• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.23-28
• /
• 2007

In this paper, we propose ATM switch structure including AAL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of AAL cells which consist of AAL type 1, AAL type 2, AAL type 3/4, and AAL type 5 cells. We propose two switch fabric methods; One supports the AAL type 2 cell processing per input port, the other global AAL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a strong point for easy implementation and extensibility. The proposed ATM switch fabric architecture is applicable to mobile communication, narrow band services over ATM network.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.45-56
• /
• 2004

In this paper, we propose ATM switch architecture including ALL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of m cells which consist of ALL type 1. ALL type 2, ALL type 3/4 and ALL type 5 cells. We propose two switch fabric methods; One supports the ALL type 2 cell processing per input port, the other global ALL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a merit for easy implementation and extensibility. In this paper, the AAL Type 2 switch module which adapts the former method is designed using VHDL language and implemented in FPGA chip. The designed AAL Type 2 switch module operates at 52MHz. The proposed ATM switch fabric is widely applicable to mobile communication, narrow band services over ATM network and wireless ATM as well as general ATM switching fabric.

• Journal of Power Electronics
• /
• v.6 no.4
• /
• pp.356-365
• /
• 2006

This paper presents an improved three-phase PFC power rectifier with a three-phase diode rectifier cascaded four-switch boost converter. Its operating principle contains the operating principle of two conventional three-phase PFC power rectifiers: one switch boost converter type and a two switch boost converter type. The operating characteristics of the four switch boost converter type three-phase PFC power rectifier are evaluated from a practical point of view, being compared with one switch boost converter type and two switch boost converter topologies.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.966-968
• /
• 2005

Generally the high-voltage and high-current making switch is used to test the short-circuit test. The making switch should be operated always same speed/time and kept electrical-mechanical characteristic. There are spring charge type, hydro-pneumatic type and compressed air type etc. according to operation method of making switch contacts. Especially the making switch contacts of hydro-pneumatic type are moved by actuator and accumulator. To keep same speed/time of contacts and characteristic of making switch, actuator and accumulator should be worked always uniformly. So the dynamic analysis of actuator and accumulator of hydro-pneumatic type making switch will be helpful to maintain and design.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.489-497
• /
• 2022

This work investigates the commutation characteristics of the current flowing through an electrical-contact-type switch to the semiconductor switch branch during the breaking operation of hybrid DC switchgear. A simple, reliable, low-cost natural commutation method is proposed, and the current commutation characteristics are analyzed in accordance with the conduction voltage drop of the semiconductor switch branch through experiments. A prototype 400 V/10 A class natural commutation type hybrid DC switchgear is set up. Its performance is verified, and its characteristics are analyzed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.9
• /
• pp.24-29
• /
• 2000

As a result of the continuing increase in the high capacity and high speed requirement, ATM will be important technology. But previous AAL type cant support service that is variable length, low speed. So AAL2 is the most recently standardized AAL type, which is aimed at providing for the bandwidth efficient transmission of low-rate, short, and variable length packets in delay-sensitive applications. In this paper, we propose the architecture and the behavior of scalable AAL2 switch that are far different from ATM switch. Also, the performance of the designed switch is analyzed by computer simulation.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.408-413
• /
• 2002

We demonstrated a polarization dependent type 2$\times$2 optical switch, using a binary reflection type SLM. Reflection type FLC was used as a half wave retardation plate. Two inputs were controlled by each SLM for the desired output direction. In conclusion, in the "1" state the average optical loss was 6.6 ㏈, and in the "0" state the average optical loss was 14.6 ㏈, and measured the switching speed as 75 $mutextrm{s}$. By using this method, a polarization dependent type 2$\times$2 optical switch can be demonstrated and the possibility of a 4-port WDM optical switch also verified.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1157-1165
• /
• 2014

The T-type topology is a three-level topology that has an advantage in terms of its number of switching device and its efficiency when compared to the neutral-point clamped (NPC)-type topology. With the recent increase in the usage of the T-type topology, the interest in its reliability has also increased. Therefore, a tolerance control for a T-type rectifier is necessary to improve the reliability of applications when an open-switch fault occurs. NPC-type rectifiers cannot eliminate input current distortion completely. However, the T-type rectifier is able to restore distorted current. In this paper, a tolerance control for the $S_{x2}$ and $S_{x3}$ open-switch faults of a T-type rectifier is proposed where it is advantageous in terms of efficiency when compared with other tolerance controls. The performance of the proposed tolerance control is verified through simulation and experimental results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.136-145
• /
• 2000

The objective of this study is to evaluate the human performance relating to the layouts of the two different hand switch types with two and three buttons in the nuclear power plants. Using a computer simulation, the cognitive performance for the hand switch layouts was measured on the basis of response and task completion times. Comparative analyses were performed with three different layouts representing the current switch arrangements in the Yonggwang nuclear plants 5 and 6 and Ulchin 3 and 4, respectively. Statistical analyses revealed that the performance of the two-buttoned switch layouts was found to be better than those of the three-buttoned switch. Furthermore, the superiority of the two-buttoned switch type is consistent regardless of various layout types. These results imply that the difference of the cognitive performance can be attributable to the switch types rather than to the switch layouts. Therefore, from the cognitive perspective, the two-buttoned switch type is recommended for future power nuclear plants.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.209-216
• /
• 2003

In this paper, we propose ATM switch structure including AAL type 2 switch which can efficiently transmit low-bit rate data, even if the network has many endpoints. We simulate the architecture of ATM switch fabric that is modeled in computer program and analyze the performance according to offered loads. ATM switch proposed in this paper can support cell switching for all types of AAL cells which consist of AAL type 1, AAL type 2, AAL type 3/4, and AAL type 5 cells. We propose two switch fabric methods; One supports the AAL type 2 cell processing per input port, the other global AAL type 2 cell processing for every input port. The simulation results show that the latter is superior to the former. But the former has a merit for easy implementation and extensibility. The proposed ATM switch fabric is widely applicable to mobile communication, narrow band services over ATM network and wireless ATM as well as general ATM switching fabric.