• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.103-109
• /
• 2015

In an amplitude-splitting interferometer, a beam splitter divides an input beam into two parts, which are superposed after propagating along separate paths, producing an interference effect. We have investigated the phase relation between the reflected and transmitted light waves at BS's made of lossless dielectric stacks. If we define the phases with proper reference planes, a definite phase relation exists, irrespective of the detailed structure of the layers in the BS. Although this results from the generalized Stokes relations, we have verified it numerically for two representative BS's with symmetric and asymmetric layer structures respectively. When we applied the phase relation to interferometers, we could determine the superposition state of the output beam (either constructive or destructive interference) for a general BS, and could verify that the light's energy was conserved.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.11
• /
• pp.15-23
• /
• 2015

An experimental study has been conducted to evaluate the effects of average and cyclic shear stresses on the undrained failure behaviors of dense marine silty sand by using the Cyclic Direct Simple Shear apparatus. The results show that when the average shear stress ratio is zero, symmetric cyclic shear deformation is the major component of deformation, and permanent shear deformation is relatively small. On the other hand, when the average shear stress ratio is larger than zero, asymmetric permanent shear deformation is the major component, and cyclic shear deformation does not change much as the number of cyclic loads increases. The average shear stress ratio has less effects on the number of cyclic loads needed to fail, as compared with the cyclic shear stress ratio. The proposed stress-dependent failure contour can effectively be used to assess the cyclic shear strength of soil beneath the foundation for the design of offshore structures.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.193-201
• /
• 1992

A new equivalent curved beam theory is developed for the analysis of the corner part of ship structures, in which effects of distributed loads and asymmetricity with two or three connected parts are considered. Equivalent loads are obtained from equilibrium conditions between the distributed loads and the member forces and moments at the ends of curved beam. And an equivalent curved beam for the asymmetric structure is obtained by superposing the equivalent symmetric parts which have equivalent stiffness. From the sample calculation, it is found that the results of the new equivalent curved beam theory are well agreed with those of finite element method using membrane elements with little computing time and sufficient accuracy.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.179-190
• /
• 2004

Precambrian metamorphic rocks of Yeongyang-Uljin area, which is located in the eastern part of Sobaegsan Massif, Korea, are composed of Pyeonghae, Giseong, Wonnam Formations and Hada leuco granite gneisses. These show a zonal distribution of WNW-ESE trend, and are intruded by Mesozoic igneous rocks and are unconformably overlain by Mesozoic sedimentary rocks. This study clarifies the deformation history of Precambrian metamorphic rocks after the formation of gneissosity or schistosity on the basis of the geometric and kinematic features and the forming sequence of multi-deformed rock structures, and suggests that the geological structures of this area experienced at least four phases of deformation i.e. ductile shear deformation, one deformation before that, at least two deformations after that. (1) The first phase of deformation formed regional foliations and WNW-trending isoclinal folds with subhorizontal axes and steep axial planes dipping to the north. (2) The second phase of deformation occurred by dextral ductile shear deformation of top-to-the east movement, forming stretching lineations of E-W trend, S-C mylonitic structure foliations, and Z-shaped asymmetric folds. (3) The third phase deformation formed I-W trending open- or kink-type recumbent folds with subhorizontal axes and gently dipping axial planes. (4) The fourth phase deformation took place under compression of NNW-SSE direction, forming ENE-WSW trending symmetric open upright folds and asymmetric conjugate kink folds with subhorizontal axes, and conjugate faults thrusting to the both NNW and SSE with drag folds related to it. These four phases of deformation are closely connected with the orientation of regional foliation in the Yeongyang-Uljin area. 1st deformation produced regional foliation striking WNW and steeply dipping to the north, 2nd deformation locally change the strike of regional foliation into N-S direction, and 3rd and 4th deformations locally change dip-angle and dip-direction of regional foliation.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.194-200
• /
• 2006

Self-assembled InAs/InAl(Ga)As quantum dots (QDs) were grown on InP substrates by a molecular-beam epiaxy, and their structural and optical properties were investigated by atomic force microscopy (AFM), transmission electron microscopy (TEM), and room-temperature photoluminescence (PL). AFM images indicated that the InAs quantum structures showed various shapes such as quantum dashes, asymmetric and symmetric QDs mainly caused by the initial surface conditions of InAl(Ga)As with the intrinsic phase separation. For the buried InAs QDs in an InAlGaAs matrix, the average lateral size and height of QDs were 23 and 2 nm, respectively. By changing the growth conditions for the QD samples, the emission wavelength of $1.55{\mu}m$ was obtained, which is one of the wavelength windows for fiber optic communications.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.19-25
• /
• 2002

