• 제목/요약/키워드: Switching filter

검색결과 485건 처리시간 0.029초

A Secondary Resonance Soft Switching Half Bridge DC-DC Converter with an Inductive Output Filter

  • Chen, Zhang-yong;Chen, Yong
    • Journal of Power Electronics
    • /
    • 제17권6호
    • /
    • pp.1391-1401
    • /
    • 2017
  • In this paper, a secondary resonance half-bridge dc-dc converter with an inductive output filter is presented. The primary side of such a converter utilizes asymmetric pulse width modulation (APWM) to achieve zero-voltage switching (ZVS) of the switches, and clamps the voltage of the switch to the input voltage. In addition, zero current switching (ZCS) of the output diode is achieved by a half-wave rectifier circuit with a filter inductor and a resonant branch in the secondary side of the proposed converter. Thus, the switching losses and diode reverse-recovery losses are eliminated, and the performance of the converter can be improved. Furthermore, an inductive output filter exists in the converter reduce the output current ripple. The operational principle, performance analysis and design equation of this converter are given in this paper. The analysis results show that the output diode voltage stress is independent of the duty cycle, and that the voltage gain is almost linear, similar to that of the isolation Buck-type converter. Finally, a 200V~380V input, 24V/2A output experimental prototype is built to verify the theoretical analysis.

단상하프브릿지 구조를 갖는 계통연계형 인버터의 필터인덕터 설계 (Filter Design for Utility Interactive Inverters using Single-Phase Half-Bridge Topology)

  • 김효성
    • 전력전자학회논문지
    • /
    • 제12권5호
    • /
    • pp.364-371
    • /
    • 2007
  • 본 논문은 단상하프브릿지 구조를 갖는 계통연계형 전압형 PWM 인버터를 위한 필터설계를 목적으로 한다. 단상하프브릿지 전압형 PWM 인버터의 교류출력단 전압과 계통전압의 관계를 분석하여 필터 인덕터에 순시적으로 인가되는 전압의 특징적인 관계를 정성적 및 정량적으로 파악하였다. 또한 교류출력단 전압의 분석을 기초로 하여 필터인덕터에 흐르는 스위칭리플전류의 크기를 정량적으로 구하였다. 이러한 분석을 기초로 하여 계통주입전류의 기본파성분에 대한 스위칭리플전류의 비율을 평가함수로 하는 필터인덕터의 설계법을 제시하였다. 제안된 설계방법을 시뮬레이션 및 실험을 통하여 검증한다.

Adaptive Switching Median Filter for Impulse Noise Removal Based on Support Vector Machines

  • Lee, Dae-Geun;Park, Min-Jae;Kim, Jeong-Ok;Kim, Do-Yoon;Kim, Dong-Wook;Lim, Dong-Hoon
    • Communications for Statistical Applications and Methods
    • /
    • 제18권6호
    • /
    • pp.871-886
    • /
    • 2011
  • This paper proposes a powerful SVM-ASM filter, the adaptive switching median(ASM) filter based on support vector machines(SVMs), to effectively reduce impulse noise in corrupted images while preserving image details and features. The proposed SVM-ASM filter is composed of two stages: SVM impulse detection and ASM filtering. SVM impulse detection determines whether the pixels are corrupted by noise or not according to an optimal discrimination function. ASM filtering implements the image filtering with a variable window size to effectively remove the noisy pixels determined by the SVM impulse detection. Experimental results show that the SVM-ASM filter performs significantly better than many other existing filters for denoising impulse noise even in highly corrupted images with regard to noise suppression and detail preservation. The SVM-ASM filter is also extremely robust with respect to various test images and various percentages of image noise.

