• 한국미생물·생명공학회지
• /
• 제25권3호
• /
• pp.305-310
• /
• 1997

For the continuous production of transglucosylated steviosides, cyclodextrin glucanotransferase from Bacillus macerans was immobilized onto Diaion HPA 75 (styrene-divinylbenzene resin) that was screened from ion exchange resins, synthetic adsorbents and chitosan derivatives. The parameters influencing enzyme immobilization were examined in order to maximize the activity of immobilized enzyme. The optimum conditions for immobilization turned out to be: contact time 2 hr at 30$circ$C, pH 6$sim$9, and enzyme loading 20mg protein/g resin at 4.4 Os/Kg as osmolarity. Competing with other molecules having low molecular weight, enzyme was immobilized reversibly. The activity of immobilized enzyme was as high as 180U/g resin when the diafiltrated solution of stock enzyme was used. The optimum conditions for transglucosylation were as follows: pH 6.0, temperature 50$circ$C, 30% substrate solution composed of 15% stevioside mixture and 15% dextrin of which value of dextrose equivalent was about 9.0.

• 방재기술
• /
• 통권15호
• /
• pp.11-21
• /
• 1993

This report is announced about thermal lag of painted heat detectors. Thermal lag is forecast result from painting the part of heat receiving. Test is simulated that heat detector is painted by synthetic resin emulsion paint according to the cricumstance of installation, corrosion, temperature, dust.

• Carbon letters
• /
• 제15권2호
• /
• pp.142-145
• /
• 2014

Isotropic synthetic graphite scrap and phenolic resin were mixed, and the mixed powder was formed at 300 MPa to produce a green body. New bulk graphite was produced by carbonizing the green body at $700^{\circ}C$, and the bulk graphite thus produced was impregnated with resin and re-carbonized at $700^{\circ}C$. The bulk density of the bulk graphite was $1.29g/cm^3$, and the porosity of the open pores was 29.8%. After one impregnation, the density increased to $1.44g/cm^3$ while the porosity decreased to 25.2%. Differences in the pore distribution before and after impregnation were easily confirmed by observing the microstructure. In addition, by using an X-ray diffractometer, the degrees-of-alignment (Da) were obtained for one side perpendicular to the direction of compression molding of the bulk graphite (the "top-face"), and one side parallel to the direction of compression molding (the "side-face"). The anisotropy ratio calculated from the Da-values obtained was 1.13, which indicates comparatively good isotropy.

• 한국의류학회지
• /
• 제2권1호
• /
• pp.125-131
• /
• 1978

This study was intended to clarify (1) the release of free formaldehyde (2) transfer of free formaldehyde to the contacted fabrics during storing, and (3) the removal effect of free formaldehyde by washing from resin finished fabrics. The results of this study were as follow; 1. The decrease rate of free formaldehyde content in fabrics was higher during storing in open air, poly bag, and glass tube in descending order and the content of free formaldehyde in fabrics was decreased in glyoxal resin finished but, increased in Melamine M-3 resin finished when the fabrics was stored in polybag and in glass tube. 2. Increased amount of formaldehyde transfer to contacted fabrics was noted with Melamine M-3 resin finished than that of glyoxal resin finished. Increased amount of formaldehyde transfer as well as more free formaldehyde were noted in cotton fabrics than in polyester/ cotton blend. 3. The effect of removing free formaldehyde from the fabrics was better in case of solid alkaline soap, synthetic alkaline powdered detergents, neutral detergents in descending order. The romoval of free formaldehyde was marked after the 1st washing and almost no increase in free formaldehyde was found after three times of washing. 4. After first washing, the content of formaldehyde in Melamine M-3 resin finished fabrics increased more rapidly than that of glyoxal resin finished fabrics in condition of closed storing.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.79-89
• /
• 2019

본 연구는 기존의 콘크리트 투수블록이 아닌 재활용 합성수지를 활용하여 제작된 투수블록의 열섬현상 완화의 기능성 측면인 표면온도의 저감효과를 확인하고자 야외계측과 실내실험을 진행하였다. 야외계측은 건조한 상태와 습윤상태를 고려하여 3일 동안 계측하였고, 실내실험은 건조 조건, 강우 모사 조건, 표층 습윤 조건 등으로 구분하여 온도의 변화와 실험 후 함수율의 증발비율을 확인하였다. 야외계측 결과, 가뭄이 지속되거나 일정수준의 수분이 표층에 없는 건조한 상태에서는 수분의 증발에 의한 기화잠열로 냉각효과가 발휘되기 보다는 투수블록 표면의 알베도에 의한 차이로 표면의 온도가 감소하는 것을 확인하였다. 실내실험 결과, 재생 합성수지 투수블록(RS 투수블록)은 콘크리트 투수블록보다 건조한 상태일때는 더 높은 표면온도를 기록하였으나 강우 모사조건에서는 공극내 수분의 증발이 모세관력에 의해 지속적으로 유지되어 더 높은 온도 저감율 보이는 것으로 나타났다. 실내실험 후 증발율을 측정한 결과 수분의 증발율이 높을수록 온도의 저감효과는 증가하는 것을 확인하였다. 이 결과를 바탕으로 증발율과 온도의 저감율에 대한 상관관계식을 도출하였다.

