• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.555-556
• /
• 2007

This paper proposes a new concept's IDSFHA(Intelligent Digital Switchgear For Home Automation) which can obtain the safety, the reliability and the easy to correspond to the request of the general electric customer or electric power company under the ubiquitous-based home automation environments The IDSFHA is designed by analyzing their requirement functions, a 32-bit micro processor is adopted as main controller to support efficiently the designed functions. The single phase power IC(ADE7753) is utilized to collect the electric power information, and makes it possible to communicate as internet among the IDSFHA and their using the ethernet convertor. In the proposed IDSFHA, the several functions are implemented such as the earth leakage level display and waveform transmitting, the electric power using fee display, voltage management, load management and load control function. Finally, the prototype of the IDSFHA is made experimently based on the designed results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.319-320
• /
• 2007

We researched basic study about electrical characteristics of Zinc Selenide (Faraday Cell), which is known for various temperature of good-performance, that applied measuring current or protecting instrument by Optical Current Transducer, on Gas Insulated Switchgear. Measuring System consists of VCSEL produced 850nm IR Laser, Pin Photo Diode made of GaAs surveyed as Optical Power Meter, and Optical Fibers specified Multi-mode. We observed optical output changes during measurement of currents increasing by 100[A] in range from 0[A] to 1,000[A] and set temperature condition increasing by $5[^{\circ}C]$ in a range from $30[^{\circ}C]\;to\;60[^{\circ}C]$.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.594-597
• /
• 1993

With the increase of electric power demand in the downtown area. many problems, such as the difficulty in security of substation site and interference of the electromagnetic wave or damage to person due to outdoor type substation facilities has been occured. Therefore, the compaction of substation facilities is required and the gas insulated switchgear(GIS) has been adopted accordingly. However, much care should be taken of the interface problem between cable and GIS. This paper describes the failure analysis and a countmeasure for prevent ion from failure in the interface.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2038-2039
• /
• 2007

In this work, a novel semi-internal type UHF PD sensor has been proposed and related investigations has been performed in order to detect the partial discharges that could be possibly produced at the insulation system of the gas insulated switchgear(GIS). This sensor was designed to mount on the CT terminal hole of GIS using the spiral antenna theory. Therefore this type sensor can be install on GIS during the power apparatus has been operation and better sensitivity compare to the commercial external type UHF PD sensor.

• Proceedings of the KIEE Conference
• /
• 2006.07e
• /
• pp.39-40
• /
• 2006

가스절연개폐장치(GIS: Gas Insulated Switchgear) 내부에서 발생하는 UHF 부분방전 신호를 측정하고, 이를 주파수 분석을 통하여 1차 부분방전 진단을 수행하며, 주요 이상이 있을 경우 위상 분석을 통하여 7가지의 부분방전 패턴으로 분류하여 부분방전 원인을 진단할 수 있는 GIS 부분방전 진단 시스템을 국산화 개발하였다. 이에 본 논문에서는 주파수 분석방법, 부분방전 진단 패턴 및 모니터링 시스템에 대하여 기술한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.246-248
• /
• 2005

본 논문은 23kV 가스절연개폐기에서의 윤활제 고착시 발생되는 현상을 조사하였다. 내부 개폐접점부의 마찰저항을 줄이고 가동전극의 윤활한 동작을 위해 사용되는 그리스 (grease)를 과다하게 도포할 경우 고착과 함께 가동전극의 미끄럼운동에 영향을 주는 것이 확인되었다. 영향 평가로는 물성시험과 투 개방 음향특성을 분석하였다. 본 논문의 결과는 개폐장치의 제조품질 개선 및 정전감소에 기여할 것으로 사료된다.

• Journal of information and communication convergence engineering
• /
• v.21 no.4
• /
• pp.316-321
• /
• 2023

In this study, we developed a conversion core that produces power by utilizing the unused magnetic field in a switchboard. The conversion core makes it possible to utilize power that is normally wasted. The conversion core is composed of a core, filter, and battery. A prototype was installed in a switchboard to conduct tests on the output, battery storage, and output boosting of multiple batteries. Energy was harvested from the magnetic field generated by a busbar of the switchboard, and the power conversion ratio of the core yielded 1.08-1.01 mW per 1 A of bus current. Supplying this technology to the market after further R&D and commercialization is expected to greatly assist in the dissemination of energy harvesting, which has not yet spread widely to the general public.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.378-379
• /
• 2012

Nowadays, great energy consumption in advanced electrical industry has called up the great y efficiency. Electric power IT industry such as intelligent electric power system is receiving great attention and being marked up as a new growth engine. Through Intelligent electric power system, the electric power supply can be balance optimized according to demand, giving huge cost savings advantage for energy imports, infrastructure construction and operation. Nevertheless, the intelligent system promotes better reliability in power supply. Manual electric power management using man power appears to be non-practical. Real time electric power management on all facilities and equipment can be done through an intelligent electric power system, any accident break out issue can be easily recorded and recognized. In this paper, a fully integrated intelligent switchgear electric management system is developed to monitor and remote control the electrical switch based on smart phone. The proposed system is superior than the existing switchgear management system's weakness and can sharply improve effectiveness and stability with low cost. In future, the proposed system is expected to be greatly contributed to the advancement of the IT industry in electric power management.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.291-295
• /
• 2011

A bake-out process using auto switchgear for five days was performed to evaluate the reduction effect of the concentration of volatile organic compounds (VOCs) and formaldehyde in a newly-built elementary school gymnasium. Reduction rates of VOCs were observed as followings: 38.2, 64.2, 86.3, 80.2, and 71.5% for benzene, toluene, ethylbenzene, xylene, and styrene, respectively, which satisfies the indoor air quality standards of newly-built apartment houses in Korea. The reduction rate of total VOCs and formaldehyde were 67.0 and 24.7%, respectively. Those results proved that the bake-out process using auto switchgear was effective for reducing indoor air pollutants.

• Proceedings of the KIEE Conference
• /
• 2005.05b
• /
• pp.2-3
• /
• 2005

국내 전기설비진단연구회에서 GIS 고장을 예방할 목적으로 고안한 예방진단 기술지도 초안을 바탕으로하여 결함의 종류와 진단기술의 종류, 년도별 기술 개발 목표, 기술지도 등을 제시하였다.