• The Journal of Korea Robotics Society
• /
• v.4 no.2
• /
• pp.155-162
• /
• 2009

A main distributing frame(MDF) is an interface unit that is used to connect office equipment cables in a telephone company to subscriber cables. Until now, there is no automated switching system for MDFs in Korea. Manual handling of an MDF has some drawbacks; It is time-consuming, very cumbersome, and expensive. It also makes maintenance hard. An automated main distributing frame system is proposed and commercialized in Japan. In that system, a robot gripper inserts connecting pins into the cross point holes of a matrix board, which reveals several disadvantages in the aspects of space, maintenance, fault tolerance, and economical efficiency. This paper describes a newly developed robotic switch board system for MDFs. In the developed system, switches are placed at the cross point of a matrix board. There is one robot in between two switch units, so one robot deals with two switch units. In the system, positioning the robot, opening and closing switches can be done by using only a pair of motors and a pair of solenoids. The newly developed system is compact in size, reduces cost, and shows high reliability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.131-143
• /
• 1996

In this paper, we propose the improved structure of fully interconnected ATM Switch to develop the small sized switch element and represent practical implementation of switch network. As the part II of the full study about structure and implementation of fully interconnected ATM Switch, this paper especially describes the implementation of an ATM switching element with 8 input port and 8 output port at 155 Mbits/sec each. The single board switching element is used as a basic switching block in a small sized ATm switch for ATM LAN Hub and customer access node. This switch has dedicated bus in 12 bit width(8 bit data + 4 bit control signal) at each input and output port, bit addressing and cell filtering scheme. In this paper, we propose a practical switch architecture with fully interconnected buses to implement a small-sized switch and to provide multicast function withoutany difficulty. The design of switching element has become feasible using advanced CMOS technology and Embedded Gate Array technology. And, we also represent Application Specific Integrated Circuit(ASIC) of Switch Output Multiplexing Unit(SOMU) and 12 layered Printed Circuit Board for interconnection network of switch.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.113-122
• /
• 2001

Several guidelines can be developed for a satellite-based ATM switch. One of the most important of these is that the switch must provide a requirement for CLRs on the order of 10-10 to meet the QoS of high- performance traffic and avoid costly retransmissions. In this paper, the proposed approach shows not only the better traffic performance but also requires the little switching elements and buffers compared with original Knockout switch and other scheduling algorithm. As a result, the complexity becomes reduced. Simulation results indicate that proposed approach shows excellent cell loss ratio compared with existing switch architecture. Also, iii performance can be approached to the cell loss ratio, which is requirement for the satellite system, as window size increases. An(1 it shows thats low complexity is induced. Therefore, the proposed approach is appropriate for satellite on-board ATM switch architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.378-385
• /
• 2016

The internal circuit of the bus-bar for an electrical switch board is a prime cause of electric shock and short circuit accidents due to the exposure of live parts. Electrical fires can also be caused by animals and foreign substances in the switchboard that connect the components with a difficult structure resulting in overheating due to an increase in contact resistance. Preventing these types of accidents is a prime concern in the manufacturing process, such as cutting and bending. In this study, the cutting bus bar of a switch board contained improved modules as a flame retardant that isolates a separate blocks to prevent such problems. This was implemented as a scalable and flexible means of reducing electrical switchboard hazards to offer a safe switch board bus-bar structure of a new connecter type

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.136-145
• /
• 2000

The objective of this study is to evaluate the human performance relating to the layouts of the two different hand switch types with two and three buttons in the nuclear power plants. Using a computer simulation, the cognitive performance for the hand switch layouts was measured on the basis of response and task completion times. Comparative analyses were performed with three different layouts representing the current switch arrangements in the Yonggwang nuclear plants 5 and 6 and Ulchin 3 and 4, respectively. Statistical analyses revealed that the performance of the two-buttoned switch layouts was found to be better than those of the three-buttoned switch. Furthermore, the superiority of the two-buttoned switch type is consistent regardless of various layout types. These results imply that the difference of the cognitive performance can be attributable to the switch types rather than to the switch layouts. Therefore, from the cognitive perspective, the two-buttoned switch type is recommended for future power nuclear plants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5201-5206
• /
• 2014

A 'Light switch remote control' was made with an android smartphone and a smart light switch, which can use wireless communication on this paper. A smart light switch uses an embedded board and Bluetooth communication to receive and transmit data, and it receives and sends data again with a smartphone and wireless communication. This study used the flexibility of sensors that could be added later to utilize the embedded board as a gateway. This skill is being serviced now in a new apartment and building. On the other hand, existing households that do not support this skill can use it if they change only the switch. In conclusion, this system ensured user convenience and flexibility of system.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.397-398
• /
• 2013

Fairchild Green Mode off line buck switch for low standby power consumption and high reliability is presented. By reducing operating current and optimizing switching frequency, 20mW power consumption is achieved. High performance trans-conductance amplifier and green mode function improve the ripple and regulation in the output voltage. The conventional $FPS^{TM}$ buck and novel Fairchild buck switch are compared to show the improvement of performance. Experimental results are showed using 2W evaluation board.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.53-58
• /
• 2008

In this study, we fabricated embedded IC (Double Pole Double throw switch chip) polymer substrate and evaluate it for 2.4 GHz WiFi application. The switch chips were laminated using FR4 and ABF(Ajinomoto build up film) as dielectric layer. The embedded DPDT chip substrate were interconnected by laser via and Cu pattern plating process. DSC(Differenntial Scanning Calorimetry) analysis and SEM image was employed to calculate the amount of curing and examine surface roughness for optimization of chip embedding process. ABF showed maximum peel strength with Cu layer when the procuring was $80\sim90%$ completed and DPDT chip was laminated in a polymer substrate without void. An embedded chip substrate and wire-bonded chip on substrate were designed and fabricated. The characteristics of two modules were measured by s-parameters (S11; return loss and S21; insertion loss). Insertion loss is less than 0.55 dB in two presented embedded chip board and wire-bonded chip board. Return loss of an embedded chip board is better than 25 dB up to 6 GHz frequency range, whereas return loss of wire-bonding chip board is worse than 20 dB above 2.4 GHz frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1065-1071
• /
• 2009

Satellite application services can be divided into realtime services like voice communications and non-real time services like traditional data communications. To support both types of services on the same On-Board Switching(OBS), a scheduler which depends on their service classes is required. A fixed priority scheduling policy has a starvation problem. In this paper we propose a scheduling scheme based on premium and age. Premium is a fixed value which is given to a certain class of services. Age is another parameter of the scheduling policy and it will be increased by one for every scheduling cycle. The scheme we propose chooses a packet which has the largest sum of its age and premium. Simulation results indicate that the proposed approach shows better performance in both average cell delay and std-dev of cell delay for the lower class of service. There is no staying in infinite starvation state.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1298-1305
• /
• 2016

This paper presents the development of a short-circuit protection mechanism on a high voltage switch (HVS) board which is built by a series connection of semiconductor switches. The HVS board is able to quickly detect and limit the peak fault current before the signal board triggers off a gate signal. Voltage clamping techniques are used to safely turn off the short-circuit current and to prevent overvoltage of the series-connected switches. The selection method of the main devices and the development of the HVS board are described in detail. Experimental results have demonstrated that the HVS board is capable of withstanding a short-circuit current at a rated voltage of 10kV without a di/dt slowing down inductor. The corresponding short-circuit current is restricted to 125 A within 100 ns and can safely turn off within 120 ns.