• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.256-257
• /
• 2005

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.203-206
• /
• 2002

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.911-919
• /
• 1994

As the study for preparation of single-layer anti-reflective coating on glass, the conditions of synthesis of sol for coating and of reproducible coating procedure were investigated. In case of water-based sol, coating was impossible because of poor wettability of sol. The Substitution of solvent with ethanol improved the wettability of sol on the glass surface, and optimum amount of ethanol for substitution was 70 vol%. Maximum specific surface area and total pore volume of water-based sol were 268.7$m^2$/g and 0.315 cc/g, but after substitution, those values increased to 404.1 $m^2$/g and 0.376 cc/g, respectively. The upper limit withdrawl speed of coating in order to get clean coated films without aggregations or stains was 7 cm/min. In case of addition of 0.1 mol HNO3 and substitution with 70 vol% ethanol and heat-treatment at 40$0^{\circ}C$ for 1 hour, thin film with thickness of 94 nm was obtained at withdrawl speed of 4 cm/min. The thickness of thin film was independent of drying time.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.197-202
• /
• 1990

Polyethylene glycol (PEG) grafted poly γ-benzyl L-glutamate (PBLG) were prepared from esterification or substitution reaction of PBLG with PEG having hydroxyl group at one end or primary amino groups at both ends. The viscosity of these polymer solution was decreased with decrease of polymer concentration. But in more dilute solution the viscosity was increased with decrease of polymer concentration. PEG-grafted PBLG polymers showed smaller water contact angles than PBLG homopolymer, and the water contact angles of the surface of PEG-grafted PBLG polymers were largely dropped by reacting with aminoethanol, resulting in hydrogel surfaces.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.575-582
• /
• 1989

The effects of raw material feeding procedures and gelation temperatures on zeolite synthesis are investigated. Thus, the synthesis of zeolite 4A from sodium aluminate and sodium silicate solutions is chosen as a model reaction, for which equi-molar hydrogelation is performed with variation of feeding procedures and gelation temperatures. The formation of crystal nuclei, often being referred to as precursors, is induced under different conditions, the variation being examined by means of viscosity and water contents. The final products of zeolite 4A are evaluated by XRD, SEM morphology, particle size analysis and cation exchange capacity. Evidence shows that the viscosity of the initial products and their water contents are markedly influenced by the feeding methods of the reactant materials and by the gelation temperature. Further, it is found that the gelation at an elevated temperatures near 7$0^{\circ}C$ can be made possible through modification of mixing procedures. This provides convenient means of controlling the particle size of the final products. In this regard, a continuous flow-type mixing technique is proposed, which is demonstrated to be superior to the conventional batch-type mixings. The significance of this finding may lie in savings of equipment as well as energy costs, especialy on a large scale commercialization of zeolite production.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.395-403
• /
• 2012

R&D of Nanofiber membrane has been carried out in the various fields, gas, water treatment, energy, and etc, with the continuous growth of membrane technology. There are several preparation methods for nanofiber, i.e. drawing, template synthesis, phase separation, self-assembly, and electrospinning. However, an electrospinning has many advantages such as high productivity, low production cost, easy to select law material, high relative surface area, and easy to functionalize. Nanofiber has been used in the field of membrane technologies such as secondary battery and water treatment fields. For the secondary battery separator, the separators having a high power and high thermal stability can be developed with spread of nanofiber on the commercial PP or PE/PP separators. High functional membranes can be also developed by adding the functional additives like antibacterial materials in the nanofiber membrane. It can be expected the high value added with nanofiber membrane because of its diverse applications from the water treatment to the energy field and because of its various functional advantages.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1252-1256
• /
• 2010

A polyvinylpyrrolidone (PVP)/Ag nanocomposites was prepared by the simultaneous thermal reduction and radical polymerization route. The in situ synthesis of the Ag/PVP nanocomposites is based on the finding that the silver n-propylcarbamate (Ag-PCB) complex can be directly dissolved in the NVP monomer, and decomposed by only heat treatment in the range of 110 to $130^{\circ}C$ to form silver metal. Silver nanoparticles with a narrow size distribution (5 - 40 nm) were obtained, which were well dispersed in the PVP matrix. A successful synthesis of Ag/PVP nanocomposites then proceeded upon heat treatment as low as $110^{\circ}C$. Moreover, important advantages of the in situ synthesis of Ag/PVP composites include that no additives (e.g. solvent, surface-active agent, or reductant of metallic ions) are used, and that the stable silver nanocolloid solution can be directly prepared in high concentration simply by dissolving the Ag/PVP nanocomposites in water or organic solvent.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.10.2-10.2
• /
• 2011

