• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.44-53
• /
• 2007

In this paper, we focus on the developments of complex location awareness algorithms for real-time location based service and precise/stable localization in the outdoor. In the case of using galileo satellite system along with GPS, several error factor such as the ionosphere can be reduced for an increment of used frequency and visible satellites. Therefore, localization estimation error is no longer having problems with location awareness. But, chips synchronization error induces the error of acquisition and tracking, and the performance of receiver can be decreased. In order to solve this problem, this paper proposes a correlator for performance improvement of receiver in the precise localization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.773-781
• /
• 2000

The average bit error rate of wideband CDMA in forward link is evaluated for frequency and timing errors in multipath Rayleigh fading channel. The channel BER is evaluated analytically and information BER is investigated with simulation. The performance degradation due to the code/frequency synchronization errors was obtained through simulation for particular two coding schemes - convolutional codes and turbo codes. The results show 1dB degradation due to Tc/4 timing error and 0.5dB degradation due to 50Hz frequency error, for both coding schemes.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.27-35
• /
• 1993

In this paper, a new algorithm for high level security and quality of speech is proposed. The algorithm is based on the rearrangement of the fast fourier transform (FFT) coefficients with pre and post filter process, hamming window and adaptive pseudo spectrum insertion. Then, the pre and post filters are used for the whitening of speech spectrum and the adaptive pseudo spectrum is inserted for the unclassification of silence/speech. Also, the hamming window technique is applied for the robustness to the syncronization error in the telephone line. According to the simulation results, it can be seen that the security of scrambled signal and the quality of descrambled signal have been improved fairly in both subjective and objective performance test and the new FFT scrambler is robust to the synchronization error.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1135-1142
• /
• 2002

In this study, a methodology of synchronous control which can be applied to position synchronization of a multi-axes driving system has been developed. The synchronous error is caused by model uncertainties and disturbance at each axis. To overcome these problems, the synchronous control system of each axis has been composed of reference model, speed and synchronous controllers. The speed control system has been designed to follow speed reference. And the synchronous controller has been designed to keep minimizing the position synchronous error by reference model and H$\sub$ / approach. By the proposed method, position synchronous control system can be easily extended to two or more axes driving system. The effectiveness of the proposed method has been demonstrated by experiment.

• Journal of Information Processing Systems
• /
• v.10 no.3
• /
• pp.429-442
• /
• 2014

In this paper, we investigated the use of seasonal autoregressive integrated moving average (SARIMA) time series models for fault detection in semiconductor etch equipment data. The derivative dynamic time warping algorithm was employed for the synchronization of data. The models were generated using a set of data from healthy runs, and the established models were compared with the experimental runs to find the faulty runs. It has been shown that the SARIMA modeling for this data can detect faults in the etch tool data from the semiconductor industry with an accuracy of 80% and 90% using the parameter-wise error computation and the step-wise error computation, respectively. We found that SARIMA is useful to detect incipient faults in semiconductor fabrication.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.242-249
• /
• 2001

In this study, a methodology of synchronous control has been developed that can is applied to position synchronization of a two-axes driving system such as overhead crane. The synchronous error is caused by model uncertainties and torque load at each axis. To overcome these problems, the synchronous control system has been composed of two disturbance observers to calculate the torque disturbance and one synchronous controller to eliminate synchronous error. By considering model uncertainties of each axis, the synchronous controller has been designed using H(sub)$\infty$ control theory. The effectiveness of the proposed method has been verified through simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.90-95
• /
• 2010

This paper describes the development of integrated head and eye tracker system. Vision based head tracker is performed and it has 7mm error in 300mm translation. The epi-polar method and point matching are used for determining a position of head and rotational degree. High brightness LEDs are installed on helmet and the installed pattern is very important to match the points of stereo system. Eye tracker also uses LED for constant illumination. A Position of gazed object(3m distance) is determined by pupil tracking and eye tracker has 1~5 pixel error. Integration of result data of each tracking system is important. RS-232C communication is applied to integrated system and triggering signal is used for synchronization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.232-239
• /
• 2006

In this paper, we analyze the preamble model for Wireless PAN(WPAN) in proposed Ultra WideBand(UWB) Multi-Band OFDM(MB-OFDM) system of IEEE 802.15.3a standard. Besides, we propose effective Carrier Frequency Offset and Symbol Timing Offset Estimation algorithm which offers enhanced performance, and analyze its performance using Detection Probability, False Alarm Probability, Missing Probability, Mean Acquisition Time and MSE(Mean Square Error) through simulation in AWGN and UWB channel environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2488-2497
• /
• 1997

In this paper, a computer simulation of the Lornz discrete chaotic system is described. The chotic behavior closely matches the results predicted by numerical simulations. Using the concept of discrete synchronized chaotic systems, the possibility of a secure communication is proved by simulating the Lorenz system in both the transmitter and receiver. In the proposed approach, at first, a chaotic modulating signal is multiplied with the message, and these are transmitted with adding a chaotic modulating signals, and then at the receiver, the chaotic modulating signal is regenerated and divided from the receiver signal. Varying a smapling time interval to calibrate the robustness of the Lorenz discrete synchronized chaotic system as a nonlinear state estimator, we measured the performance of the Lorenz discrete syncrhonized chaotic system by comparing the synchronization error and the error between transmitted signal and received signal.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.107-109
• /
• 2006

The additional matters appear to be considered in several aspects for building up power-quality measuring system of transmission system(high voltage system) compared to distribution system(middle or low voltage system). Like in distribution system, input signals are also received from PT and CT source of voltage and current respectively in transmission system and applied in accordance with a certain rate. In this case, very big error rate can be occurred according to the specification of the measuring system as the applying rate is bigger than in distribution system beyond comparison. In addition, when the abnormal signal occurred such as sag/swell, interruption, transient etc., power quality of other sites linked to the system also should be checked to find the accurate cause of the abnormal power-quality signals from the corresponding site. Accordingly, the accurate diagnosis on the condition of Power quality for the system depends on the way how the synchronization system is brought along for each site. This paper will suggest the solution for the most effective system building focused on how to solve the problem of the error rate and synchronization described in the above when building up the measuring system of power quality for transmission system.