• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.132-136
• /
• 1995

This study was carried out to elucidate the effective of some swelling agents on the soaking treatment of raw silk. The swelling of raw silk is commonly practiced by soaking in warm water, However, it is not enough to weaving of raw silk. Therefore, the combination of some chemical agents were tested to improve the swelling ratio of raw silk. The pretreatment of raw silk in 0.4N sodium carbonate aqueous solution before soaking in the mixed solution of Emulon 1 g/l, Emanol 0.5 g/l and 0.04N sodium silicate increased the swelling ratio by 57%, compared to the nontreatment. In SEM observation, the surface of raw silk soaked in swelling agents was swollen and smoothed.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.407-413
• /
• 1986

In an agitated bead reaction system, the enzymatic saccharification of uncooked starch was substantially enhanced. The enhancement mechanism was investigated front the view of the structural aspect of starch. The mechanical impact caused by the movement of the attrition-milling media resulted neither the destruction of microcrystalline structure nor the fragmentation of starch granule. instead, the most distinct phenomenon was the swelling of starch granule up to about 2.5 times, and the swelling mechanism was not similar with that caused by cooking. However, in the case of the enzyme addition in the attrition coupled reaction system, the swollen starch was easily fragmented into the large number of small particles by the synergistic action of the enzyme and milling-media. The exposed surface area of the fragmented particles plays the major role in enhancing the saccharification. The saccharification rate was quite different depending on the source of starch, the reason was discussed in terms of the granular structure of uncooked starches.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.39-45
• /
• 1999

Refining in papermaking plays an important role in changing fiber properties as well as paper properties. The major effects of refining on pulp fibers are internal and external fibrillation, fiber shortening, and fines formation. Many workers showed that internal fibrillation of the primary refining effects was most influential in improving paper properties. In particular, refining produces separation of fiber walls into several lamellae, thus causing fiber wall swelling with water penetration. This leads to the increase of fiber flexibility and of fiber-to-fiber contact during drying. If the fibers are very flexible, they will be drawn into close contact with each other by the force of surface tension as the water is removed during the drainage process and drying stages. In order to study the effect of fiber wall delamination on paper properties, cross-sectional image of fibers in a natural condition had to be generated without distortion. Finally, it was well recognized that confocal laser scanning microscope (CLSM) could be one of the most efficient tool for creating and quantifying fiber wall delamination in combination with image analysis technique. In this study, the CLSM could be used not only to observe morphological features of transverse views of swollen fibers refined under low and high intensity, but also to investigate the sequence of fiber wall delamination and fiber wall breakage. From the CLSM images, increasing the specific energy or refining decreased the degree of fiber collapse, fiber cross-sectional area, fiber wall thickness and lumen area. High intensity refining produced more external fibrillation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.548-553
• /
• 2004

Patties were prepared using Barbari male goats meat (age about 4 yrs) and packed in HDPE under vacuum (VP) and aerobically (AP). Packed patties were stored at 4$\pm$1$^{\circ}C$ and evaluated for physico-chemical, microbiological and sensory changes on days 0, 5, 10, 15, 20 and 25. Overall mean water activity ($a_{w}$), moisture (%), fat (%), pH, TBA number and W-B shear force values (kg/$cm^{2}$) of patties were 0.983, 61.93, 18.39, 6.38, 0.150 and 0.86, respectively. Except pH that was significantly higher and TBA number significantly lower in VP patties, treatment had no significant (p>0.05) effect on other physico-chemical traits. However, storage period significantly (p<0.05) affected physico-chemical traits. Moisture (63.79%) and $a_{w}$ (0.985) were significantly (p<0.05) higher on day 25. Patties became firmer on day 20 onwards as indicated by higher W-B shear force. Though packaging method had no significant effect, storage period influenced microbial counts. The standard plate counts (SPC), which were initially log 5.98 CFU/g decreased significantly (p<0.05) on day 10 followed by steady increase and reaching log 4.89 on day 25. Almost similar trend was observed for psychrotrophic bacteria counts. Lactic acid bacteria counts declined as the storage period progressed. Coliforms, and yeast and mould counts were either not detected by the method used or were very low in numbers. All samples of AP patties revealed swollen, greasy and sticky surface with spongy texture on day 20 whereas only some of the VP patties shown such changes on day 20. Results indicated that vacuum packaging had definite advantage in preserving the sensory quality of patties than aerobic packaging but it did not help in extending the shelf-life beyond 15 days.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.23 no.1
• /
• pp.107-113
• /
• 2011

