• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.379-389
• /
• 1988

In this paper, an algorithm for obtaining 2-state switching failure function and a terminal pair reliability evaluation method in a communication network are proposed. The communication network is modeled by a graph. By using the sequence of matrix transformations for the graph, minimal cut-set matrix representing all minimal cut-sets which completely interrupt the communication path is determined and 2-state switching failure function is then obtained from the minimal cut-set matrix. The terminal pari reliability of the communication network is evaluated by corresponding the random variables to 2-state switching failure function. Illustrative examples are provided to demonstrate the algorithm. A computer program evaluating the terminal pair reliability in a complex and large network has also been developed.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.336-339
• /
• 1990

This paper discusses the application of VSCS(Variable Structure Control System) to position control of a trapezoidal type brushless DC motor. In order to simplify the overall control system and to improve the robustness, a new switching function which is composed of linear combination of only measurable state variables Sr(x) and Sr(x) is defined. The proposed new switching function is implemented using a digital signal processor(DSP). A general PWM amplifier is replaced by an ON-OFF pattern generator for the hardware simplification and digitalization. Experimental results are given to demonstrate the validity of the proposed control method.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2018

Recently, the nine-switch inverter has been proposed as a dual output inverter. To date, studies on the control strategies for NSIs have been mostly combined with their application. However, in this paper, a mathematical model and control strategy for nine-switch inverters has been proposed in view of the topology. A switching function model and equivalent circuit model of a nine-switch inverter have been built in ${\alpha}{\beta}$ coordinates. Then, a novel current observer with an improved integrator is proposed based on the switching function model, and a direct power control strategy is proposed. No current sensors are used in the proposed strategy, and only two voltage sensors are employed. The performance of the proposed control method is verified by simulation and experimental results.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.537-542
• /
• 1998

Logic functions such as fuzzy switching functions and multiple-valued Kleenean functions, that are models of Kleene algebra have been studied as foundation of fuzzy logic. This paper deals with a new kinds of functions-fuzzy switching functions with constants-which have features of both the above two kinds of functions . In this paper, we propose new canonical forms for enumerating them. They are much useful to estimate simply the number of fuzzy switching functions with constants.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.609-617
• /
• 2006

A new fuzzy c-regression algorithm for switching regression analysis is presented, which combines fuzzy c-means clustering and least squares support vector machine. This algorithm can detect outliers in switching regression models while yielding the simultaneous estimates of the associated parameters together with a fuzzy c-partitions of data. It can be employed for the model-free nonlinear regression which does not assume the underlying form of the regression function. We illustrate the new approach with some numerical examples that show how it can be used to fit switching regression models to almost all types of mixed data.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.282-291
• /
• 2014

This paper presents a detailed theoretical analysis and performance assessment of the capacitor voltage balancing strategies for staircase modulated modular multilevel converters (MMC) in terms of the algorithm structures, voltage balancing effect, and switching frequency. A constant-frequency redundancy selection (CFRS) method with minimal switching loss is proposed and the function realization of specific modules of the algorithm is given. This method is simple and efficient in both switching frequency and regulation capacity. Laboratory results show very good agreement with the theoretical analysis and numerical simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.343-352
• /
• 1998

Higher frequency of energy transfer or at least energy conversion has to be used in order to reduce the size of inductors and capacitors required in the power supplies. Conventional PWM switching-mode power supplies have a limitation of operating frequency due to switching losses in the switching transistors and rectifier diodes. Means of reducing switching losses have been developed for high-frequency resonant amplifiers or more exactly dc/ac inverters. Because of smooth current and voltage waveforms resonant convertesrs havelower device switching losses and stresses lower electromagnetic interference(EMI) and lower noise than PWM converters. Therefore in this paper design equations of Classs E resonant low dv/dt rectifier with a series resonant capacitor drived using Fourier series techniques. The theory is compared with simulation results obtained for the rectifier operating at 10[MHz] ac input and 5[V] coutput.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.351-359
• /
• 2007

In this study, a hierarchical switching control scheme based on robust control theory is proposed for tracking control of vehicle longitudinal acceleration in the presence of large uncertainties. A model set consisting of four multiplicative-uncertainty models is set up, and its corresponding controller set is designed by the LMI approach, which can ensures the robust performance of the closed loop system under arbitray switching. Based on the model set and the controller set, a switching index function by estimating the system gain of the uncertainties between the plant and the nominal model is designed to determine when and which controller should be switched into the closed loop. After theoretical analyses, experiments have also been carried out to validate the proposed control algorithm. The results show that the control system has good performance of robust stability and tracking ability in the presence of large uncertainties. The response time is smaller than 1.5s and the max tracking error is about $0.05\;m/S^2$ with the step input.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.51-63
• /
• 1995

In this paper, a new real-time optical image switching system based on the phase-typed BPEJTC is suggested. The phase filter mask which has the arbitrary position mapping function between input and output planes is constructed by using the modified JTPS of the BPEJTC. Then, the input image is convolved with this phase filter mask in the spatial frequency domain and through further Fourier transform the input image is switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switching system is opto-digitally constructed and through some experiments on image switching the possiblity of real-time implementation of the multiple optical image switching system by using the BPEJTC is suggeste.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.563-565
• /
• 2004

It is expected to reduce stresses to components of high voltage circuit breaker and transferred switching surge from power system by applying controlled switching technique to high voltage system. This technique has at ready been applied in advanced countries. In this paper, basic principle of controlled switching technique is set up and a device to realize this technique is under developing. Controlled switching device will be improved by applying a method minimizing errors of operating time and by adopting compensation function relative to changes of ambient/operating condition.