Ternary $xSrO-yB_2O_3-0.1Al_2O_3$ and $xSrO-yB_2O_3-0.1SiO_2$ glasses were prepared as a function of R(${\equiv}x/y$). The fraction of four-coordinated brans ($N_4$), symmetric three-coordinated barons ($N_{3S}$), and asymmetric three-coordinated barons ($N_{3A}$) were determined quantitatively to study the structures of these glasses by $^{11}B$ NMR. The values of $Q_{cc}$ and ${\eta}$ for $BO_3$ unit in the glasses were 2.74MHz and 0.22, those for $BO_3{^-}$ unit were 2.54MHz and 0.55, and those for $BO_4$ unit 0.60~0.75MHz and 0.00, respectively. The structure of SrBAl glass at $R_{1st}$ consisted of tetraborate ($[B_8O_{13}]^{-2}$) units and 1st-modified diborate ($[B_2Al_2O_7]^{-2}$) units, and those for the glass at $R_{max}$consisted of diborate ($[B_4O_7]^{-2}$) units, metaborate ($[BO_2^{-1}]$), 1st-modified diborate units, and 2nd-modified diborate ($[B_2Al_2O_8]^{-4}$) units. Due to the oxygens introduced from the strontium oxide. $AlO_4$ units were preferably formed rather than $BO_4$ units. And, the structure of SrBSi glasses in the region $R{\leq}0.5$ could be viewed as binary $SrO-B_2O_3$ glasses structure diluted by silicate oxide: therefore, the Si atoms of the glasses did not contributed to the change the configuration around the boron atoms. The silicate oxide was formed the $SiO_4{^-}$ units rather than the $BO_3{^-}$ units by the oxygens introduced from the storntium oxide in the region of $R{\geq}R_{max}$, and structure of those glass at $R_{max}$ consisted of diborate units, metaborate units loose $BO_4([BO_2]^{-1})$, and $SiO_4{^-}([SiO_{2.5}]^{-1})$ units.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.252-264
• /
• 2023

This paper proposes a design of a dual-band band-pass filter that integrates a λg/2 open SIR structure, a transmission line, and a fork-type structure with symmetric and asymmetric open stubs. To obtain the dual-band effect, the proposed filter uses the SIR structure and adjusts the impedance ratio of the SIR structure. Therefore, the position of the harmonics of the filter is shifted through the adjustment of the impedance ratio, and this can obtain a double-band effect. In order to obtain the dual-band characteristics, the dual-band effect is obtained by inserting a open stub between the SIR structures with the SIR structure divided in half. In addition, the second frequency response is obtained by adjusting the length of the open symmetrical stub in the fork-shaped structure. The asymmetrical open stub in the fork form achieves optimum bandwidth by adjusting the length. Therefore, the first center frequency of the proposed band-pass filter is 5.896 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.13 dB and 33.6 dB. The second center frequency is 5.906 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.15 dB and 19.8 dB. The reason is that when the impedance ratio (Δ) is higher than 1, the position of the harmonic is shifted to a lower frequency band. However, if the impedance ratio (Δ) is lowered by one step, the position of harmonics will move to a higher frequency band. The function of the filter designed using these characteristics can be obtained from the measurement result. The proposed band-pass filter has no coupling loss and no via energy concentration loss because there is no coupling structure of input/output and no via hole. Therefore, system integration is possible due to its excellent performance, and it is expected that dedicated short-range communication (DSRC) system applications used in traffic communication systems will be possible.

• Journal of Distribution Research
• /
• v.16 no.2
• /
• pp.119-138
• /
• 2011

Internet commerce has been growing at a rapid pace for the last decade. Many firms try to reach wider consumer markets by adding the Internet channel to the existing traditional channels. Despite the various benefits of the Internet channel, a significant number of firms failed in managing the new type of channel. Previous studies could not cleary explain these conflicting results associated with the Internet channel. One of the major reasons is most of the previous studies conducted analyses under a specific market condition and claimed that as the impact of Internet channel introduction. Therefore, their results are strongly influenced by the specific market settings. However, firms face various market conditions in the real worlddensity and disutility of using the Internet. The purpose of this study is to investigate the impact of various market environments on a firm's optimal channel strategy by employing a flexible game theory model. We capture various market conditions with consumer density and disutility of using the Internet.