• 호남수학학술지
• /
• 제45권2호
• /
• pp.325-339
• /
• 2023

The object of the present work is to study a generalized W₃ recurrent manifold. We obtain a necessary and sufficient condition for the scalar curvature to be constant in such a manifold. Also, sufficient condition for generalized W₃ recurrent manifold to be special quasi-Einstein manifold are given. Ricci symmetric and decomposable generalized W₃ recurrent manifold are studied. Finally, the existence of such a manifold is ensured by a non-trivial example.

• 대한수학회보
• /
• 제61권2호
• /
• pp.511-517
• /
• 2024

Let (M, p) denote a noncompact manifold M together with arbitrary basepoint p. In [7], Kondo-Tanaka show that (M, p) can be compared with a rotationally symmetric plane M_m in such a way that if M_m satisfies certain conditions, then M is proved to be topologically finite. We substitute Kondo-Tanaka's condition of finite total curvature of M_m with a weaker condition and show that the same conclusion can be drawn. We also use our results to show that when M_m satisfies certain conditions, then M is homeomorphic to ℝⁿ.

• 대한두경부종양학회지
• /
• 제31권2호
• /
• pp.58-62
• /
• 2015

Benign symmetric lipomatosis, also known as Madelung's disease, Launois-Bensaude syndrome and multiple symmetric lipomatosis is a cutaneous condition characterized by extensive symmetric fat deposits in the neck, shoulders, and upper trunk. But symmetrical lipomatosis of the tongue is very rare and characterized by involvement exclusively of the tongue, invasiveness, and absence of encapsulation of the adipose tissue. A 75-year-old man presented with about a year history of painless tongue masses on both lateral border. Bilateral partial glossectomy was performed and subsequently was confirmed as symmetrical lipomatosis pathologically. We report this case with a review of the literatures.

• 한국소음진동공학회논문집
• /
• 제14권1호
• /
• pp.50-55
• /
• 2004

In this study, slit-tones by plane impinging jet are investigated experimentally over the whole subsonic flow range, especially at low speeds, in order to obtain the instability behaviour of impinging plane jet. Slit-tones are generated at low speeds associated with laminar shear layer instability as well as at high speeds associated with turbulent instability. Most of low-speed slit-tones are induced by symmetric mode instability unless the slit is not so wide, in which case antisymmetric modes are induced like edge-tones. It is found that the frequencies at low speeds ate controled by the unstable condition of the vortex at the nozzle exit and its pairings by which the frequencies are decreased by half. In the case of symmetric modes related with low-speed slit-tones, frequencies lower than those associated with one-step pairings are not found.

• 한국경영과학회지
• /
• 제22권4호
• /
• pp.71-80
• /
• 1997

In this paper, we consider with a market pioneering game among symmetric firms in highly competitive situation. To describe the puzzling situation of timing competition, we construct a dynamic game model and explore the equilibrium solution. As a result, we find a subgame perfect mixed strategy Nash equilibrium conceptually defined by 't$_{0}$ + .elsilon. equilibrium'. Our major finding s include : i) market entry will be occurred in sequential manner even though the condition of each firm is symmetric ii) the optimal timing of market pioneering will be advanced until almost all of the monopolist's profit is dissipated, iii) as the market position of the pioneer is stronger, the timings of the pioneer and the follower are separated, iv) and as the slope of the profit flow is steeper, the entry timing of the two players will be pooled together.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.361-375
• /
• 2014

The main aim of this paper is to investigate the relationship between thickness and height of the axially symmetric cylindrical reinforced concrete (RC) walls by the help of a meta-heuristic optimization procedure. The material cost of the wall which includes concrete, reinforcement and formwork, was chosen as objective function of the optimization problem. The wall thickness, compressive strength of concrete and diameter of reinforcement bars were defined as design variables and tank volume, radius and height of the wall, loading condition and unit cost of material were defined as design constants. Numerical analyses of the wall were conducted by using superposition method (SPM) considering ACI 318-Building code requirements for structural concrete. The optimum wall thickness-height relationship was investigated under three main cases related with compressive strength of concrete and density of the stored liquid. According to the results, the proposed method is effective on finding the optimum design with minimum cost.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.45-52
• /
• 2004

Exact solution on the anti-symmetric response of ships having uniform sectional properties in waves is derived. Boundary value problem consisted of Timoshenko beam equation and free-free end condition is solved analytically. The responses are assumed as linear and wave loads are calculated by using strip method. Horizontal bending moment, shear force and torsional moment are calculated. The developed analysis model is used for the benchmark test of the numerical codes in this problem. Also the application on the preliminary design of barge-like ships and VLFS (Very Large Floating Structure) is expected

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.69-76
• /
• 1994

Thermal elasto-plastic analysis of axi-symmetric body by the finite element method is presented in this paper for analyzing the process of upset forming of circular section extruded bar. The example of calculation for upset forming of Nimonic extruded bar is also presented. It is shown that remeshing of quadrilateral finite element is necessary because the very highly distorted element by plastic deformation disturbs the calculation. Calculated values for nodal points in new mesh are obtained from nodal points of old mesh by linear interpolation method. The experimental results are compared with calculated values. The appearance of upsetupset forming obtained by experimental method is very similar to that obtained by calculations. So, it is proved that the thermal elasto-plastic analysis of axi-symmetric body by the finite element method is very useful for finding the optimum upsetting condition.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.34-41
• /
• 1997

The dimension measurement problem of products has been a major concern in the quality control in the industrial fields. A non-contacting measurement system using the vision sensor is proposed in this paper. The system consists of a CCD camera for the image capture, a frame grabber for the acquired image processing, a laser unit for the illumination, scanning unit for the measurement, and a personal computer for the geometry computation. The slit beam which is generated by passing the laser beam through a cylin- drical lens is fired to the axial-symmetric object on the rotating plate. The image of objects reflected by the laser slit beam, acquired by the CCD camera, becomes much brighter than the other parts of objects. After the histogram of brightness for the captured image is calculated, low intensity pixels are filtered out by threshold method. The performance of proposed measurement system is obtained for several different axial symmetric objects. The proposed system is verified as a good tool for measuring axial-symmetric parts in a limited condition with a minor investment cost.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.131-136
• /
• 2008

The transducer for multi-directionally movable ultrasonic motor having lambda shaped vibrators has been proposed and designed. The two branches cross at a right angle with each other at the tip. FEM analyses of lambda shaped transducer were carried out to find vibration modes for ultrasonic motor. The lambda shaped transducer has one symmetric mode and two anti-symmetric modes. The symmetric mode generates the normal direction motion of the tip. The lateral and vertical direction motion of the tip are excited by two anti-symmetric modes. The normal and lateral direction motions made an lateral elliptic trajectory. And the normal and vertical direction motions made an vertical elliptic trajectory normal to previous one. The transducer with 1 mm in thickness and 25 mm in length has been fabricated and evaluated. The resonance frequencies of the transducer was 32 kHz and 103 kHz. The tangential and vertical vibration displacement of the transducer having the lateral elliptic trajectory were $1.5{\mu}m\;and\;1.1{\mu}m$, respectively at the driving voltage of 100 Vpp and frequency of 32 kHz and 103 kHz. And the tangential and vertical vibration displacement of the transducer having the vertical elliptic trajectory were $0.4{\mu}m\;and\;0.2{\mu}m$, respectively at the same driving condition.