• The Magazine of the IEIE
• /
• v.31 no.3
• /
• pp.49-56
• /
• 2004

지금까지 end-to-end ethernet 서비스를 실현하기 위한 노력으로 10 Gbps 이상의 ethernet 전송기술, 강력한 보안프로토콜, 그리고 QoS 방안 등이 주가 되어 연구되고 논의되어져 왔다. 본 고에서는 기존의 asynchronous ethernet을 그대로 수용하며 기존 ethernet의 가장 큰 한계점으로 지적되었던 real-time data전송문제를 해결하기 위한 ‘Synchronous Ethernet’ 의 표준화 현황 및 기술을 소개하고자 한다. ‘Synchronous Ethernet’은 현재 공식적으로 정해진 표준이 없는 상태지만 2004년에 국제표준회의에서 새롭고 활발한 활동으로 자리잡을 것으로 보인다.(중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.217-226
• /
• 2007

By growth of digital media devices, a number of researches are in progress for transmission of isochronous traffic over network. Above all, network techniques that apply Ethernet, are in the limelight because of advantages of Ethernet. A standardization of network technique for isochronous traffic over Ethernet is in progress in IEEE 802.1 AVB TG. This paper proposed network technique for isochronous traffic over Ethernet model, that is, synchronous Ethernet model with synchronization method between devices. And this paper proposed bandwidth reservation method for transmission of isochronous traffic in synchronized devices. In this paper, synchronous Ethernet model is implemented through OPNET, efficiency of proposed methods is analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.461-463
• /
• 2018

In this paper, we have studied the devices needed for long distance wireless transmission of SDH network. This devices propose wireless transmission and measurement method of STM-1(basic transmission unit of SDH method) signal and 200Mbps synchronous ethernet. The synchronous clock recovery function is provided for STM-N transmission and synchronous ethernet transmission, and spare clock switching function is designed for stable synchronization. In addition, we discussed the measurement method of STM-N and synchronous Etherent communication method in wireless transmission section.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12B
• /
• pp.838-846
• /
• 2005

In this paper, we consider the following two issues for implementing the synchronous Ethernet systems. First, a synchronous Ethernet system employs a fixed size superframe which is divided into a synchronous period and an asynchronous one. We note that the starting point of a superframe is not deterministic when an ordinary data frame's transmission is overlapped the superframe boundary. This overlap may be a fatal drawback for strict jitter bounded applications. Circumventing the problem, we propose a frame fragmentation scheme to provide a zero jitter, and compare its delay performance with the hold scheme which also provides the zero jitter. We next concern that IEEE 802.3x pause frames cannot be promptly transmitted in a synchronous period, and thus asynchronous traffics may be dramatically get dropped at the input buffer of a switch. To handle the problem, we propose an efficient flow control by allowing the transmission of the pause frame in a synchronous period, and investigate the blocking probability of the asynchronous traffics by the simulation.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.421-429
• /
• 2006

In this paper, we suggest a new capability aware spanning tree(CAST) algorithm for Ethernet bridged network which consists of both legacy Ethernet bridges and synchronous Ethernet ones. The legacy spanning tree algorithm specified in IEEE 802.1D standard select root bridge and construct tree based on each bridge's identifier without consideration of each bridge's capability. Thus we note that if the legacy STP may assign a synchronous bridge as a root bridge, the bridge may become a bottleneck for asynchronous trafficbecause of bandwidth limitation for asynchronous traffic. In this paper, the CAST algorithm constructsmultiple spanning tree by using of bridge capability and makes different transmission path for each traffics, can removes this kind of defect. From the simulation results, we can see that the proposed CAST algorithm has better end-to-end delay performance than legacy spanning tree algorithm in high traffic load and multiple hops environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.780-783
• /
• 2009

The application of MOST150 technology has been required to satisfy the demand for the automotive infotainment system and the higher bandwidth requirements caused by the increase of the multimedia processing capacity. The Ethernet technology applied gateway was implemented for an efficient transmission of multimedia, a vehicle diagnosis, an external communication, a data processing between the MOST150 and the CAN communication method applied to many existing vehicles. The new algorithm and application were suggested in order to efficiently perform the data processing between other types of communication systems. The existing MOST150 frame is mainly composed of the Control Channel, the Legacy Packet Channel(async) and the Synchronous /Isochronous Channels and performs the data processing through these sequential channels. With the sense of this process, this study suggested the new algorithm that the Mapping method of the IETF's QoS Management was applied to the MOST150 technology for the efficient QoS.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.237-241
• /
• 2008

Femtocells are cellular access points that connect to a mobile operator's network using residential DSL or cable broadband connections. They have been developed to work with a range of different cellular standards including CDMA, GSM and UMTS. Like legacy base station, the frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. So, some techniques are discussed to alternate with the legacy GPS system. NTP, PTP, Synchronous Ethernet use the ethernet to synchronize distributed clocks in packet networks. AGPS support reliable position information than the legacy GPS in poor signal conditions. But, These method also have some problems. So, hybrid timing method like A-GPS+PTP and TV+GPS was developed to make up the weak point of GPS. This paper introduces the each method and compare each other and y propose much better solution for timing synchronization at the Femtocell

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1233-1240
• /
• 2004

Recently the need for cooperative control among robots is increasing in a variety of industrial robot applications. Such a control framework enhances the efficiency of the real robotic assembly environment along with extending the robot application. In this paper, an ethernet-based cooperative control framework was proposed. The cooperative control of robots can multiply the handling capacity of robot system, and make it possible to implement jigless cooperation, due to realization of trajectory-synchronized movement between a master robot and slave robots. Coordinate transformation was used to relate among robots in a common coordinate. An optimized ethernet protocol of HiNet was developed to maximize the speed of communication and to minimize the error of synchronous movement. The proposed algorithm and optimization of network protocol was tested in several class of robots.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.199-209
• /
• 2012

In transport networks, a multi-ring architecture is very useful to facilitate network planning and to design and provide more resilient services for customers. Unlike traditional synchronous optical network multi-rings, the service resiliency of Ethernet-based multi-rings is significantly impacted by the ring hierarchy because a link or node failure in a certain level ring triggers filtering database flush actions in all higher level rings as well as in the ring with the failure, and consequently a large amount of duplicated data frames may be flooded. In this paper, we investigate how the ring hierarchy impacts the service resiliency of multi-ring networks. Based on extensive experiments on various single- and multiple-link failures, we suggest two effective inter-ring connection rules to minimize the transient traffic and to ensure more resilient multi-ring networks. In addition, we consider a flush optimization technique called e-ADV, and show that the combination of e-ADV and multi-ring structures satisfying our inter-ring connection rules results in a more attractive survivability performance.