• Title/Summary/Keyword: Synthetic extract

Search Result 307, Processing Time 0.03 seconds

Utilization of Piper betle L. Extract for Inactivating Foodborne Bacterial Biofilms on Pitted and Smooth Stainless Steel Surfaces

  • Songsirin Ruengvisesh;Pattarapong Wenbap;Peetitas Damrongsaktrakul;Suchanya Santiakachai;Warisara Kasemsukwimol;Sirilak Chitvittaya;Yossakorn Painsawat;Isaratat Phung-on;Pravate Tuitemwong
    • Journal of Microbiology and Biotechnology
    • /
    • v.33 no.6
    • /
    • pp.771-779
    • /
    • 2023
  • Biofilms are a significant concern in the food industry. The utilization of plant-derived compounds to inactivate biofilms on food contact surfaces has not been widely reported. Also, the increasing negative perception of consumers against synthetic sanitizers has encouraged the hunt for natural compounds as alternatives. Therefore, in this study we evaluated the antimicrobial activities of ethanol extracts, acetone extracts, and essential oils (EOs) of seven culinary herbs against Salmonella enterica serotype Typhimurium and Listeria innocua using the broth microdilution assay. Among all tested extracts and EOs, the ethanol extract of Piper betle L. exhibited the most efficient antimicrobial activities. To evaluate the biofilm inactivation effect, S. Typhimurium and L. innocua biofilms on pitted and smooth stainless steel (SS) coupons were exposed to P. betle ethanol extract (12.5 mg/ml), sodium hypochlorite (NaClO; 200 ppm), hydrogen peroxide (HP; 1100 ppm), and benzalkonium chloride (BKC; 400 ppm) for 15 min. Results showed that, for the untreated controls, higher sessile cell counts were observed on pitted SS versus smooth SS coupons. Overall, biofilm inactivation efficacies of the tested sanitizers followed the trend of P. betle extract ≥ BKC > NaClO > HP. The surface condition of SS did not affect the biofilm inactivation effect of each tested sanitizer. The contact angle results revealed P. betle ethanol extract could increase the surface wettability of SS coupons. This research suggests P. betle extract might be utilized as an alternative sanitizer in food processing facilities.

Efficacy and Reusability of Commercial Adsorbent for Isolation of Proanthocyanidins from Hot Water Extract of Pinus radiata Bark

  • Mun, Sung Phil
    • Journal of the Korean Wood Science and Technology
    • /
    • v.42 no.2
    • /
    • pp.207-213
    • /
    • 2014
  • This study was carried out to investigate the feasibility and usefulness of a commercial synthetic adsorbent, Diaion HP 20, for the isolation of proanthocyanidins (PAs) from hot water extract (HWE) prepared from Pinus radiata bark. Most ultraviolet (UV) absorbing materials in HWE were adsorbed onto Diaion HP 20 and easily recovered by simple ethanol (EtOH) washing. More than 50% of the UV absorbing materials were adsorbed within 20 minutes, and the adsorption equilibrium was reached within 3 h. The recovered materials from Diaion HP 20 were mostly composed of PAs, but some monomeric flavonoids such as taxifolin and unidentified hydrophobic materials were also adsorbed. The impurities such as carbohydrates and inorganic materials contained in HWE were mostly removed by Diaion HP 20. The adsorption ability of the UV absorbing materials onto Diaion HP 20 was almost the same as the first cycle even after 14 times of repeating cycles of adsorption and desorption. The radical scavenging ability of the recovered materials from the adsorbent was slightly higher than that of the pure PAs prepared by Sephadex LH 20 from the same HWE.

Efficient Recovery of Lignocellulolytic Enzymes of Spent Mushroom Compost from Oyster Mushrooms, Pleurotus spp., and Potential Use in Dye Decolorization

  • Lim, Seon-Hwa;Lee, Yun-Hae;Kang, Hee-Wan
    • Mycobiology
    • /
    • v.41 no.4
    • /
    • pp.214-220
    • /
    • 2013
  • This study was conducted in order to perform efficient extraction of lignocellulolytic enzymes amylase (EC 3.2.1.1), cellulase (EC 3.2.1.4), laccase (EC 1.10.3.2), and xylanase (EC 3.2.1.8) from spent mushroom compost (SMC) of Pleurotus ostreatus, P. eryngii, and P. cornucopiae. Optimal enzyme recovery was achieved when SMCs were extracted with 50 mM sodium citrate (pH 4.5) buffer at $4^{\circ}C$ for 2 hr. Amylase, cellulase, and xylanase activities showed high values in extracts from P. ostreatus SMC, with 2.97 U/g, 1.67 U/g, and 91.56 U/g, respectively, whereas laccase activity and filter paper degradation ability were highest in extracts from P. eryngii SMC, with values of 9.01 U/g and 0.21 U/g, respectively. Enzymatic activities varied according to the SMCs released from different mushroom farms. The synthetic dyes remazol brilliant blue R and Congo red were decolorized completely by the SMC extract of P. eryngii within 120 min, and the decolorization ability of the extract was comparable to that of 0.3 U of commercial laccase. In addition, laccase activity of the SMC extract from P. eryngii was compared to that of commercial enzymes or its industrial application in decolorization.

