• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.569-572
• /
• 2005

Technological feasibility of using recently-available femtosecond ultra short pulse lasers for advanced precision length metrology is investigated with emphasis on absolute distance measurements with $10{\mu}m$ ??resolution over extensive ranges. The idea of using femtosecond lasers for the measurement of absolute distances is based on the fact that a short pulse train is a mode-locked combination of discrete monochromatic light components spanning a wide spectral bandwidth. The synthetic wavelength is created from the repetition frequency, $f_r$ of the femtosecond laser and for more precise resolution, higher-order harmonics of the repetition frequency may be selected as the synthetic wavelength by using appropriate electronic filters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.77-78
• /
• 2006

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.153.1-153.1
• /
• 2011

For the stars cooler than the Sun, it is difficult to determine the stellar parameters and chemical abundances because of the strong molecular lines in the optical region. Therefore the NIR high-resolution spectra, such as those obtained by IGRINS would be a solution to determine the stellar parameters for late-type stars, such as M dwarfs. As using the NIR high-resolution spectra, we are expecting that it would be more reliable to compare observed spectra with synthetic spectra for the stellar parameters. In order to confirm the method by using high-resolution spectra in NIR band, it should be cross-checked against the stellar parameters from optical high-resolution spectra. We have derived the stellar parameters of M dwarfs using the synthetic spectra in the long wavelength region of the optical spectra (over 8000 $\bar{A}$), which is relatively less contaminated by molecular lines as well as telluric lines.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.81-88
• /
• 1998

The aim of this study is to evaluate several plant extracts with a view to developing UV sunscreen agents. In this study, 150 plant extracts were screened to elucidate their UV spectra using spectrophotometric method. Several plant extracts such as Phellodendron amurense, Morus alba, Rhododendron mucronulatum, Brassica alba have strong absorbency at UVA region (350nm), the suntanning wavelength. And Sophora flavescens, Caesalpinia sapper, Morus alba, Phellodendron amurense, showed absorption plateau value at UVB region (308nm), the erythema action wavelength. These extracts have a good absorbency property as synthetic filter and could be served as substitutes for synthetic UV sunscreen agents.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.

• KSTLE International Journal
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2007

Chromatic device was developed using light emitting diodes, optic fibers and photodiodes. Chromatic ratio and total contamination parameters based on transmitted light intensity in Red, Green, and Blue wavelengths were used for oil chemical and particulate contamination assessment. Chromatic ratio criterion was found independent of the particulate contamination of oil; but depended on chemical degradation, being more sensitive for synthetic than mineral hydraulic oil. Total contamination index of the sensor depended on both the chemical degradation and particulate contamination of the oil; being most sensitive in blue wavelength, and least in the red. Test results for synthetic hydraulic oils monitored corroborated with results of other tests such as viscosity, total acid number, elemental optical emission spectroscopy, particulate counts and UV-VIS photospectrometry. Chromatic ratio showed a clearer indication of oil degradation, compared to key monitoring parameters such as total acid number, viscosity and particle counts. The results showed that these parameters are effective criteria for the condition monitoring of synthetic hydraulic oils.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.863-867
• /
• 2013

A series of azo disperse dyes having dicyanovinyl groups was synthesized by the Knoevenagel condensation with malononitrile from carbonyl substituted phenylazo disperse dyes which were prepared by conventional diazo coupling reaction of aniline derivatives as diazo components. A variety of coupling components such as anilines, an indole and a pyridone were used. The azo disperse dyes were evaluated for their spectral properties and dyeing assessment on the polyester fabrics. The azo disperse dyes containing dicyanovinyl groups showed bathochromic shifts and darker colors due to increased electron withdrawing strength in their azo components and extended conjugation by dicyanovinyl groups than their parent carbonyl substituted azo dyes. The dyes containing 2-acetylamino-5-methoxy substituent in the coupling component exhibited higher wavelength of maximum absorbance (${\lambda}_{max}$) and significant negative solvatochromism than those of other dyes due to intramolecular hydrogen bonding.

• Journal of Environmental Science International
• /
• v.12 no.1
• /
• pp.87-92
• /
• 2003

Synchronous spectrofluorimetry was carried out for the simultaneous determination of various polycyclic aromatic hydrocarbons(PAHs) in aqueous solution by fluorescence spectrometry have been studied. The optimal wavelength interval(${\triangle}{\lambda}$) for synchronous spectra of acenaphthene, anthracene, benzo[a]anthracene, fluorene and pyrene were investigated in the presence of surfactants. The great enhancement of the fluorescence of these PAHs in Triton X-100 was obtained and optimal wavelength was 50 nm. The calibration curves in synthetic mixture solution of 5 PAHs were linear over the range from $1.0{\times}10^{-8}M$ to $1.0{\tiems}10^{-4}M$. Under the optimal experimental conditions, the detection limits were $4.9{\tiems}10^{-9}M$,\;7.0{\times}10^{-9}M,\;4.7{\tiems}10^{-9}M,\;1.6{\tiems}10^{-9}M$ and $3.2{\tiems}10^{-9}M$ for acenaphthene, anthracene, benzo[a]anthracene, fluorene and pyrene, respectively.

• Journal of Integrative Natural Science
• /
• v.2 no.4
• /
• pp.289-292
• /
• 2009

Perchlorosilanes are useful precursors for the synthesis of hydrosilanes for the fabrication of electronic devices such as silicon thin-film transistors and silicon nanoparticles. For this solution process, requirements of precursors applicable to solution process are relatively low volatile and soluble in common organic solvents. In this work, the decaphenylcyclopentasilane has been obtained from the reaction of the lithium wire and dichlorodiphenylsilane. The reaction of decaphenylcyclopentasilane with lewis acid catalyst, HCl/$AlCl_3$, gives the perchlorocyclopentasilane. Decaphenylcyclopentasilane exhibits an unusual optical property. Its optical property was characterized by UV-vis and fluorescence spectroscopy. Absorption wavelength maxima for the decaphenylcyclopentasilane was 272 nm. Decaphenylcyclopentasilane displayed an emission band at 741 nm with excitation wavelength of 272 nm.

• Korean Journal of Materials Research
• /
• v.16 no.10
• /
• pp.624-628
• /
• 2006

In this study, divalent europium-activated $NaCaPO_4$ green phosphor powders were prepared by the chemical synthetic method followed by heat treatment in reduced atmosphere, and the crystal structures, morphologies and photoluminescent properties of the powders were investigated by x-ray powder diffraction, scanning electron microscope and spectrometer for the first time. The effects of Ca/P and Na/Ca mole ratios on the final products were also investigated. The influences of input amount change of europium as the activator on the light emission intensity were studied, and the resulting concentration quenching phenomenon was observed. The optimized synthesis conditions obtained in this study were Ca/P mole ratio 1.2, Na/Ca mole ratio 3.0 and 4 mole%Eu. The peak wavelength was 505 nm for all the samples. The result of excitation spectrum measurement indicated that the excitation efficiency was high for the long-wavelength UV region. It was thus concluded that the samples prepared in this study can be successfully applied for the light-emitting devices such as LED excited with long-wavelength UV light sources.