• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.27-32
• /
• 2008

Impulse Radio Ultra Wide Band (IR-UWB) system can be used to wireless position location system because of its unique very short pulse in the order of nanosecond. A few algorithms have been proposed to calculate location of sensors or tags. In this paper, we compare these algorithms and propose 'TDoA with wireless synchronization' as practical solution. Earlier algorithms need special logic to fix the duration to receive and send pulse or assume synchronization with wire. In proposed method, beacons synchronize each other using impulse and nodes can be made simple and cheap. We evaluated the performance and it shows 50% improved accuracy at the error range of 50cm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.202-213
• /
• 2004

In this paper, we propose a preamble structure and synchronization/channel estimation methods for OFDM-based multiple antenna WLAN systems that have 200Mbps transmit rate. With the proposed preamble structure, multiple antenna WLAN systems are backward-compatible with IEEE 802.11a systems which use the same 5㎓ band and synchronization performance is better than that of single antenna OFDM systems. For channel estimation, the preamble overhead is small and performance degradation by timing synchronization error that causes the critical problem of conventional comb-type multiple antenna channel estimation method also can be minimized by frequency domain phase recovery. Synchronizer and channel estimator for proposed preamble structure are implemented and verified using Verilog HDL. For the system with 4 transmit antennas and 4 receive antennas, about 150K gates are needed for synchronizer and 12K gates for channel estimator.

• Journal of The Korean Association of Information Education
• /
• v.19 no.4
• /
• pp.441-448
• /
• 2015

This paper describes about a software implementation for class analysis and quantization based on our video synchronization method. We proposed a new indexing method, synchronization strategies, and data structure for our analyzer implementation. We implemented a class video analyzer using intelligent multimedia technologies which can play class video selectively. Our proposed method analyzes class videos depending on the time schedule composed of introduction, development and summary stages. We apply our analysis filters to the class videos in the predefined regular intervals. We experimented on the synchronization performance of our proposed method and software. In the experimental, we could demonstrate the effectiveness and practicality of our class analyzing method within the margin of error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.139-147
• /
• 2008

DVB-S2 (Digital Video Broadcasting-Satellite, Version 2) system transmits frames which adapt their structures based on the channel conditions, thus requiring simultaneous detection of the start of the Same (SoF) and the frame structure at the initial acquisition stage of the receiver. Also, a very low value of the minimum operating signal-to-noise ratio (SNR) for the acquisition necessitates a method utilizing multiple received frames to meet the required performance. In this paper, performance of joint time synchronization and frame structure detection methods using multiple DVB-S2 frames is evaluated by deriving the detection error probability. In particular, we evaluate the performance and complexity variations when the soft- and hard-decision values of the signal correlation output are used, present the synchronization parameters to optimize the performance, and verify the analysis results via computer simulations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.309-316
• /
• 2011

A PLL system has widely used for synchronizing the grid voltage at the grid-connected inverter for supplying power from the PV generation systems. In this paper, a PLL algorithm without both the loop filter and PI controller is suggested for improving the performance of synchronization at the single-phase and three-phase grid connected inverters. In order that the output voltage of a phase detector in the PLL has only a dc voltage, and it approaches to 0 when the synchronization signal is locked to the grid voltage, the feedback signals are determined by using two-phase voltages. After the PLL system with a proportional controller is modelled with the small signal analysis, the stability and steady-state error are investigated. Through the simulation studies and experimental results, the performances of the proposed PLL algorithm are verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.497-500
• /
• 2010

Wireless sensor network is the system for data collection and data process between many nodes. For this work, Synchronization of operation execution and ordering many events are needed. Reference the external time information is the most accurate way to have same time information for all nodes but it's hard to apply these to sensor network. So there are many study of time synchronization there are many error occurred when the time synchronization is executed in the sensor network and minimizing these errors is important. In this paper, we propose how to minimize errors using several time stamp information exchanging when the network is initialized. When the big difference is occurred between receive time and send time in the node communication(cause of traffic overhead and etc), it shows big error of time correction and transfer delay time. but it's hard to detect these errors when it exchanges time stamp information just one time. so we try to reduce these errors using the median value of transfer delay and time correction value with many times of time stamp information exchange.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.882-890
• /
• 2009

In this paper, we describe a compensation method that can be used for the situation where Loran receivers lose their phase lock to the received Loran signals when Loran signals are employed for the synchronization of national infrastructures such as telecommunication networks, electric power distribution and so on. In losing the phase lock to the received signals in a Loran receiver, the inner oscillator of the receiver starts free-running and the performance of the timing synchronization signals which are locked to the oscillator's phase is very severly degraded, so the timing accuracy under 1 us for a Primary Reference Clock (PRC) required in the International Telecommunications Union (ITU) G.811 standard can not be satisfied in the situation. Therefore, in this paper, we propose a method which can compensate the phase jump by using a compensation algorithm when a Loran receiver loses its phase lock and the performance evaluation of the proposed algorithm is achieved by the Maximum Time Interval Error (MTIE) of the measured data. From the performance evaluation results, it is observed that the requirement under 1 us for a PRC can be easily achieved by using the proposed algorithm showing about 0.6 us with under 30 minutes mean interval of smoothing with 1 hour period when the loss of phase lock occurs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.785-790
• /
• 2008

Our Digital Carousel enables user to share media objects through media synchronization mechanism. We implemented the Digital Carousel so that the users participated in collaborative work may refer shared media or error objects as the same view to others. In this paper, we discuss a method for increasing reliability through fault tolerance. We describe the design and implementation of the ER running on distributed multimedia environment. ER is a system which is able to recover automatically a software error based on distributed multimedia. This paper explains a performance analysis of an error recovery system running on distributed multimedia environment using the rule-based DEVS modeling and simulation techniques. In DEVS, a system has a time base, inputs, states, outputs, and functions.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.109-114
• /
• 2004

A new code and its decoding scheme are proposed. With this code, we can correct and detect the errors in communication systems. To limit the runlength of data 0 and augment the minimum density of data 1, a (15, 7) BCH code is modified and an overall parity bit is added. The proposed code is a (16, 7) block code which has the bit clock signal regeneration capability and high error control capability. It is proved that the runlength of data 0 is less than or equal to 7, the density of data 1 is greater than or equal to 1/8, and the minimum Hamming distance is 6. The decoding error probability, the error detection probability and the correct decoding probability are presented for the proposed code. It is shown that the proposed code has better error control capability than the conventional schemes.