The design and synthesis of protein-like polymers is a fundamental challenge in materials science. A biomimetic approach is to explore the impact of monomer sequence on non-natural polymer structure and function. We present the aqueous self-assembly of two peptoid polymers into extremely thin two-dimensional (2D) crystalline sheets directed by periodic amphiphilicity, electrostatic recognition and aromatic interactions. Peptoids are sequence-specific, oligo-N-substituted glycine polymers designed to mimic the structure and functionality of proteins. Mixing a 1:1 ratio of two oppositely charged peptoid 36 mers of a specific sequence in aqueous solution results in the formation of giant, free-floating sheets with only 2.7 nm thickness. Direct visualization of aligned individual peptoid chains in the sheet structure was achieved using aberration-corrected transmission electron microscopy. Specific binding of a protein to ligand-functionalized sheets was also demonstrated. The synthetic flexibility and biocompatibility of peptoids provide a flexible and robust platform for integrating functionality into defined 2D nanostructures. In the later part of my talk, we describe the use of metal ions to construct two-dimensional hybrid films that have the ability to self-heal. Incubation of biomimetic peptoid polymers with specific divalent metal ions results in the spontaneous formation of uniform multilayers at the air-water interface. We anticipate that ease of synthesis and transfer of these two-dimensional materials may have many potential applications in catalysis, gas storage and sensing, optics, nanomaterial synthesis, and environmentally responsive scaffolds.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.108-109
• /
• 2013

Mitochondria play key roles in the production of cell's energy. Their dominant function is the synthesis of adenosine 5'-triphosphate (ATP) from adenosine diphosphate (ADP) and phosphate (Pi) through the oxidative phosphorylation. Evaluation of drug-induced mitochondrial toxicity has become increasingly important since mitochondrial dysfunction has recently been implicated in numerous diseases including cancer and diabetes mellitus. Mitochondrial functions have been monitored via oxygen consumption, mitochondrial membrane potential, and more importantly via ATP synthesis since ATP synthesis is the most essential function of mitochondria. Various analytical methods have been employed to investigate ATP synthesis in mitochondria, including high performance liquid chromatography (HPLC), bioluminescence technique, and pH measurement. However, most of these methods are based on destructive analysis or indirect monitoring through the enzymatic reaction. Infrared absorption spectroscopy (IRAS) is one of the useful techniques for real-time, label-free, and direct monitoring of biological reactions [1,2]. However, the strong water absorption requires very short path length in the order of several micrometers. Transmission measurements with thin path length are not suitable for mitochondrial assays because solution handlings necessary for evaluating mitochondrial toxicity, such as rapid mixing of drugs and oxygen supply, are difficult in such a narrow space. On the other hand, IRAS in the multiple internal reflection (MIR) geometry provides an ideal optical configuration to combine solution handling and aqueous-phase measurement. We have recently reportedon a real-time monitoring of drug-induced necrotic and apoptotic cell death using MIR-IRAS [3,4]. Clear discrimination between viable and damaged cells has been demonstrated, showing a promise as a label-free and real-time detection for cell-based assays. In the present study, we have applied our MIR-IRAS system to mitochondria-based assays by monitoring ATP synthesis in isolated mitochondria from rat livers. Mitochondrial ATP synthesis and hydrolysis were in situ monitored with MIR-IRAS, while dissolved oxygen level and solution pH were simultaneously monitored with O2 and pH electrodes, respectively. It is demonstrated that ATP synthesis and hydrolysis can be monitored by the IR spectral changes in phosphate groups in adenine nucleotides and MIR-IRAS is useful for evaluating time-dependent drug effects of mitochondrial toxicants.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.2 s.51
• /
• pp.153-159
• /
• 2005

In this study, we investigated the application of an extract from Ephedra sinica which has been composed of traditional Korean medicine as a whitening ingredient. The extract of Ephedra sinica which was obtained from the mixture of methanol and water (1:1) the inhibitory effect of tyrosinase. Then, Ephedra sinica was extracted by two different solvents. One was water and the other was methylene chloride. Only, the water extract of Ephedra sinica showed the inhibitory effort of tyrosinase; the anti-tyrosinase activity with $0.2\%$ of the water extract was $60.6\%$. But the extract of Ephedra sinica in methylene chloride fraction showed little inhibitory effect on tyrosinase. The inhibitory effect of the concentrated water extract of Ephedra sinica was tested on L-DOPA auto-oxidation and melanin synthesis in B-16 melanoma. In L-DOPA auto-oxidation, $0.5\%$ of the concentrated water extract showed $87\%$ of inhibition of L-DOPA auto-oxidation and the $0.75\%$ concentrated Ephedra sinica extract in wafer fraction inhibited $98.8\%$ of that. In melanin synthesis of B-16 melanoma, the concentrated water effect of Ephedra sinica inhibited $70.2\%$ or $79.9\%$ of inhibitory effect on that at the concentration of $0.05\%$ or $0.075\%$, respectively. For verifying the skin whitening effect of the concentrated water extract of Ephedra sinica in vivo, we performed the clinical test of that. The research showed the significant skin whitening effect of a cream containing $0.5\%$ Ephedra sinica extract and the statistical analysis showed a significant difference (p < 0.05) between sample (containing $0.5\%$ Ephedra sinica extract) and placebo after 10 weeks.