated. The verification method use hashes, and the target area includes descriptors. The second procedure is to verify the integrity of the changeable area when the firmware is updated. The verification method use code signing, and the target area includes the function area of the firmware. We also propose the update protocol for the proposed structure and verify it to be true through simulation.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.907-916
• /
• 2017

Recently, various studies related to ICT convergence have been made. Recently, various studies related to ICT convergence have been made. In the academic field, the demand for ICT convergence is on the rise. For example, Digital Humanities and Area Informatics are representative. Area Studies means to study the culture of a specific area in an integrated way. In this regard, researchers who specialize in researching overseas area generally use websites to obtain information related to the area. The Multilingual Mediterranean Web Service System(MMWS), which is operated by the Institute for Mediterranean Studies of Busan University of Foreign Studies is a web site that provides professional and general information to researchers or ordinary people studying in the Mediterranean area among overseas area. In this paper, we analyzeoverseas web sites the MMWS and discuss how to activate web sites based on the analysis results. In details, it analyze MMWS through log analysis and use Google Analytics, a log analysis system provided by Google for analysis. Also study how to use ICT convergence contents as a website activation method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.57-70
• /
• 1990

This study is on system building and model case study to establish a new framework of "The Wild and Scenic Rivers System" and to apply this to Korean rivers. The Wild and Scenic Rivers System of the U. S. , which had become law in 1968 for establishing wild scenic and recreational river areas, was investigated. The techniques of two American case studies about the National Wild and Scenic Rivers System designation were investigated and synthesized, and study process was adjusted to Korean river system. Additionally, pilot study was carried out by the method and results were as follows : 1) In the American Wild and Scenic Rivers System, each river was evaluated based on eligibility criteria for designation, such as remarkable scenic, recreational, fish and wildlife, cultural or other ecological values. Segmented river areas were classified into three or four grades and management plans were prepared accordingly. 2) The management of rivers in Korea has emphasized on the flood control and water resources management up to the present, and now takes a growing interest in water quality. But it has been concerned very little with wild and scenic resources conservation of river corridors. It is strongly recommended to build Wild and Scenic Rivers System in Korea for rational management and conservation of the valuable natural resource. 3) Suggested evaluation criteria for the Korean Wild and Scenic Rivers System were wildness, wildlife and plants, hydrology, scenic quality, and historical and cultural resources. The river areas may be graded into four : Positive conservation area(I), Negative conservation area(II), Negative development area(III), Positive development area(IV). Management guidelines were proposed for each grade. 4) To test the applicability of the approach, one of the major tributary of the Han-River was selected for pilot study. The result showed that the evaluation and grading system worked well. Finally, it is recommended to incorporate the Wild and Scenic Rivers System into Korean national park system, and to amend the Korean National Park Act to enable this.