Infection effect of $Nosema$ $bombyics$ on the midgut of silkworm $Bombyx$ $mori$ and subsequent appearance of spores and the performance of larvae was studied. Autopsy of larvae showed white pustules on the surface of midgut at 5 days of post infection (pi). At later stage, important organs like midgut, silk gland and gonads reduced in size and all these organs showed white pustules. Light microscope observation of pustules revealed enormous spores. Spore multiplication was at a faster rate in young larvae. Infection of the adult larvae resulted in pebrinized pupa and moths. Larval weight, cocoon weight and cocoon shell ratio reduced as the post infection period increased. Transverse sections of midgut showed $N.$ $bombycis$ infection limited to a few columnar cells at 3-5 days of pi. At 7 days pi, cell volume increased, cells were swollen and elongated. Heavily infected cells looked like sacks filled with parasite and the apical region of certain cells were bulging into the gut lumen. Later at 8-9 days of pi, spores or its developing stages leaked into the lumen either freely or enclosed within the globules of host cytoplasm. Besides columnar cells, development of $N.$ $bombycis$ was observed in the regenerative cells and rarely in goblet cells. Development of $N.$ $bombycis$ was also observed in both longitudinal and circular muscles at the late pi period. The histopathological changes, deformities and spore production time in the host were all influenced by the spore dosage and age of the host.

• Journal of the Korean Wood Science and Technology
• /
• v.1 no.2
• /
• pp.3-10
• /
• 1973

This study was carried out to examine the characeristics of waste sanders(S)from. plywood and pre-finishing plywood surface sanding and double saw finishing, as a new extander in urea-formaldehyde resin(UFR) in plywood adhesive, and to focus, adhesive strength using the glue extended with milled sanders(MS) as extender, leveling the optimum amount of MS to be added, and examining the physical properties of glue extended MS & S. Also economical good feasibility of substitution for wheat flour(WF) with MS as a new extender is analyzed and presented in details. Selecting three standard samples of 80, 100 and 180 mesh, sorking them in distilled water at $20^{\circ}C$, 24 hours, redrying at $105^{\circ}C$ and rescreening the sample with standard screen, again, the 3 samples of 80, 100, and 180 mesh are passed 23 percent through 80 mesh sander standard sample 27 percent through on 100 mesh and only 10.9 percent through 180 mesh, respectively. The particle size of retained parts are greater in size of redried form. It seems undoubtly that particles to be extended in glue are got swollen and become greater in size and coarser in shape. The shape of fresh S particles are irregular thin needle with small scale, as shown in Figure 5. PFS are so finer than plywood S that only 9.8 percent of the S retained on 100 mest screen, 24. 30 percent on 100-160 mesh, and 65.9% on 160-180 mesh. But particle size of the fresh S is large enough to make the viscosity of glue direct extended with S too high to apply it glue spreader. The glue extended with milled sanders(MS). 3 hours milled PFS or 6 hours milled plywood S, having particle sizes shown in Tables 7 and 8, as ratio of Reain/MS/WF/water: 100/8/8/10, indicate good viscosity of 16 to 24 ps, as shown in Figure 5, for applying direct to glue spreader, have high tensile-shear strength (adhesive strength), 102.4 kp/$cm^2$, and 94 percent wood failure.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.342-349
• /
• 2016