Green Synthesis of Nanoparticles Using Extract of Ecklonia Cava and Catalytic Activity for Synthetic Dyes

  • Kim, Beomjin;Song, Woo Chang;Park, Sun Young;Park, Geuntae
    • Journal of Environmental Science International
    • /
    • v.29 no.12
    • /
    • pp.1171-1184
    • /
    • 2020
  • The green synthesis of inorganic nanoparticles (NPs) using biomaterials has garnered considerable attention in recent years because of its eco-friendly, non-toxic, simple, and low-cost nature. In this study, we synthesized NPs of noble metals, such as Ag and Au using an aqueous extract of a marine seaweed, Ecklonia cava. The formation of AgNPs and AuNPs was confirmed by the presence of surface plasmon resonance peaks in UV-Vis absorption spectra at approximately 430 and 530 nm, respectively. Various properties of the NPs were evaluated using characterization techniques, such as dynamic light scattering, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. Phytochemicals in the seaweed extract, such as phlorotannins, acted as both reducing and stabilizing agents for the growth of the NPs. The green-synthesized AgNPs and AuNPs were found to exhibit high catalytic activity for the decomposition of organic dyes, including azo dyes, methylene blue, rhodamine B, and methyl orange.

Markable Green Synthesis of Gold Nanoparticles Used As Efficacious Catalyst for the Reduction of 4-Nitrophenol

  • Rokade, Ashish A.;Yoo, Seong Il;Jin, Youngeup;Park, Seong Soo
    • Clean Technology
    • /
    • v.26 no.4
    • /
    • pp.251-256
    • /
    • 2020
  • The biocompatibility and plasmonic properties of Au nanoparticles make them useful for photothermal therapy, drug delivery, imaging, and many other fields. This study demonstrated a novel, facile, economic, and green synthetic method to produce gold nanoparticles. Gold nanoparticles (AuNPs) with spherical and triangular shapes were effectively synthesized using only Schisandra chenesis fruit extract as the capping and reducing agent. The shape of the AuNPs could be engineered simply by adjusting the molar concentration of HAuCl4 in the reaction mixture. The as-synthesized AuNPs were characterized using UV-VIS spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), dynamic light scattering (DLS), and energy dispersive X-ray analysis (EDXA). This study revealed that by using the HAuCl4 concentration in the AuNP synthesis, the shape and size of the AuNPs could be controlled by the concentration of HAuCl4 and Schisandra chinensis fruit extract as a surfactant. The as-synthesized AuNPs samples had sufficient colloidal stability without noticeable aggregation and showed the predominant growth of the (111) plane of face-centered cubic gold during the crystal growth. The catalytic efficiency of the AuNPs synthesized using Schisandra chenesis fruit extract was examined by monitoring the catalytic reduction of 4-nitrophenol to 4-aminophenol using Ultraviolet-visible spectroscopy (UV-Vis spectroscopy). The synthesized AuNPs showed good catalytic activity to reduce 4-nitrophenol to 4-aminophenol, revealing their practical usefulness.

The physiological characteristics of Pleurotus Ferulae Lanzi. (아위버섯의 생리적 특성)

  • 채정기;김대식;서승현;김현석;장경수;윤대령;오득실;차월석;이병래
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2002.11b
    • /
    • pp.58-58
    • /
    • 2002
  • This study was excuted to decide the physiological characteristics of Pleurotus Ferulae Lanzi. P. Ferulae Lanzi. was tested to select pertinent substract, temperature and pH range for the growth. Mycelial growth of P. Ferulae Lanzi. was mostly supported on MYPA among other tested synthetic or semi-synthetic media. The temperature range for pertinent mycelial growth was about 25~32$^{\circ}C$ and mostly stimulated at $25^{\circ}C$. And the pertinent pH range of MYPA was 5.0~6.0. The required carbon and nitrogen source for mycelial growth of P. Ferulae Lanzi. was tested. The mycelial growth was mostly stimulated by soluble starch at content. The carbon sources for pertinent mycelial growth was starch or maltose. And the nitrogen source for pertinent mycelial growth was yeast extract.

