• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.14-22
• /
• 1998

The Mathematic model of bit synchronization charge-pump Phase Locked Loop (PLL) is presented which takes into account the aperiodic reference pulses and the leakage current of the loop filter. We derive theoreitcal static phase error, overload and stability of bit synchronization charge-pump PLL using presented model and compare it with one of the conventional charge-pump PLL model. We can analysis bit synchronization charge-pump PLL exactly because our model takes into account the leakage current of the loop filter and aperiodic input data which are the charateristics of bit synchronization charge-pump PLL. We also verify it using HSPICE simulation with a bity synchronizer circuit.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.3
• /
• pp.235-241
• /
• 2020

In this paper, we propose the bus/bypass synchronization phase lock loop (B-Sync PLL) method using each phase voltage controller of a parallel UPS inverter. The B-Sync PLL included in each phase voltage control system of parallel UPS inverters has the transient response and the phase synchronization error at grid normal or blackout. The validity of this method is verified by simulation and experiment. As a result, the parallel UPS inverters using the proposed method confirmed that the output phase was continuously synchronized when a grid blackout, improving the transient response characteristics for stable load power supply and equal load sharing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1312-1317
• /
• 2013

Pseudolite is a contraction of the term "pseudo-satellite", used to refer to something that is not a satellite which performs a function commonly in the domain of satellites. Pseudolite are most often small transceivers that are used to create a local, ground-based GPS alternative. Pseudo-range measurement of pseudolite has around 300m range error, when time synchronization error of $1{\mu}sec$ occurs. Therefore the time synchronization methods play an important part in navigation augmentation using pseudolite. This paper proposes three clock synchronization methods that are installation method of pseudolite station, method using KRISS-UTC and method using PRN code phase difference for pseudolite. The simulation platform structure is presented for evaluating proposed clock synchronization performance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.13-21
• /
• 2005

This paper presents a fuzzy model-based approach for synchronization of time-delay chaotic system with input saturation. Time-delay chaotic drive and response system is respectively represented by Takagi-Sugeno (T-S) fuzzy model. Specially, the response system contains input saturation. Using the unidirectional linear error feedback and the parallel distributed compensation (PDC) scheme, we design fuzzy chaotic synchronization system and analyze local stability for synchronization error dynamics. Since time-delay in the transmission channel always exists, we also take it into consideration. The sufficient condition for the local stability of the fuzzy synchronization system with input saturation and time-delay is derived by applying Lyapunov-Krasovskii theory and solving linear matrix inequalities (LMI's) problem. A numerical example is given to demonstrate the validity of the proposed approach.

• Asia-Pacific Journal of Business
• /
• v.13 no.3
• /
• pp.183-208
• /
• 2022

Purpose - The main purpose of this study is to widely investigate the impact of recent pandemic crises on the synchronization of the world capital markets through 25 stock indices from major developed countries. Design/methodology/approach - This study collects 25 stock indices from major developed countries and the time period is between January 5, 2001 and February 24, 2022. The data sets used in the study include finance.yahoo.com and Investing.com.. The Granger causality analysis, unit-root test, VAR analysis, and forecasting error variance decomposition were hired in order to analyze the data. Findings - First, there are significant inter-relations among 25 countries around recent major pandemic crises(such as SARS, A(H1N1), MERS, and COVID19), which is consistent result with previous literature. Second, COVID19 shows much stronger impact on the world-wide synchronization than other pandemics. Third, the return volatility of each stock market varies, unit root tests show that daily stock index data are unstable while daily stock index returns are stable, and VAR(Vector Auto Regression) analyses presents significant inter-relations among 25 capital markets. Fourth, from the impulse response function analyses, we find that each market affects the other markets for short term periods, about 2~4 days, and no long term effect was not found. Fifth, Granger causality tests show one-side or two-sides synchronization between capital markets and we estimate, through forecasting error variance decomposition method, that the explanatory portions of each capital market on other markets vary from 10 to 80%. Research implications or Originality - The above results all together show that pandemic crises have strong effects on the synchronization of world capital markets and imply that these synchronizations should be carefully considered both in the investment decisions by individual investors and in the financial and economic policies by governments.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.159-165
• /
• 2022