Characteristics of the swelling-induced wrinkles on the surfaces of natural rubber (NR) film were investigated. The wrinkle structure was generated by swelling of NR film pre-stretched and firmly bonded onto an aluminum substrate in hexane. A novel experimental method was adopted to replicate the swelling-induced wrinkles on the NR film using an epoxy-hardener system. To get insight into the wrinkle parameters; the wrinkle length (L), wrinkle distance (D), wrinkle height (H) and the angle between two consecutive wrinkles (${\theta}$), the cross-sections of the replicas obtained from saturated swollen NR film were examined using an optical microscopy (OM). From the OM images, the wrinkling parameters were measured as a function of the thickness of NR film from 0.42 to 1.76 mm. Also, it was evaluated that the effects of swelling time on the wrinkling parameters. The length (L), distance (D) and height (H) of wrinkles increased as the thickness of the NR film and the swelling time increased. However, the angle between the wrinkles (${\theta}$) showed a sharp decrease up to a swelling time of 200 minutes and slightly decreased afterwards.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.322-327
• /
• 2005

Regression models for determining infection periods of apple white rot were developed based on conidial germination and appressorium formation of Botryosphaeria dothidea. A total of 120 apple fruits were inoculated with the fungal conidial suspension and subjected to 6 temperatures and 10 wetness periods. Conidia germinated and produced appressoria, exhibiting swollen tips of germ tubes on the fruit surface. Conidial germination (G) increased with temperature (T) and wetness period (W), and was described as $G=-89.273+7.649T+7.056W-0.109T^{2}-0.085W^{2}-0.066TW(R^{2}=0.75)$. Less than 2 hr of wetness period were enough for conidia to germinate at 25 to $30^{\circ}C$. Effects of temperature and wetness period on appressorium formation (A) could be explained as $A=-1.540-2.375W+0.045W^{2}+0.213TW(R^{2}=0.77)$. The relationship between conidial germination and appressorium formation ($A_g$) was described as$A_g=0.381-0.227G+0.005G^{2}(R^{2}=0.67)$, suggesting that conidial germination may have to reach approximately $43.7\%$ to initiate appressorium formation. Using the regression equation for conidial germination and the criterion of $43.7\%$ conidial germination, an infection model was developed to determine infection periods based on temperature and wetness period. The infection model with the criterion of $43.7\%$ conidial germination was apparently more conservative than the appressorium formation model in determining possibility of apple infection. The infection model seemed sensitive to variable weather conditions, suggesting possible use of the model for timing fungicide sprays to control white rot of apples in practice.

• Journal of fish pathology
• /
• v.17 no.1
• /
• pp.21-28
• /
• 2004

In late summer of 2001, a new disease "overturn disease" occurred among mud loach (Misgurnus mizolepis) cultured in a farm Chonbuk Province. The fish exhibited a lethargic, erratic and spiral swimming at the water surface. Affected fish showed swollen abdomen with accumulation of air bubbles in the intestinal canal. The bubbles were much larger in the anterior part than in the posterior part. Hematological and histopathological examinations were done. No significant differences were found in RBC count, Ht value and Hb concentration between the diseased and the healthy fish. Gill filaments showed proximal hyperplasia of the respiratory epithelia and fusing of the gill lamella. Hemorrhage and necrosis occurred in the intestinal epithelia and within the lamina propria, and the mucosal epithelia were separated from the muscularis. Hepatocytes underwent atrophy. In the fish experimentally tied between the annal fin and the anus by a thread to confirm accumulation of air bubbles within intestine, accumulation of air bubbles was confirmed. This disease in mud loach appeared to be induced by circulatory disturbances in the intestinal wall owing to accumulation of air bubbles in the alimentary canal after fed high protein diet throughout all culturing period.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.123-128
• /
• 2011

The micropyles on the prefertilized and artificial fertilized eggs of Epinephelus fasciatus were investigated using scanning electron microscope (SEM). The micropyles ($6.6{\pm}0.41\;{\mu}m$) of E. fasciatus eggs were found in the animal pole and theirs shape were observed as a flat crateriform of cylindrical shape. The micropylar vestibule arranged by 6~7 thickened spiral annuli on the ridge and contributed to differentiate and form fertilization cone for blocking to polyspermy by presenting swollen vestibule structure. As E. fasciatus eggs was pelagic, so chorionic surface was an uneven structures such as circular and fillar form nodules. Especially, various pores (0.15~0.55 ${\mu}m$, 230~270 pores) distributed at the only around micropyles, those pores radiately exhibited regular projection structures showing gill filament-shape. These ultrastructural characters of E. fasciatus eggs can be utilized in a taxonomical cue of grouper species.