단상풀브릿지 구조를 갖는 계통연계형 인버터의 필터인덕터 설계 (Filter Design for Utility Interactive Inverters using Single-phase Full-bridge Topology)

  • 김효성
    • 전력전자학회논문지
    • /
    • 제12권4호
    • /
    • pp.346-353
    • /
    • 2007
  • 본 논문은 단상풀브릿지 구조를 갖는 계통연계형 전압형 PWM 인버터를 위한 필터설계를 목적으로 한다. 단상풀브릿지 전압형 PWM 인버터의 교류출력단 전압과 계통전압의 관계를 분석하여 필터인덕터에 순시적으로 인가되는 전압의 특징적인 관계를 정성적 및 정량적으로 파악하였다. 교류출력단 전압의 분석을 기초로 하여 필터인덕터에 흐르는 스위칭리플전류의 크기를 정량적으로 구하였다. 이러한 분석을 기초로 하여 계통주입전류의 기본파성분에 대한 리플전류의 비율을 평가함수로 하는 필터인덕터의 설계법을 제시하였다. 제안된 설계방법을 시뮬레이션 및 실험을 통하여 검증하였다.

스위칭 평균 필터를 이용한 임펄스 잡음 제거 (Impulse Noise Removal using Switching Mean Filter)

  • 김국승;김남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.477-481
    • /
    • 2009
  • 본 논문에서는 영상신호의 전송과정에서 임펄스 잡음에 의해 훼손된 영상의 복원을 위해 스위칭 평균 필터를 제안 하였다. 이 필터는 크기가 다른 두 가지 크기의 잡음 검출 마스크를 이용하여 잡음요소와 비 잡음요소로 구분하고 영상내의 검출된 임펄스 잡음밀도에 따라 스위칭 평균 필터를 통해 임펄스 잡음을 제거한다. 대체된 화소는 다음 화소의 처리과정에서 이웃화소로 사용되어지는 재귀형태와 비재귀형태 갖도록 하였다. 그리고 시뮬레이션을 통해 기존의 방법들과 그 성능을 비교하였다.

  • PDF

Soft Switching방식 고역률 강압형 컨버터 (Soft Switching High Power Factor Buck Converter)

  • 구헌회;조기연
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1997년도 전력전자학술대회 논문집
    • /
    • pp.243-246
    • /
    • 1997
  • In this paper, soft switching high power factor buck converter is proposed. This converter is composed of diode rectifier, a input capacitor can be small enough to filter input capacitor can be small enough to filter input current, buck converter with loss less snubber circuit. Converter is operated in discontinous conduction mode, turn of of the switching device is a zero current switching(ZCS) and high power factor input is obtained. In addition, zero voltage switching(ZVS) at turn of is achieved and switching loss is reduced using loss less snubber circuit. The capacitor used in the snubber circuit raised output voltage. Therefore, proposed converter has higher output voltage and higher efficiency than conventional buck type converter at same duty factor in discontious conduction mode operation.

  • PDF

하모닉 드라이브의 토크리플 감소를 위한 조인트 토크센서용 스위칭 노치필터 (A Switching Notch Filter for Reducing the Torque Ripple Caused by a Harmonic Drive in a Joint Torque Sensor)

  • 김준홍;김영렬;송재복
    • 대한기계학회논문집A
    • /
    • 제35권7호
    • /
    • pp.709-715
    • /
    • 2011
  • 로봇 머니퓰레이터의 정밀한 제어를 위하여 하모닉 드라이브와 조인트 토크센서가 널리 사용되고 있다. 하모닉 드라이브는 구조적 특징으로 인하여 토크리플을 발생시키는데, 토크센서와 하모닉 드라이브가 직결된 경우에 토크리플은 토크센서에 전달되어 토크센서를 사용하는 제어기나 관측기의 성능을 저해한다. 본 논문에서는 토크리플과 하모닉 드라이브 속도의 관계를 도출하고, 이를 토대로 토크리플을 효과적으로 감쇄시키는 스위칭 노치필터를 제안한다. 제안된 스위칭 노치필터는 기존에 제시되었던 이론에 비하여 직관적이고, 추가적인 회로부나 기구부 구성이 필요 없으며, 연산량이 적은 장점이 있다. 또한 다양한 실험을 통하여 스위칭 노치필터의 필터링 성능, 빠른 응답속도와 스위칭 안정성을 검증하였다.