In this paper, a frame synchronization structure for the Binary Phase Shift Keying (BPSK) modulation method in underwater acoustic communication was proposed. The proposed frame synchronization structure is largely divided into two. First, the approximate position and frequency offset of the frame are obtained by non-coherent correlation and sliding Fast Fourier Transform (FFT) method. Second, after compensating for the frequency error to the received signal, the exact position of the frame is obtained by coherent correlation method. Maritime experiments were conducted to confirm the performance of the 2-STEP frame synchronization structure. It was showed that the limitations of the non-coherent correlation and sliding FFT method can be verified when the power of the received signal was greatly reduced due to the channel characteristics. As a result, stable frame synchronization could be obtained by compensating for the frequency error and then using the coherent correlation method.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2013

Presently, there are many different technologies used for position detection. However, as signal-receiving devices operating in different locations must detect the precise position of objects located at long distances, it is essential to know the precise time at which an object's or a user's terminal device sends a signal. For this purpose, the existing time of arrival (ToA) technology is not sufficiently reliable, and the existing time difference of arrival (TDoA) technology is more suitable. If a TDoA-based electric surveillance system and other tracking devices fail to achieve precise time-synchronization between devices with separation distance operation, it is impossible to obtain correct TDoA values from the signals sent by the signal-receiving devices; this failure to obtain the correct values directly affects the location estimation error. For this reason, the technology for achieving precise time synchronization between signal-receiving devices in separation distance operation, among the technologies previously mentioned, is a core technology for detecting TDoA-based locations. In this paper, the accuracy of the proposed time synchronization and the measurement error in the TDoA-based location detection technology is evaluated. The TDoA-based location measurement error is significantly improved when using the proposed method for time-synchronization error reduction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.1003-1010
• /
• 2008

In this paper, we propose the new method to decrease the navigation error by measurement time synchronization error in RLG Trapping signal processing. There are two methods to eliminate the dither motion in RLG. One is the stripping signal processing method. Another is the trapping signal processing method. This two methods have various error sources in measurement output. We perform the error modelling and analysis for the measurement time synchronization error between angular rate from RLG and acceleration from accelerometer in the trapping signal processing method. And we verify the navigation performance through simulation and experiment. Results of simulation and experiment show that the proposed method is very effective in decreasing the navigation error.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.640-648
• /
• 2018

Time division wireless communication in tactical MANET is attractive to deliver both high data rates and long-range coverage, and to provide scheduled QoS to mission participants. This paper is about the time synchronization issue of multi-mission USV in tactical MANET. As USV communication coverage becomes longer, the synchronization error also becomes higher; therefore, which results in link disconnection, and consequent failures of reconnection because base station cannot configure necessary parameters over long-distant terminal. We propose a range adaptive time synchronization method to compensate for synchronization errors. The issue of long-range time synchronization problem was identified during maritime communication tests, and we verified the proposed method through analyses of both indoor and outdoor test results.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1722-1723
• /
• 2007

This paper describes a simple method to reduce rotation angle error of mobile robot using omni-wheel[3](omni-bot). This method can be applied to not only omni-bot, but also other robot with a large number of servo motor. Robot using many servo motor as omni-bot is complicated for hardware and software, each servo motor has difficulty in synchronizing. Three servo motor, three omni-wheel and three serial servo motor controller is used, PC or Micro Processor interface with the serial servo controller through "SSC100" protocol. In order to check the improvement of the proposed serial servo synchronization compared to existing sequential communication method. comparing object is rotation angle error of omni-bot. The results of this make building of omni-bot system easy and decrease rotation angle error.