References
- L. Ran, "Conducted electromagnetic emissions in induction motor drive systems Part I: Time domain analysis and identification of dominant modes," IEEE Transactions on Power Electronics, Vol. 13, No. 4, pp. 757-767, July 1998. https://doi.org/10.1109/63.704152
- L. Ran, "Conducted electromagnetic emissions in induction motor drive systems Part II: Frequency domain models," IEEE Transactions on Power Electronics, Vol. 13, No. 4, pp. 768-776, July 1998. https://doi.org/10.1109/63.704154
- M.Jin, M.Weiming, P.Qijun, K.Jun, Z.Lei and Z.Zhihua, "Identification of essential coupling path models for conducted EMI prediction in switching power converters," IEEE Transactions on Power Electronics, Vol. 21, No. 6, pp. 1795-1803, Nov. 2006. https://doi.org/10.1109/TPEL.2006.882905
- F. Y. Shih et al., "A procedure for designing EMI filters for AC line applications," IEEE Transactions on Power Electronics, Vol. 11, No. 1, pp. 170-181, Jan. 1996. https://doi.org/10.1109/63.484430
- T. Guo, D. Y. Chen, and F. C. Lee, "Separation of the common-mode and differential-mode-conducted EMI noise," IEEE Transactions on Power Electronics, Vol. 11, No. 3, pp. 480-488, May 1996. https://doi.org/10.1109/63.491642
- Y. Zhao, K.Y. See, "Fundamental of Electromagnetic Compatibility and Application," Beijing, China Machine Press, pp. 165-174, 2007.
- J. R. Regue, M. Ribo, "Common and differential mode characterization of EMI power-line filters from S-parameters measurements," IEEE International Symposium on Electromagnetic Compatibility, Vol. 2, pp. 610-615, 2004.
- F. M. Tesche, "EMC Analysis Methods and Computational Models," Wiley, New York, 1997.
- L. Ran, J. C. Clare, K. J. Bradley, and C. Christopoulos, "Measurement of conducted electromagnetic emissions in PWM motor drive systems without the need for an LISN," IEEE Transactions on Electromagnetic Compatibility, Vol.41, No. 1, pp. 50-55, Mar. 1999. https://doi.org/10.1109/15.748137
- D. Zhang et al., "Measurement of noise source impedance of off-line converters," IEEE Transactions on Power Electronics, Vol. 15, No. 5, pp. 820-825, Sep. 2000. https://doi.org/10.1109/63.867670
- C. R. Paul, "Introduction to Electromagnetic Compatibility," Wiley, New York, 1992.
- R. Vimala, K. Baskaran, K. R. Aravind Britto, "Characterization of Conducted EMI Generated by Switched Power Converters," International Journal of Recent Trends in Engineering, Vol.1, No. 3, pp. 305-307, May 2009.
- R. W. Erickson, "Fundamentals of Power Electronics," Springer-Verlag, NewYork, 1997.
- B. Choi and B. Cho, "Intermediate line filter design to meet both impedance compatibility and EMI specifications," IEEE Transactions on Power Electronics, Vol. 10, No. 5, pp.583-588, Sep. 1995. https://doi.org/10.1109/63.406846
- B. Choi, D. Kim, D. Lee, S. Choi, and J. Sun, "Analysis of input filter interactions in switching power converters," IEEE Transactions on Power Electronics, Vol. 22, No. 2, pp. 452-460, Mar. 2007. https://doi.org/10.1109/TPEL.2006.889925
- M. Nave, "Power Line Filter Design for Switched Mode Power Supplies," Van Nostrand, New York, 1991.
- R.Vimala, K.Baskaran, K.R.Aravind Britto, "Determination of Maximum and Minimum Possible CM and DM Noise Impedances," International journal of Electronics & Telecommunication and Instrumentation Engineering, Vol. 1, No. 1, pp. 24-31, March 2010.
- Input System Instability Application Note PQ-00-05-1 Rev. 01, [Online] Available:http://www.synqor.com/support/3_1_app_notes.htm, 2004.
- R.Vimala, K.Baskaran, N.Devarajan, "Modeling and Filter Analysis of Differential Mode EMI for Switching Power Converters," European Journal of Scientific Research, Vol. 52, No.4, pp.553-568, April 2011.
- R.Vimala, K.Baskaran, K.R.Aravind Britto, "Modeling of Conducted EMI in Switching Power Converters using Equivalent Circuit Model," International Journal of Electrical Engineering, Vol. 4, No. 1, pp. 59-74, April 2011.
Cited by
- A ZCT Double-Ended Flyback Converter with Low EMI vol.15, pp.3, 2015, https://doi.org/10.6113/JPE.2015.15.3.602
- Modelling and measurement of high-frequency conducted electromagnetic interference in DC–DC converters vol.11, pp.4, 2017, https://doi.org/10.1049/iet-smt.2016.0412