• 한국의류학회지
• /
• 제11권1호
• /
• pp.51-62
• /
• 1987

In this study, electrostatic behavior of polyester and nylon fabric treated with anti-static agents were investigated. The effects of the concentration of the agents and curing conditions on the electrostatic charge of the fabrics were studied. And washfastness, lightfastness and physicalproperties of the treated fabrics were also investigated. The results were as follows: 1) Polyethylene glycol alkylester was more effective in antistatic behavior than polyethylene laurylphosphate, and polyester is more effective in anti-static behavior than nylon. 2) Concentration of anti-static agents were suitable in concentration of $4\%$. 3) Glyoxal resin was more effective in anti-static behavior than melamine resin, and it was also good in the retaing anti-static behavior after treatments of lightfastness and washfastness. 4) As the condition of curing treatment, $190^{\circ}C$, 1min. for glyoxal resin and $130^{\circ}C$, 4min. for melamine resin is appropriate. 5) In comparison of anti-static behavior according to treating conditions, the simultaneous treatment was more effective than any other treatments. 6) Change of electrostatic charge of anti-static nylon cloths after treatments of lightfastness and washfastness increased greatly in above 10 laundering time and 20 fade-O-meter time. 7) In physical properties according to concentration of treating agents. decrease of physical properties scarcely appeared in concentration of treating agents $4\~5\%$.

• 대한치과보철학회지
• /
• 제9권1호
• /
• pp.23-27
• /
• 1969

The purpose of this studies is to determine the surface hardness of dental stone and to investigate the methods which increase the surface hardness of dental stone using the dissolved solution of various synthetic resin, the obtained results of hardness value calculated Rockwell Hardness Number by means of Rockwell Hardness Tester. 1) In this experiment, 10% polystyrene dissolved in 100cc amylacetate is excellent solution which provides the surface hardness of dental stone after setting of specimen, and there is no effective way that stone specimen is immersed into polystyrene in amylacetate, polystyrene in benzene and polystyrene in butylacetate above 1 hour. 2) When the stone specimen is immersed into acrylic resin in benzene and melamin resin in amylacetate at least 1 hour to 3 hours, the hardening effect of stone surface is valuable. 3) The stone specimen immersing into urea resin in butylacetate, the surface hardness of the stone specimen decreased within 1 hour, but increased after 3 houre. 4) For the separating medium, the easyfoil is superior to the olive oil in the aspect of improving the hardening effect of the immersed specimen.

• 환경위생공학
• /
• 제17권1호
• /
• pp.63-68
• /
• 2002

질소 주입하에 스틸렌과 디비닐벤젠의 양을 조절하면서 1%, 2% 및 5%의 가교도를 가진 공중합체를 합성하고 여기에 염화아연을 첨가하였다. 벤젠을 넣고 팽윤 시킨 다음 톨루엔 용매에서 요드화 칼륨과 21.93g의 1-aza-15-crown-5를 가하고 $55^{\circ}C$로 30시간 교반 환류하여 중감속 이온을 흡착 할 수 있는 기능성 수지를 합성하였다. 이들 수지는 가교도가 증가할수록 디비닐벤젠 함량이 증가하여 다공도가 작아져서 염소의 함량이 감소되고 이것이 치환 과정에서 거대고리 리간드에 영향을 주어 질소의 함량도 감소되었다. 그리고 기능성 합성수지의 형태는 수소와 염소 원자의 치환 반응으로 찌그러짐을 볼 수 있었다.

• 공업화학
• /
• 제21권2호
• /
• pp.142-147
• /
• 2010

1%, 2%, 10% 및 18%의 가교도를 가진 스타이렌(제4류 위험물 중 제2석유류) 디비닐벤젠 공중합체에 1-aza-18-crown-6 거대 고리 리간드를 치환반응으로 결합시켜 수지들을 합성하였으며, 이들 수지의 합성은 염소 함량과 원소 분석, 비표면적(BET), 그리고 IR-분광법으로 확인하였다. 물 소화약제로부터 합성수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간 그리고 수지의 가교도에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였고, 수용액에서 수지에 대한 흡착 선택성은 나트륨($Na^{1+}$) > 아연($Zn^{2+}$) > 크롬($Cr^{3+}$) 이온의 순서이며, 금속 이온의 흡착력은 1%, 2%, 10% 및 18%의 가교도 순이었다.

• 자원리싸이클링
• /
• 제31권3호
• /
• pp.73-80
• /
• 2022

폐리튬이온전지를 고온에서 용융환원하면 금속혼합물을 얻을 수 있다. 금속혼합물을 황산이나 염산으로 침출한 다음 용매추출로 분리한 여액에는 니켈(II), 코발트(II), 망간(II)과 실리케이트(IV)가 함유되어 있다. 본 논문에서는 양이온교환수지인 Diphonix와 P204를 사용하여 황산과 염산 합성용액에 함유된 상기 이온들의 이온교환거동을 조사했다. 용액의 pH가 3인 황산용액에서 니켈(II), 코발트(II)와 망간(II)이 선택적으로 Diphonix에 흡착되었다. 용액의 pH가 6인 염산용액에서는 망간(II)이 P204수지에 선택적으로 흡착되어 분리가 가능했다. Diphonix와 P204에 흡착된 금속이온은 황산이나 염산용액으로 세출할 수 있었다.