  • PDF

Antifungal Activity Against Colletotrichum spp. of Curcuminoids Isolated from Curcuma longa L. Rhizomes

  • Cho Jun-Young;Choi Gyung-Ja;Lee Seon-Woo;Jang Kyoung-Soo;Lim He-Kyoung;Lim Chi-Hwan;Lee Sun-Og;Cho Kwang-Yun;Kim Jin-Cheol
    • Journal of Microbiology and Biotechnology
    • /
    • v.16 no.2
    • /
    • pp.280-285
    • /
    • 2006
  • Methanol extract of the rhizomes of turmeric, Curcuma longa L., effectively controlled the development of red pepper anthracnose caused by Colletotrichum coccodes. In addition three antifungal substances were identified from the methanol extract of C. longa rhizomes as curcumin, demethoxycurcumin, and bisdemethoxycurcumin using mass and $^{1}H-NMR$ spectral analyses. The curcuminoids in a range $0.4-100\;{\mu}g/ml$ effectively inhibited the mycelial growth of three red pepper anthracnose pathogens, C. coccodes, C. gloeosporioides, and C. acutatum. The three curcuminoids inhibited mycelial growth of C. coccodes and C. gloeosporioides to an extent similar to the synthetic fungicide dithianon did, but the synthetic agent was a little more effective against C. acutatum. The curcuminoids also effectively inhibited spore germination of C. coccodes, and bisdemethoxycurcumin was the most active. Among the three curcuminoids, only demethoxycurcumin was effective in a greenhouse test in suppressing red pepper anthracnose caused by C. coccodes.

Use of the Synthetic Gene Encoding the Truncated Human Rotavirus VP8* Protein in Escherichia coli for Production of Vaccine Candidates or Development of Diagnostic Antibodies (합성 유전자를 이용하여 Escherichia coli에서 백신 후보의 생산 혹은 진단용 항체의 개발을 위한 인간 rotavirus VP8* 부분 단백질의 발현)

  • Kim, Sang-Rae;Lee, Bheong-Uk
    • Journal of Life Science
    • /
    • v.28 no.4
    • /
    • pp.478-482
    • /
    • 2018
  • Human rotavirus is a causative agent of acute diarrhea among children. The artificial gene encoding the truncated $VP8^*$ protein of human rotavirus A (serotype 1 strain WA) was synthesized according to the Escherichia coli codon preference. The synthetic $VP8^*$ gene also possessed the NdeI and HindIII restriction sites for the convenient in-frame cloning for translation and a 6-histidine tag at C-terminus for Ni+ affinity purification. Molecular weight of the truncated $VP8^*$ protein deduced from the nucleotide sequences of the artificial gene was a 19.7-kDa. This synthetic $VP8^*$ DNA fragment was inserted into the pT7-7 expression vector and transformed into E. coli BL21 (DE3). Transformants harboring the synthetic gene encoding the $VP8^*$ protein was induced by supplement of a final concentration of 0.05 mM ITPG at $20^{\circ}C$. Protein crude extract from the E. coli transformants was subjected to Western blotting with the mouse anti-rotavirus capsid antibody, showing ~20-kDa $VP8^*$ protein band. The truncated $VP8^*$ protein band was also observed by Western blotting using the rabbit polyclonal antibody serum made against the truncated $VP8^*$ protein. This study suggested that the synthetic gene could be used as an easy way to produce the antigenic vaccine candidate for control of virus-associated diseases or to develop antibodies for diagnostic purpose.

Assessment of DEM Generated by Stereo C-band and X-band SAR images using Radargrammetry (Radargrammetry를 이용한 C-밴드 및 X-밴드 SAR 위성영상의 DEM 생성 평가)

  • Song, Yeong Sun;Kim, Gi Hong
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.21 no.4
    • /
    • pp.109-116
    • /
    • 2013
  • To extract the 3D geometric information from SAR(Synthetic Aperture Radar) images, two different techniques, interferometric SAR and radargrammetry, have been widely used. InSAR is most widely used for the generation of precise DEM(Digital Elevation Model) until now. But, Interferometric SAR requires severe temporal correlation over areas covered with vegetation and high relief areas. Because radargrammetry is less sensible to temporal correlation, it can provide better results than interferometric SAR in certain, especially X-band SAR. In this paper, we assess the properties of DEMs generated by radargrammetry using stereo C-band RADARSAT-1 images and X-band TerraSAR-X images.

Development of SAR Image Quality Performance Analysis Tool for High Resolution Spaceborne Synthetic Aperture Radar (고해상도 위성 SAR 영상품질 성능 분석 툴 개발)

  • Oh, Tae-Bong;Jung, Chul-Ho;Song, Sun-Ho;Shin, Jae-Min;Kwag, Young-Kil
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.38 no.2
    • /
    • pp.188-194
    • /
    • 2010
  • In this paper, the typical Synthetic Aperture Radar (SAR) image quality parameters and analysis method are defined, and the SAR image analysis tool is presented for SAR image evaluation. The structure of the developed SAR image analysis tool consists of four key modules; point target analysis (PTA) module, distributed target analysis (DTA) module, ambiguity analysis (AMA) module, and NESZ analysis (NESZA) module. The developed tool is able to extract the various SAR system parameters from standard SAR product format files. Based on these extracted system parameters, typical SAR image quality parameters are derived from SAR image data.