• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.333-340
• /
• 2013

The purpose of this paper is to evaluate facade design factors of old dwellings using a Fuzzy Analytical Hierarchy Process (AHP) based on a pairwise comparison analysis using "Façade Design Factors" as evaluation criteria. Traditional old dwellings were presented and evaluated. A Fuzzy AHP based model was used for pairwise comparison of traditional old dwellings, whereby seven criteria and nine alternatives were described through a questionnaire and constructional data. The Fuzzy AHP was used to determine the impact of the facade design factors, because "Traditional" old dwellings are identified by the combination of their facade design factors. Furthermore, the fuzzy AHP is used to verify the feasibility and efficiency of this approach as well as for extent analysis to comprehend the priority of the traditional old dwellings using a sensibility measuring scale.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4041-4046
• /
• 2010

Wholly aromatic polyesters having flexible alkoxy side chain were synthesized by direct polycondensation. The synthetic polymers have been characterized by $^1H$-NMR, FT-IR. DSC, TGA, optical polarizing microscope and X-ray diffractometer. The inherent viscosities (${\eta}_{inh}$) measured in 1,1,2,2-tetrachloroethane (TCE) were 0.46~2.41 dL/g. The polymers having side chain showed double melting transition, ie, solid-sanidic liquid crystalline (LC) phase transition ($T_{m1}$) and sanidic LC phase-nematic LC phase transition ($T_{m2}$). As incresing length of alkoxy side chain, phase transition temperatures decreased and solubilities in organic solvents incresed. The peaks of $2{\theta}\;{\simeq}5$ and $2{\theta}\;{\simeq}20$ in X-ray diffractograms are due to crystallization of polymer main chain and of long side chain, respectively.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.85-90
• /
• 2006

RFID(Radio Frequency IDentification) is appearing by point technology by Ubiquitous environment of new paradigm and Logistics' application But, RFID chip of this is high price and short bandwidth, low power and interference etc. can become technological problem This is getting into obstacle in common use. Reader and tag, Embedded software etc.. that are accomplishing standardization are imported paying most expensive royalty. This paper deals with a RFID cognition system that use PDA under ubiquitous environment to apply to Logistics system A RFID cognition system processes input/output of fundamental information attaching a tag onto products. And a RFID cognition system supports quick, correct and sqfe synthetic Logistics managerial system through construction of database. This can minimize logistics costs and improve the quality of customer service. A RFID cognition system has advantage that can widen range of application to area that cognition system of existent fixing style can not do. Also, it can expect economical effect through inexpensive system construction.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.66-71
• /
• 2008

A new route to phthalocyanine complexes were developed to synthesize these products by fusion in the absence of solvent. This new method of synthesis without using solvent has advantages over the conventional synthetic methods since there are no risk of explosion and formation of harmful vapor from organic solvent. Reaction of PcFe with axial ligands such as $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine] and $PcFe(VIM)_2$[VIM: 1-Vinylimidazole] afforded powderlike, pure dark greenish blue colored products. The resulted products are soluble in $CH_2Cl_2$ and found to be complexes of the type $PcFeL_2$. Spectral properties were studied with ATR-FTIR and UV/Vis. Thermal and electrical characterization was also performed. Phthalocyanine complexes exhibit useful properties such as UV/Vis blocking, antistatic characteristics and excellent thermal stability and we anticipate various applicability in numerous products.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.305-312
• /
• 2017

The most effective way to distinguish subsurface interfaces that produce various geophysical responses is through the integration of multiple geophysical methods, with each method detecting both a complementary and unique set of distinct physical properties relating to the subsurface. In this study, shallow seismic reflection (SSR) and ground penetrating radar (GPR) surveys were conducted at the Cheongju-Gadeok site of the Korea National Groundwater Monitoring Network to map the water table, which was measured at 12 m depth during the geophysical surveys. The water table proved to be a good target reflector in both datasets, as the abrupt transition from the overlying unsaturated weathered rock to the underlying saturated weathered rock yielded large acoustic impedance and dielectric constant contrasts. The two datasets were depth converted and integrated into a single section, with the SSR and GPR surveys conducted to ensure subsurface imaging at approximately the same wavelength. The GPR data provided detailed information on the upper ~15 m of the section, whereas the SSR data imaged structures at depths of 10-45 m. The integrated section thus captured the full depth coverage of the sandy clay, water table, weathered rock, soft rock, and hard rock structures, which correlated well with local drillcore and water table observations. Incorporation of these two geophysical datasets yielded a synthetic section that resembled a simplified aquifer model, with the best-fitting seismic velocity, dielectric constant, and porosity of the saturated weathered layer being $v_{seismic}=1000m/s$, ${\varepsilon}_r=16$, and ${\phi}=0.32$, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.6
• /
• pp.1120-1127
• /
• 2017

