• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.324-331
• /
• 2018

This paper describes a symmetric method for determining a combination of element power and optical material to design a catadioptric system with corrected color aberration and flat Petzval curvature. To graphically obtain the solutions, a glass chart containing the Abbe number, the refractive index, and the optical power, which are closely related to these aberrations, is suggested. First, we recompose an optical system as a doublet of the specific lens and an equivalent single lens, and then locate both lenses on lines that are symmetric to each other on a glass chart, through changing the lens parameters effectively. Utilizing this method, an achromatic catadioptric system with flat Petzval curvature is obtained.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1109-1112
• /
• 2002

A non-coherent synchronous all-optical code-division multiple-access (CDMA) network is proposed. In this network, symmetric codes derived from prime sequence codes are used. We present the construction of symmetric codes and show that the pseudo-orthogonality of the new codes is the same as that of the original prime-sequence codes while the cardinality of the new codes is larger than that of the prime sequence codes and the modified prime codes in the same field GF(p). Therefore, an optical CDMA LAN using symmetric codes can have a larger number of potential subscribers. The new codes allow designing fully programmable serial all-optical transmitter and receiver suitable for low-loss, high-capacity, optical CDMA LANs. It is also shown that compared to systems using modified prime codes the proposed system can achieve better BER performance for low received chip optical power.

• Journal of information and communication convergence engineering
• /
• v.21 no.2
• /
• pp.103-109
• /
• 2023

We investigated the antipodal-symmetric dispersion maps of a dispersion-managed link with a midway optical phase conjugator to compensate for the distorted 960 Gb/s wavelength division multiplexed (WDM) signal caused by these effects. The proposed antipodal-symmetric dispersion map has various shapes depending on the detailed design scheme. We confirmed that the dispersion-managed link designed with the dispersion map of the antipodal-symmetric structure is more advantageous than the conventional uniform dispersion map for compensating WDM channels. It was also confirmed that among the antipodal-symmetric structures, the dispersion map configured with the S-1-profile, in which S is inverted up and down, was more effective for distortion compensation than the dispersion map configured with the S-profile. In particular, we confirmed that the S-1-profile can broaden the optical pulse width intensively at a short transmission distance, more effectively compensating for the distorted WDM channel. Because this structure makes the intensity of the optical pulse relatively weak, it can decrease the nonlinear Kerr effect.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.121-127
• /
• 2013

When input power is small, nonideal symmetric balance incomplete block design(BIBD) code design is effective in the spectral-amplitude-code(SAC) optical code-division multiple-access (OCDMA) system. But the number of simultaneous users is not sufficient. To overcome this property, we propose 2-D BIBD codes, where nonideal BIBD codes are used as spectral code and ideal BIBD codes are used as spatial codes. Analytical results show that the number of simultaneous users increases significantly.

• Journal of information and communication convergence engineering
• /
• v.13 no.4
• /
• pp.228-234
• /
• 2015

The system performance improvement in dispersion managed (DM) links combined with optical phase conjugator (OPC) for compensating for optical signal distortion due to group velocity dispersion and nonlinear fiber effects has been reported. However, in DM link combined OPC, the equalities of the lengths of single-mode fibers (SMFs), the length of dispersion compensating fibers (DCFs), the dispersion coefficient of DCF, and the residual dispersion per span (RDPS) with respect to an OPC restrict a flexible link configuration. Thus, in this paper, we propose a flexible optical link configuration with inequalities of link parameters, the so-called "pseudo-symmetric configuration." Simulation results show that, in the restricted RDPS range of 450 ps/nm to 800 ps/nm, the improvement in the system performance of the proposed pseudo-symmetrically configured optical links is better than that of the asymmetrically configured optical links. Consequently, we confirmed that the proposed pseudo-symmetric configuration is effective and useful for implementing a reconfigurable long-haul wavelength-division multiplexing (WDM) network.

• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.286-292
• /
• 2021

Dispersion maps of antipodal symmetric type for improvement of compensation effect in dispersion managed link combined with optical phase conjugation, which can compensate for the distorted wavelength division multiplexed (WDM) signals due to chromatic dispersion and nonlinear Kerr effects of single-mode fiber, were proposed. It was confirmed that the proposed all of antipodal symmetric dispersion maps was more effective to compensate for the distorted WDM channels than the conventional link of uniform type dispersion map. Especially, dispersion maps formed like the inversion of alphabet S were more advantageous as the distorted WDM channels were compensated than dispersion maps formed like alphabet S. It was expected that the variety of optical network topology was more expanded by applying the proposed antipodal symmetric dispersion maps into transmission link.

• Journal of information and communication convergence engineering
• /
• v.20 no.4
• /
• pp.235-241
• /
• 2022

A dispersion map was proposed to improve the compensation effect of a distorted WDM (wavelength division multiplexed) channel in a dispersion-managed link coupled with optical phase conjugation. The dispersion map is an origin-symmetric structure around the optical phase conjugator in the middle of the transmission path. In addition, the dispersion map has a form in which a constant dispersion accumulation pattern is repeated regularly. Through simulation, we confirmed that the application of the origin-symmetric dispersion map with a repetitively shaped configuration was more effective in compensating for the distorted WDM channel than in the dispersion-managed link with a conventional dispersion map. In addition, we confirmed that the compensation effect could be increased when the cumulative dispersion distribution of the origin-symmetric distribution map had a positive value in the first half section and a negative value in the second half section. Further, we observed that as the number of repeated dispersion accumulation patterns increased, the residual dispersion per span should also be increased.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2001

This research chose the existing designed copier zoom lens system and analyzed to calculate the optical capacity. As this lens system was the zoom lens system of finite object point, differed form the general camera zoom lens of infinite object point, it got a limited movement range because it moved between the fixed object and the image. In the result of comparison the optical capacities between a symmetric form and a asymmetric form. We could find out the truth which a asymmetric form constituted comparative stable aberrations and existed a tracks of effort for aberration correction. Therefore, a symmetric form is allotted satisfactorily from improved aberrations by itself in the fixed focal lens system. However, it has a limit of improving for capacity when it is used a zoom lens system got a symmetric form.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.6
• /
• pp.609-617
• /
• 2014

We have studied a chip-on-board LED lighting optical system for various luminous-intensity-distribution angles of the LED. An optical system that can accept different LEDs was made to reduce the systems's weight and size as we selected the chip-on-board LED, which is easy to apply to optical systems, unlike existing package-on-board LEDs. The luminous-intensity-distribution angles were $45^{\circ}$, $60^{\circ}$, $90^{\circ}$, and $120^{\circ}$. We researched these four types of optical systems. The $45^{\circ}$ and $60^{\circ}$ units were developed into reflectors, and the $90^{\circ}$ and $120^{\circ}$ units, into lenses. We checked the performance of the designed optical system through simulation and made a mock-up. Then we made a prototype of the chip-on-board LED high bay for use with the mock-up. After measuring its performance, we tested the luminous-intensity-distribution angles and compared them with simulation data. The resulting prototype was developed considering brightness, light uniformity, age, and economics which are suitable for a factory environment.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.217-222
• /
• 1990

A general ray tracing scheme has been developed for using a personal computer which trace finite rays through any non-rotationally symmetric system. This scheme may be used for the surface type such as conic section with or without aspherics, toric surfaces, sagittal and tangential cylindrical sections and axicons. Specially, any combinational of decentered, tilted and rotated surfaces has been considered. Before transfering to the next surfaces, the local coordinates are refered back to an initial reference coordinate system. We can get a mathmtical model of a non-rotationally symmetrical finite ray trace running on an inexpensive personal computer.