• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.374-377
• /
• 2003

In this paper, a performance evaluation model of the Fat-Tree network with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem in the switch network The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. Steady state probability concept is used to simplify the analyzing processes. Two important parameters of the network performance, throughput and delay, are then evaluated. To validate the proposed analysis model, the simulation is carried out on the various sizes of Fat-tree networks that use the multiple a$\times$b buffered crossbar switches. It is observed that both analysis and simulation results are match closely.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.197-205
• /
• 1996

Four types of three-waveguide optical switches are analyzed by measns of the coupled mode theory. Assuming that three proximate waveguides of an optical switch are identical and equally spaced, we examine the switching behavior for both cases where an incident beam is launched into 1) the outer waveguide, 2) the center waveguide. For each beam-launching case, switching voltage is applied so that three waveguides refractive indices be detuned 1) symmetric, 2) anti-symmetric. It is concluded that only three types of optical switches out of four an perform the switching operation. We derive the switching conditions for ach of three possible types and draw the corresponding switching diagrams.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.209-221
• /
• 1997

This paper presents a soft switching unity power factor PWM rectifier, which features reduced conduction losses and soft switching with no auxiliary switches. The soft switching are achieved by using a simple commutation circuit with no auxiliary switches, and reduced conduction loses are achieved by employing a single converter, instead of a typical front end diode rectifier followed by a boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and major characteristics analysis and experimental results of the new converter also included.

• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.145-150
• /
• 2011

In this paper, we designed a tunable microstrip patch antenna using RF MEMS switches. The design and simulation of the antenna were performed using a high frequency structure simulator(HFSS). The antenna was designed for use in the ISM band and either operates at 2.4 GHz or 5.7 GHz achieving -10 dB return-loss bandwidths of 20 MHz and 180 MHz, respectively. In order to obtain high efficiency and improve the ease of integration, a high resistivity silicon(HRS) wafer on a glass substrate was used for the antenna. The antenna achieved high gains: 8 dB at 5.7 GHz and 1 dB at 2.4 GHz. The RF MEMS DC contact switches were simulated and analyzed using ANSYS software.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.375-381
• /
• 1998

Zero Voltage Switched (ZVS) Pulse Width Modulation (P~마1) converter which operates a fixed frequency is proposed in this paper. The main switches of the converter are always switched at zero voltage, and the auxiliaη switches are s softly switched, The voltage and current stresses of the switches are minimized as low as in conventional PWM converters, The suggested buck typed converter is analyzed. designed for a battery charger. The designed characteristics are experimentally verified by the results of the buck type converter.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.755-760
• /
• 2003

A novel current-fed energy-recovery sustaining driver (CFERSD) for a PDP is proposed in this paper. Its main idea is to recover the energy stored in the PDP or to inject the input source energy to the PDP by using the current source built-up in the energy recovery inductor. This method provides zero-voltage-switching (ZVS) of all main power switches, the reduction of EMI, and more improved operational voltage margins with the aid of the discharge current compensation. In addition, since the current flowing through the energy recovery inductor can compensate the plasma discharge current flowing through the conducting power switches, the current stress through all main power switches can be considerably reduced. Furthermore, it features a low conduction loss and fast transient time. Operations, features and design considerations are presented and verified experimentally on a 1020X106mm sized PDP, 50kHz-switching frequency, and sustaining voltage 140V based prototype.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.328-333
• /
• 2011

A Distribution Automation System (DAS) is operated by monitoring and control of the field statesusing Feeder Remote Terminal Units (FRTUs) installed together withautomatic switches.An optimal placement of automatic switchescan enhanceefficiencyof the operation and restoration, and improve the power supply reliability ofa DAS.This paper proposes an algorithm to decide the optimal placement of automatic switches ina DAS.The proposed algorithm was developed ona DAS witha six sections and three links configuration. The proposed algorithm was provided inaneight-feeder power distribution system.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.213-215
• /
• 2002

This paper presents grid connected photovoltaic inverter system using a new Zero-Current-Transition(ZCT) technique. The main switches of the proposed grid connected inverter are turned off under the zero current condition by operating the auxiliary circuit and also all semiconductor devices, switches and diodes, are applied to low rated voltage regardless of the load condition. In additionally, the proposed ZCT scheme has advantages, which are without the additional current stresses and the conduction losses on the main switches during the resonance period of the auxiliary circuit. The simulation was performed to verify the validity of the proposed grid connected photovoltaic ZCT inverter system.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.173-178
• /
• 2015

In lieu of the excellent radio frequency (RF) performance of microelectromechanical system ( MEMS) switches, these micro switches need higher actuation voltage for their operation. This requirement is secondary to concerns over the swtiches’ reliability. This paper reports high reliability operation of RF MEMS switches with low voltage requirements. The proposed switch is optimised to perform in the Q-band, which results in actuation voltage of just 16.4 V. The mechanical stress gradient in the thin micro membrane is computed by simulating von Mises stress in a multi-physics environment that results in 90.4 MPa stress. The computed spring constant for the membrane is 3.02 N/m. The switch results in excellent RF performance with simulated isolation of above 38 dB, insertion loss of less than 0.35 dB and return loss of above 30 dB in the Q-band.

• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.321-328
• /
• 2013

In this paper, we present a technique for obtaining conflict-free schedules for real-time automation protocol for industrial Ethernet (RAPIEnet) switches. Mathematical model of the switch is obtained using graph theory. Initially network traffic entry and exit parts in a single RAPIEnet switch are identified, so that a bipartite conflict graph can be constructed. The obtained conflict graph is transformed to three kinds of matrices to be used as inputs for our simulation model, and selection of any of the matrix forms is application-specific. A greedy edge-coloring algorithm is used to schedule the network traffic and to solve the minimum coloring problem. After scheduling, empty slots are identified for forwarding the non real-time traffic of asynchronous devices. Finally, an algorithm for synchronizing the schedules of adjacent switches is proposed using edge-contraction and minors. All simulations were carried out using Matlab.