Marasmius scorodonius secretes an extracellular laccase in potato dextrose broth, and this enzyme was purified up to 206-fold using $(NH_4)_2SO_4$ precipitation and a Hi-trap Q Sepharose column. The molecular mass of the purified laccase was estimated to be ~67 kDa by SDS-PAGE. The UV/vis spectrum of the enzyme was nontypical for laccases, and metal content analysis revealed that the enzyme contains 1 mole of Fe and Zn and 2 moles of Cu per mole of protein. The optimal pH for the enzymatic activity was 3.4, 4.0, and 4.6 with 2,2'-azino-bis(3-ethylbenzothazoline-6-sulfonate) (ABTS), guaiacol, and 2,6-dimethoxy phenol as the substrate, respectively. The optimal temperature of the enzyme was $75^{\circ}C$ with ABTS as the substrate. The enzyme was stable in the presence of some metal ions such as $Ca^{2+}$, $Cu^{2+}$, $Ni^{2+}$, $Mg^{2+}$, $Mn^{2+}$, $Ba^{2+}$, $Co^{2+}$, and $Zn^{2+}$ at a low concentration (1 mM), whereas $Fe^{2+}$ completely inhibited the enzymatic activity. The enzymatic reaction was strongly inhibited by metal chelators and thiol compounds except for EDTA. This enzyme directly decolorized Congo red, Malachite green, Crystal violet, and Methylene green dyes at various decolorization rates of 63-90%. In the presence of 1-hydroxybenzotriazole as a redox mediator, the decolorization of Reactive orange 16 and Remazol brilliant blue R was also achieved.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.659-666
• /
• 2009

CALVAL (Calibration & Validation) shall consider payloads characteristics because satellites have one and/or several payloads in order to perform their various missions. SAR satellite, one of various satellite, shall need to use special ground targets, which can reflect the radar signal to the satellite, because it can see objects with reflected radar signal. Therefore, the special ground targets, which are called generally reflector(corner reflector is the one of them) shall be installed and constructed on the ground path. The satellite must access the targets on that path. To accomplish successful calibration, the CALVAL site including corner reflectors will be surveyed and analyzed using various environment characteristics. In this paper, CALVAL site including point targets(corner reflector) for absolute radiometric calibration except one including distributed targets for relative radiometric calibration has been deeply considered.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.4
• /
• pp.186-192
• /
• 2011

Objective: Since IVF program was first established, various types of media and culture systems have been developed either in-house or commercially. The aim of this study was to compare the efficacy of in-house Maria Research Center (MRC) media to that of commercially available Sydney IVF media in human day 3 embryo transfer cycles. Methods: Three hundred sixty nine couples were included in this prospective, randomized, and comparative study. All couples undergoing IVF treatment at the Maria Fertility Hospital were randomly assigned to either Sydney IVF (n=178) or MRC (n=191) media. Results: No difference was observed between the MRC media and Sydney IVF media groups with respect to fertilization rate (74.4% vs. 75.5%). The clinical pregnancy and implantation rates of MRC media (47.1% and 20.0%, respectively) were also similar to those of Sydney IVF media (44.4% and 19.4%, respectively). However, the proportion of embryos with good quality on day 3 was significantly higher in the MRC media group than the Sydney IVF media group (50.2% vs. 43.2%) ($p$ <0.05). Conclusion: MRC media were as effective as Sydney IVF media for sustaining embryo development and pregnancy rates. The present study implies that MRC media can be a suitable alternative to commercially available media for human IVF-ET program.

• Elastomers and Composites
• /
• v.43 no.3
• /
• pp.173-182
• /
• 2008

Rubber-pad forming process for materials such as metal in which portions of the die which act upon the material is composed of a natural or synthetic rubber or elastomer material. This makes the rubber pad forming process relatively cheap and flexible, high accuracy for small product series in particular. In this study, we carried out the physical test and finite element analysis of elastomer such as natural rubber and urethane for steel rack rube forming. The non-linear property of elastomer which are described as strain energy function are important parameter to design and evaluate of elastomer component. These are determined by material tests which are uni-axial tension and bi-axial tension. This study is concerned with simulation and investigation of the significant parameters associated with this process.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.991-995
• /
• 2006

The layered double hydroxide with the insertion of chloride ions (LDH-Cl), which was synthesized by the co-precipitation method, was applied to investigate the fundamental aspects of the absorptive agent for phosphate removal from wastewater. The adsorption capacity was best described by the Langmuir-FreundIich isotherm, and the estimated isotherm parameters indicate that the LDH-CI capacity for the phosphate removal is much higher than that observed using a natural adsorbent material such iron oxide tailing. The kinetic experiment also showed that the LDH-Cl adsorption reaction rapidly at the adsorptive rate of 0.55 mg-P/g-LDH/min, implying that this adsorbent can be of use in the full-scale applications. The pH had a minimal effect on the LDH adsorption capacity in the range of 5 to 11, although the capacity dropped at the low pHs because of the change in LDH surface properties. Furthermore, other anions such as $Cl^-$ and $NO_3{^-}$ commonly found in the wastewater streams insignificantly affected the phosphate removal efficiencies, while $HCO_3{^-}$ ions had a negative effect on the LDH adsorption capacity due to its high selectivity. The phosphate removal experiment using the actual secondary effluent from a wastewater treatment plant showed the similar decrease in adsorption capacity, indicating that the bicarbonate ions in the wastewater were competing with phosphate for the adsorptive site in the surface of the LDH-Cl. Overall, the synthetic adsorbent material, LDH-Cl, can be a feasible alternative over other conventional chemical agents, since the LDH-Cl exhibits the high phosphate removal capacity with the low sensitivity to other environmental conditions.