• Journal of Plant Biology
• /
• 제38권1호
• /
• pp.33-38
• /
• 1995

Hydroxyurea (HU), a DNA synthesis inhibitor, was tested as synchronizing agent in root-tip meristem of Allium wakegi. Roots were treated with 2.5mM HU for 14 h to accumulate meristem root-tip cells at the G1/S interface. After release from HU block, the cells re-entered the cell cycle with a high degree of synchrony. Synchronized mitotic frequency of A. wakegi was 22.7%, which was about 3.9 times as high as that of the control. The highest metaphase index(23.0%) was obtained when, 6 h after release from the HU block, the roots were treated with 0.05% colchicine for 2 h. Modifying various Giemsa staining protocols defined for animals and a few plant species, G-bands were visualized at prometaphase and metaphase chromosomes of A. wakegi. The higher degree of chromosome condensation, the less differential bands could be resolved. This is the first demonstration introduced partial mitotic synchronization into G-banding in plant.

• 한국정보통신학회논문지
• /
• 제1권2호
• /
• pp.193-197
• /
• 1997

In this paper, we propose a new PN chip clock generator which employs two synchronous counters to achieve precise phase control of chip clock. In a CDMA code acquisition and tracking system, the PN chip clock is required to operate highly reliable without any glitch even under harsh environment condition such as temperature and voltage fluctu-aliens. The digital implementation of the proposed PN chip clock generator imparts it with much desired reliability. Since the proposed chip clock generator can be easily controlled into one of the states: free running, phase advance, and delay state, it can be applied to data processing as well as code synchronization. We have done FPGA implementation of the proposed logic and have verified its satisfactory operation up to 50 MHz.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.381-388
• /
• 2018

A novel and simple algorithm for accurate calculation of RMS voltage is proposed in a digitally controlled grid-tie inverter system. Given that the actual frequency of grid voltage is continuously changing, the constant sampling frequency cannot be a multiple number of the fundamental frequency. Therefore, the RMS of grid voltage contains periodic oscillations due to the differences in the phase angle of sampled data during calculation. The proposed algorithm precisely calculates and updates the initial phase angle of the first sampled voltage in a half-cycle period using phase-locked loop, which is commonly utilized for phase angle detection in grid-tie inverter systems. The accuracy and dynamic performance of the proposed algorithm are compared with those of other algorithms through various simulations and experiments.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.411-416
• /
• 2000

Cutting process has been automated by progress of CNC and CAD/CAM, but polishing process has been depended on only experiential knowledge of expert. To automate the polishing process, a polishing robot with w degrees of freedom which is attached to a machining center with 3 degrees of freedom has been developed. This automatic polishing robot is able to keep the polishing tool normal on the curved surface of die to improve a performance of polishing. Polishing task for a curved surface die demands repetitive operation and high precision, but conventional control algorithm can not cope with the problem of disturbance such as a change of load. In this research, a new sliding mode control algorithm is applied to the robot. The signal compression method is used to identify polishing robot system. to obtain an effect of 5 degrees of freedom motion, a synchronization between the machining center and polishing robot is accomplished by using M code of machining center. And also a trajectory for polishing the curved surface die by 5 degrees of freedom motion, a synchronization between the machining center and polishing robot is accomplished by using M code of machining center. And also a trajectory for polishing the curved surface die by 5 axes machining center is divided into data of two types for 3 axes machining center and 2 axes polishing robot. To evaluate polishing performance of the robot. various experiments are carried out.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.11-16
• /
• 2020

In this paper, system that includes multiple unmanned aerial vehicles (UAVs) are considered. The vehicles are equipped with a mission computer for a specific mission and equipment. The mission equipment operates based on the time of mission computer. Also, data collected by flight computer and mission computer is saved with the time of each operating system. Generally, time offset between multiple computers always exists, though the computers are connected to the Internet. When the data collected by multiple computers is combined, the time offset causes damage on reliability of the combined data. Computers that connected to the Internet are synchronized by network time protocol (NTP). This paper proposes a system that the time of multiple mission computers are synchronized by the same NTP server to minimize the time offset. In the results of the measurement, the system time offset of multiple mission computer is maintained within 10ms from the system time of the server computer.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.723-728
• /
• 2015

