• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.11
• /
• pp.379-386
• /
• 1983

In this paper,the more accurate and simple synchronous machine model is derived by parameter modification method. At first, the flux linkage state space model is composed by redefining the parameters of synchronous machine and considering the saturation effect approximately. After that, this modified model is apply to the power system model and the effects of power system stability is analyzed by this model's characteristics in fault condition. As the result, the modified synchronous machine model shows more accurate and simple than the privious one.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.260-267
• /
• 2013

In this paper a general 2-D model of a large air-gap synchronous machine either with non-magnetic or magnetic core rotor is investigated and electrical characteristics of the machine are analytically calculated. Considering the general model, analytical equations for magnetic field density in different regions of the large air-gap machine are calculated. In addition, self and mutual inductances in the proposed model of the machine have been developed, which are the most important parameters in the electromagnetic design and transient analysis of synchronous machines. Finite element simulation has also been performed to verify the obtained results from the equations. Analytical results show good agreement with FEM results.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.812-819
• /
• 2015

This paper presents a new approach for simulating the internal faults of synchronous machines using distributed computing and Large Change Sensitivity (LCS) analysis. LCS analysis caters for a parallel solution of 3-phase model of a faulted machine within the symmetrical component-based model of interconnected network. The proposed method considers dynamic behavior of the faulty machine and connected system and tries to accurately solve the synchronous machine’s internal fault conditions in the system. The proposed method is implemented in stand-alone FORTRAN-based phasor software and the results have been compared with available recordings from real networks and precisely simulated faults by use of the ATP/EMTP as a time domain software package. An encouraging correlation between the simulation results using proposed method, ATP simulation and measurements was observed and reported. The simplified approach also enables engineers to quickly investigate their particular cases with a reasonable precision.

• Journal of Power Electronics
• /
• v.2 no.2
• /
• pp.95-103
• /
• 2002

The paper deals with the control of the synchronous reluctance machine without position senser. A method for the computation of the transformation angle out of terminal voltages and currents is presented. The injection of test signals allows operation at zero speed. Fundamental for this control scheme is the angle estimation method over the whole operating range including field-weakening is discussed in detail. The implementation of the angle estimation method in a rotor-oriented control scheme and practical results are demonstrated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1642-1651
• /
• 2008

The dynamic behavior of power systems is affected by the interactions between linear and nonlinear components. To analyze those complicated power systems, the linear approaches have been widely used so far. Especially, a synchronous generator has been designed by using linear models and traditional techniques. However, due to its wide operating range, complex dynamics, transient performances, and its nonlinearities, it cannot be accurately modeled as linear methods based on small-signal analysis. This paper describes an application of the Takaki-Sugeno (T-S) fuzzy method to model the synchronous generator in a single-machine infinite bus (SMIB) system. The T-S fuzzy model can provide a highly nonlinear functional relation with a comparatively small number of fuzzy rules. The simulation results show that the proposed T-S fuzzy modeling captures all dynamic characteristics for the synchronous generator, which are exactly same as those by the conventional modeling method.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1360-1361
• /
• 2011

본 논문은 Synchronous Machine을 기반으로 하여 250[kVA]의 용량을 가지는 플라이휠을 모델링하고 그 예를 수학적으로 해석함으로써 분산전원으로서의 신재생에너지와 연계하여 에너지를 저장/출력할 수 있는 타당성을 검토할 수 있도록 한다.

• Proceedings of the KIEE Conference
• /
• 1983.07a
• /
• pp.154-155
• /
• 1983

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.594-596
• /
• 1995

This paper represents an accurate evaluation method in the eigenvalue analysis of the synchronous machine which has the characteristics of seperated saturation and cross-magnetized one. The cross-magnetizing effect is included in the reactance and state matrix of the machine. And the machine with excitation system is simulated in the cases of those two saturations. The simulation results show the existence of the differences between the seperated saturation and the cross-magnetized one in the analysis of power system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.98-104
• /
• 2013

AC machines are in wide use in industry and d-q transformation from 3 phase of a, b, c is commonly used to analyze these kinds of machines. The equivalent circuits of d and q axis are, however, generally cross coupled and difficult to analyze. In this study, a modeling technique of AC machine including induction and PM synchronous motors using matrix vector is proposed. With that model, it can not only explain the AC machines physically but also make it simple to analyze them. The separating process of d and q components is not needed in this model and this model can be applied to analyze asymmetric motors like IPMSM machine. With this technique, the model becomes simple, easy to understand physically, and yields results that are the same as those from other models. These simulation results of the proposed model for induction motor are compared with those of other models to verify the method proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1461-1471
• /
• 2002

Linear motor has a lot of advantages in comparison with conventional feed mechanisms: high velocity, high acceleration, good positioning accuracy and a long lifetime. An important disadvantage of linear motor is its high power loss and heating up of motor and neighboring machine components in operation. For the application of the linear motors to precision machine tools an effective cooling method and thermal optimizing measures are required. In this paper Finite-Element-Method for the thermal behavior of synchronous linear motor is introduced, which is useful for the design and manufacturing of linear motors. By modeling the linear motor the orthotropic physical properties of the sheet metal and windings were considered and convective coefficient in the water cooler and to the surroundings was defined by analytical and experimental method. The calculated isothermal lines could analyze the heat flow in the linear motor.