• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.173-179
• /
• 1998

The processing conditions for the synthesis of platelet WS$_2$ lubricant powder through the solid-gas reaction were optimized. The tungsten and sulfur powders were sealed in a vacuum of 10$^{-6}$ torr, prior to heat-treating at 850$\circ$C for 8 days. The react~on product showed the well-developed platelet WS$_2$ powder with an average size of 3.8 $\mu$m. The synthesized WS$_2$ powder was coated on the commercial deep grooved ball bearing (No. 6203) to examine the effects of WS$_2$ coating layer on the noise and endurance of the ball bearing. The level of noise obtained from WS$_2$ coated-ball bearing was higher (56 dB) than the value occurred in the case of greece (37 dB). The life-time of the ball-bearing assembled after coating WS$_2$ powder increased 50 times compared to the non-coated bali-bearing.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.67-69
• /
• 1957

The synthetic method of tetramethyl-4,4'-diaminobenzophenone accomplished by W. Michler is to pass gaseous carbonyl chloride in dimethylaniline until theoretical value of weight increases at room temperature and synthesize the ketone by heating it at above 120$^{\circ}C. In the result of the experiment to synthesize the ketone by Michler's method, it was observed that if gaseous phosgen was to be used at room temperature according to the method, the gas inhaling tube would be closed up by reaction products (gruel-like crystals) before the theoretical amount of gases passed in and causing difficulty for gas to be produce or inhaled With a view to remove the difficulty, the author examined an article published by W. Michler entitled. "The synthesis of organic acid with phosgen" and guessing that the use of liquid phosgen could overcome the difficulty, succeeded in synthesizing the substance in good yield easily by reacting dimethylaniline with phosgen that was condensed into liquid state.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.784-787
• /
• 2008

Nanoscale $YVO_4:Eu^{3+}$ phosphor has been synthesized by a mild hydrothermal reaction at various experimental conditions. The particle and luminescent properties of nanophosphors were characterized with X-ray diffraction, electron microscopy and photoluminescence. It has been found that pH value play a key factor both controlling particle size and luminous efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.159.2-159
• /
• 2001

The new approach of homogeneous robust control systems synthesis, both linear, and nonlinear and non-stationary is offered. The control is carried out, providing the given phase constrains varied in acceptable limits, in view of constrains on its value and incompleteness of the information about functioning disturbances. The approach is based on introduction of auxiliary integral surfaces, on which the initial moving is projected. As a result the reduced equivalent moving is forming, described by the scalar equation which in many important cases can be integrated directly. On the basis of the obtained equation solving of a synthesis task is carried out and can be reduced to algebraic or integral inequalities. The final relations defined for linear equivalent moving are presented.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.5-11
• /
• 1996

While the enhanced biological phosphorus removal(EBPR), in anaerobic/aerobic condition, was known to remove phosphorus by means of metabolism of poly-P microorganisms, the phosphorus removed could be released in the form of ortho-P in the aerobic fixed biofilm reactor. This study was initiated to investigate the cause of ortho-P release in the aerobic fixed biofilm reactor. The resutls indicated that the phosphorus release was caused by autooxidation. The synthesis and release of phosphrous were related to the ORP and the boundary value for the phase change was about 170mV. In the synthesis phase, the phosphorus removal rate per COD removed was $0.023mgP_{syn}/mgCOD_{rem}$. The phosprous contents of the microorganism were 4.3 ~ 6.0% on a dry weight basis.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1436-1443
• /
• 1989

In this paper, we propose a maximum-likelihood estimation(MLE) method to obtain the location and the amplitude of the pulses in MPE( multi-pulse excitation)-LPC speech synthesis using multi-pulses as excitation source. This MLE method computes the value maximizing the likelihood function with respect to unknown parameters(amplitude and position of the pulses) for the observed data sequence. Thus in the case of overlapped pulses, the method is equivalent to Ozawa's crosscorrelation method, resulting in equal amount of computation and sound quality with the cross-correlation method. We show by computer simulation: the multi-pulses obtained by MLE method are(1) pseudo-periodic in pitch in the case of voicde sound, (2) the pulses are random for unvoiced sound, (3) the pulses change from random to periodic in the interval where the original speech signal changes from unvoiced to voiced. Short time power specta of original speech and syunthesized speech obtained by using multi-pulses as excitation source are quite similar to each other at the formants.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.406-409
• /
• 2001

The conductivity properties and synthesis of $LaNiO_{3}$ ceramics from $La_{1+\delta}NiO_{3}(\delta=-0.06,0,0.06)$ were investigated. A single perovskite phase was realized at $800^{\circ}C$. $La_{2}NiO_{4}$ and other unexpected oxide were observed at $1000^{\circ}C$. The Microstructure was showed clearly that it is a low density porous material. $LaNiO_3$ ceramic showed a metallic conductivity. The conductivity of La rich samples had a higher value than the La poor samples.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.498-498
• /
• 2000

A study on the robust control of a composite beam with a distributed PVDF sensor and piezo-ceramic actuator is presented in this paper. 1st and 2nd natural frequencies are considered in the modeling, because robust control theory which has robustness to structured uncertainty is adopted to suppress the vibration. If the controllers designed by H$_{\infty}$ theory do not satisfy control performance, it is improved by $\mu$-synthesis method with D-K iteration so that the $\mu$-controller based on the structured singular value satisfies the nominal performance and robust performance. Simulation and experiment were carried out with the designed controller and the verification of the robust control properties was presented by results.

• Macromolecular Research
• /
• v.8 no.6
• /
• pp.292-297
• /
• 2000

The theoretical synthesis of the isotactic and syndiotactic poly(methyl methacrylate) were carried out as a model for real polymerization reactions following the normal chain reaction processes by repeating the uniform localization of wave functions with inclusion of the interaction between the end group of the cluster and an attaching molecule by the elongation method, and then, the calculated value was compared with the usual PM$_3$ calculation. The results revealed that a reaction of cluster with monomer molecules has made it possible to calculate the electronic structure and total energy of polymer with nearly infinite length and a matrix of constant dimension. The isotactic poly(methyl methacrylate) is more stable than syndiotactic one. The same tendency have been found between the experimentally measured properties and a calculated total energy to explain the chain motion in isotatic and syndiotactic poly(methyl methacrylate).

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.1-4
• /
• 1998

SiC whisker reinforced Al2O3-SiC composite was fabricated by reaction synthesis method whish is cost ef-fective and allows good dispersion of whiskers. Fracture strength at room temperature showed the highest value with 150$0^{\circ}C$ reaction temperature because a lot of SiC whiskers was formed. Fracture strength at 135$0^{\circ}C$ did not show big differences with reaction temperature due to agglomeration of whiskers and formation of sil-icon oxynitride during hot MO(modulus of rupture) test probably promoting grain boundary sliding.