랜덤 임펄스 잡음을 제거하기 위한 가중치 스위칭 필터를 이용한 영상 복원 알고리즘 (Image Restoration Algorithm using Weighted Switching Filter for Remove Random-Valued Impulse Noise)

  • 천봉원;김남호
    • 한국정보통신학회논문지
    • /
    • 제24권5호
    • /
    • pp.609-615
    • /
    • 2020
  • 현대 사회는 4차 산업 혁명과 더불어 디지털 장비의 사용이 증가하여 영상 및 신호처리의 중요성이 높아지고 있으며, 이와 함께 잡음 제거에 관한 연구가 활발하게 이루어지고 있다. 본 논문은 랜덤 임펄스 잡음 제거를 위한 스위칭 필터 알고리즘을 제안한다. 제안한 알고리즘은 영상에 존재하는 잡음 수준을 판단하여 임계값을 구하며, 임계값은 입력 화소값과 기준치의 차이와 비교되어 필터의 가중치 스위칭 과정에 사용한다. 필터의 최종 출력은 스위칭에 따라 화소 가중치 및 변형된 가중치 메디안 필터를 적용하여 추정치를 구하며, 추정치와 입력 화소값을 비교하여 최종 출력을 구한다. 제안한 알고리즘의 성능을 평가하기 위해 시뮬레이션 및 PSNR 등을 이용하여 기존 방법들과 비교하였다.

Modeling and Filter Design through Analysis of Conducted EMI in Switching Power Converters

  • Vimala, R.;Baskaran, K.;Aravind Britto, K.R.
    • Journal of Power Electronics
    • /
    • 제12권4호
    • /
    • pp.632-642
    • /
    • 2012
  • This paper presents a filter analysis of conducted Electro-Magnetic Interference (EMI) in switching power converters (SPC) based on noise impedances. The EMI characteristics of SPC can be analytically deduced from a circuit theoretical viewpoint. The analytical noise model is investigated to get a full understanding of the EMI mechanism. It is shown that with suitable and justified model, filters pertinent to EMI noise is investigated. The EMI noise is identified by time domain measurements associated with an isolated half-bridge ac-dc converter. Practical filters like LC filter, ${\pi}$ filter and complete EMI filters are investigated. The proposed analysis and results can provide a guideline for improving the effectiveness of filtering schemes in SPC. Experimental results are also included to verify the validity of the proposed method. The results obtained satisfy the Federal Communications Commission (FCC) class A and class B regulations.

RF MEMS Switches and Integrated Switching Circuits

  • Liu, A.Q.;Yu, A.B.;Karim, M.F.;Tang, M.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권3호
    • /
    • pp.166-176
    • /
    • 2007
  • Radio frequency (RF) microelectromechanical systems (MEMS) have been pursued for more than a decade as a solution of high-performance on-chip fixed, tunable and reconfigurable circuits. This paper reviews our research work on RF MEMS switches and switching circuits in the past five years. The research work first concentrates on the development of lateral DC-contact switches and capacitive shunt switches. Low insertion loss, high isolation and wide frequency band have been achieved for the two types of switches; then the switches have been integrated with transmission lines to achieve different switching circuits, such as single-pole-multi-throw (SPMT) switching circuits, tunable band-pass filter, tunable band-stop filter and reconfigurable filter circuits. Substrate transfer process and surface planarization process are used to fabricate the above mentioned devices and circuits. The advantages of these two fabrication processes provide great flexibility in developing different types of RF MEMS switches and circuits. The ultimate target is to produce more powerful and sophisticated wireless appliances operating in handsets, base stations, and satellites with low power consumption and cost.