In the conventional hot rolling process, the defects of products such as scratches occur due to impact and friction. Impact occurs as a result of the contact of between rollers and the slab. Also, friction occurs in the rolling process. To improve these defects, a variety of processes were developed. The flying touch method is also one of the processes to reduce defects and uses a movable upper roller. To use this unfixed roller, the impact and frictions between rollers and the slab should be minimized. This paper proposes a hot rolling process simulator to verify and test the efficiency of the flying touch method. The simulator was designed to verify the method. This paper also proposes a new impact reducing method and velocity synchronization method which are simulated to realize the method.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.293-299
• /
• 2010

The multiple block localization method in a wide area for multiple robots using iGS is proposed in this paper. The iGS is developed for the indoor global localization using ultrasonic and RF sensors. To measure the distance between a mobile robot and a beacon, the tag on the mobile robot wakes up one beacon to send out the ultrasonic signal and measures the traveling time from the beacon to the mobile robot. As the number of robots is increased, the sampling time of localization also becomes longer. Note that only one robot can localize its own position calling beacons one by one during each of the sampling interval. This is a severe constraint for the localization of multiple robots in a wide area. This paper proposes an efficient localization algorithm for the multiple robots in a wide area which can be divided into multiple blocks. For a given block, a master beacon is designated to synchronize robots. By the access of the synchronization signal, each beacon in the selected group sends out an ultrasonic signal. When the robots in the block receive the ultrasonic signal, they can calculate their own locations based on the distances to the beacons, which are obtained by the multiplication of flight time and velocity of the ultrasonic signal. The efficiency of the algorithm is verified through the real experiments.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.126-133
• /
• 2007

Lately, there exist growing demands to increase the firepower of mid-calibre automatic guns despite spatial limitations of armament. In this context, ammunitions of simple cylindrical shape are considered so advantageous that associated automatic guns are under development incorporating an intermittently rotating chamber mechanism. In this paper, relevant subsystems for such guns are to be described, and a digital controller to automate the entire system as well. Via dynamic simulations it proves to function well being able to drive the chamber at any constant speed up to 200spm, which is merely limited by the recoil performance. It is remarkable that the system synchronization idea in use is applicable to any other multi-actuator systems that should operate on the basis of event rather than time.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.332-341
• /
• 2013

SCADA RTU is a remote control unit equipped in substations for automatic operation of a power system. The RTU monitors and measures the operation status of remote substations to transmits the signals to upper SCADA system and receives control command signals from dispatch center to actuate corresponding apparatus. The RTU receives the standard time from GPS receiver to synchronize the times for all devices and acquires the status event of power apparatus using DIM. Without the time synchronization between GPS and RTU, stable operation of the power system and accurate analysis of the system fault are impossible due to the time error of SOE. In this paper, a test is performed to identify if the operation time of SCADA RTU DIM coincides with the standard time. And we tried to find the reason of error, to minimize the time discrepancy. Through this study, RTU operation time could be synchronized with the standard time within 10[ms] to improve the reliability of SOE data.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.891-897
• /
• 2006

The coverage of the NDGPS is nationwide currently and by 2007 more than 2 NDGPS signal will be available in most of Korean peninsula both coastal area and inland. The role of NDGPS beacon is transmitting pseudorange corrections however if range or pseudorange can be measured from NDGPS beacon signal, it might be possible to construct an independent regional navigation system: The range from NDGPS beacon signal can be used as additional measurements to remove GPS shadow area and to improve accuracy and reliability of GPS. Furthermore, by adding Loran-C, a regional radio navigation system without GPS can be possible. In this paper, a feasibility study on the regional positioning system using NDGPS and LORAN-C are given. The results show that the NDGPS and LORAN-C can be used as a ground based regional navigation system if requirements such as synchronization of NDGPS network, dual coverage of NDGPS, navigation algorithm for both NDGPS and LORAN-C measurements and an efficient ASF compensation method are met.