• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.213-220
• /
• 2008

In a distributed processing environment composed of many independent systems connected by networks, it is very important and difficult to make time synchronization between the systems. Especially in the USN environment the time synchronization is still more difficult than in general distributed processing environment because energy is limited and communication function is feeble. Even though of these difficulties, the USN environment requires higher precision of time synchronization. We of the typical applications requesting very strict time synchronization in USN is TDMA MAC. This paper proposes and evaluates a new time synchronization protocol HTSP(Hierarchical Time Synchronization Protocol) which is an advanced version of the FTSP(Flooding Time Synchronization Protocol) published recently. The time synchronization precision of the HTSP is equal to that of the FTSP, but the energy consumption of the HTSP is lower than that of the FTSP owing to the reduced number of broadcast messages. The simulation results show that the energy consumption of the HTSP is only 74% of that of the FTSP.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.23-28
• /
• 2015

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol for WSN(wireless sensor networks), was developed to provide higher synchronization accuracy and energy efficiency. So, TPSN's approach has been referenced by so many other WSN synchronization schemes till now. However, TPSN has a collision problem due to simultaneous transmission among competing nodes, which causes more network convergence delay for a network-wide synchronization. A Polling-based scheme for TPSN is proposed in this paper. The proposed scheme not only shortens network-wide synchronization time of TPSN, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.

• Journal of Korea Multimedia Society
• /
• v.19 no.10
• /
• pp.1808-1815
• /
• 2016

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol, has been already developed to provide time synchronization among nodes in wireless sensor networks. Even though the TPSN's method has been referenced by so many other time synchronization schemes for resource-constrained networks like wireless sensor networks or low power personal area networks, it has some inefficiency in terms of power consumption and network-wide synchronization time (or called convergence time). The main reason is that each node in TPSN needs waiting delay to solve the collision problem due to simultaneous transmission among competing nodes, which causes more power consumption and longer network convergence time for a network-wide synchronization. In this paper an improved scheme is proposed by changing message exchange method among nodes. The proposed scheme not only shortens network-wide synchronization time, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.31-43
• /
• 1996

In this paper, we analyze the delay characteristics of the multimdedia traffic in B-ISDN, and propose a weighted variable-size window estimator considering the QoS characteristics of the media and the variable delay characteristics of the networks, and present a delay estimator-based synchronization protocol for the efficient synchronization in ATM-based B-ISDN. The proposed estimator assigns a high weight value to recent cells arrived in the receiver, and suitably adjusts window size in order to efficiently adapt to delay variation by the prameter to detect the delay variation of the networks. The proposed synchronization protocol estimates end-to-end delay by the weighted variable-size window estimator, and dynamically schedules th evirtual channel of the transmitter to playout multimedia data on time in the receiver. Also, we evaluate the performance of the delay estimator, which is the most importnat functional element in our proposed synchronization protocol, by the simulation and analyze the results of the simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1689-1706
• /
• 2012

The preservation of temporal dependencies among a group of processes that exchange continuous media at runtime is a key issue for emerging mobile distributed systems (MDS), such as monitoring of biosignals and interactive multiuser games. Although several works are oriented to satisfy temporal dependencies, most of them are not suitable for MDSs. In general, an MDS is characterized by the absence of global references (e.g. shared memory and wall clock), host mobility, limited processing and storage capabilities in mobile hosts, and limited bandwidth on wireless communication channels. This paper proposes an asymmetric synchronization protocol to be used at runtime in an MDS without using a common reference. One main aspect of our synchronization protocol is that it translates temporal constraints to causal dependencies of the continuous media data as seen by the mobile hosts. We simulate the protocol by considering a cellular network environment and by using MPEG-4 encoders. The simulation results show that our protocol is effective in reducing the synchronization error. In addition, the protocol is efficient in terms of processing and storage costs at the mobile devices, as well as in the overhead attached per message across the wired and wireless channels.

• The KIPS Transactions:PartA
• /
• v.19A no.4
• /
• pp.181-186
• /
• 2012

The distributed measurement and control system require technology to solve complex synchronization problem among distributed devices. It can be solved by using IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems to synchronize real-time clocks incorporated within each component of the system. In this paper, we implemented the IEEE 1588v2 PTP emulator on BlueScope BL6000A using a delay request-response mechanism to measure clock synchronization.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• ETRI Journal
• /
• v.30 no.3
• /
• pp.441-450
• /
• 2008

The scalable extension of H.264, known as scalable video coding (SVC) has been the main focus of the Joint Video Team's work and was finalized at the end of 2007. Synchronization between media is an important aspect in the design of a scalable video streaming system. This paper proposes an efficient media synchronization mechanism for SVC video transport over IP networks. To support synchronization between video and audio bitstreams transported over IP networks, a real-time transport protocol/RTP control protocol (RTP/RTCP) suite is usually employed. To provide an efficient mechanism for media synchronization between SVC video and audio, we suggest an efficient RTP packetization mode for inter-layer synchronization within SVC video and propose a computationally efficient RTCP packet processing method for inter-media synchronization. By adopting the computationally simple RTCP packet processing, we do not need to process every RTCP sender report packet for inter-media synchronization. We demonstrate the effectiveness of the proposed mechanism by comparing its performance with that of the conventional method.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.300-313
• /
• 2014

Various Time Synchronization protocols for a Wireless Sensor Network (WSN) have been developed since time synchronization is important in many time-critical WSN applications. Aside from synchronization accuracy, energy constraint should also be considered seriously for time synchronization protocols in WSNs, which typically have limited power environments. This paper performs analysis of prominent WSN time synchronization protocols in terms of power consumption and test by simulation. In the analysis and simulation tests, each protocol shows different performance in terms of power consumption. This result is helpful in choosing or developing an appropriate time synchronization protocol that meets the requirements of synchronization accuracy and power consumption (or network lifetime) for a specific WSN application.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.4
• /
• pp.293-300
• /
• 2009

In this paper, we describe a method for synchronization protocol method used in control system based on network and IEEE 1599 synchronization method which used for implementation of synchronization technology of advanced industrial Ethernet. We also implement and perform the experiment for synchronization technology of EtherCAT communication which is one of the industrial Ethernet technology used IEEE 1599 synchronization technology based on time. And we describe an evaluation for experiment result, improve the problem and future plan.