• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.809-812
• /
• 2002

This paper presents the structures for a CPW shunt RF switch using MEMS(Micro Electro Mechanical System). Recent development in MEMS technology has made the design and fabrication of micro-mechanical switches as new switching elements. The micro-mechanical switches have low insertion loss, negligible power consumption, and good isolation compared to semiconductor switches. The fabricated structure shows an insertion loss of 2dB at 20GHz When a bias voltages of 12V is apply.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.85-88
• /
• 2001

This paper suggests an improved switch architecture for the rechargeable battery protection IC. In the existing protection IC, charging and discharging switches composed of the CMOS transistor and the diode are external components. It is difficult to integrate the switches in a CMOS process due to the large chip-size overhead and inevitable parasitic effects. In this paper, we propose a new switch architecture of the MOSFET's 'diode connection' method. The performance and chip-size overhead are proved to be adequate for the fully integrated protection IC.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.113-116
• /
• 1999

This paper presents a hardware architecture of AAL(ATM Adaptation Layer) type 2 switch. The proposed architecture can assign and configure maximum AAL2 CID limit. AAL2 is the protocol which has been recommended by ITU-T and ATM-Forum for low bit rate delay sensitive services. The architecture assumes 155 Mbps STM-1/STS-3c physical interface, maximum VCC can be 64K connections. It can support maximum 16,384M AAL2 connections. For efficient use of peripheral memory, a concept of segment address was proposed. The proposed AAL2 switch hardware architecture can be used in ATM network as a standalone server or embedded module in a ATM switching system.

• 대한전자공학회논문지TC
• /
• 제38권12호
• /
• pp.58-66
• /
• 2001

입력큐방식의 교환기는 간결하며 고속교환을 위한 효과적인 교환방법이나 입력 측의 큐에서 발생하는 HOL-블로킹(HOL-Blocking)은 패킷들의 대기시간을 크게 증가시켜 전체 시스템의 효율을 58%로 제한한다. 이를 해결하는 방법은 별도의 스케줄러(scheduler, contention controller)를 두어 블로킹의 방지 및 높은 처리율을 얻고 있다. 대부분의 스케줄러의 구현은 중앙집중방식으로 구현되는데 이는 다양한 교환기의 구성을 어렵게 한다. 본 논문에서는 입력포트별로 간단하면서 분산된 형태의 스케줄러를 소개하고 모의실험을 통하여 성능을 검증한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.383-386
• /
• 2001

This paper presents a novel multicast architecture for shared multibuffer ATM switch, which is tailored for throughput enhancement in multicast environments. The address queues for multicast cells are separated from those for unicast cells to arbitrate multicast cells independently from unicast cells. Three read cycles are carried out during each cell slot and multicast cells have chances to be read from shared buffer memory(SBM) in the third read cycle provided that the shared memory is not accessed to read a unicast cell. In this architecture, maximum two cells are queued at each fabric output port per time slot and output mask choose only one cell. Extensive simulations are carried out and it shows that the proposed architecture has enhanced throughput comparing with other multicast schemes in shared multibuffer switch architecture.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.82-89
• /
• 2014

The industrial products to use single phase inverter are raised the necessity of power quality improvement, such as AC Motor Driver, Lighting, Renewable energy power converter. Also, it is increasing that applied the single phase multilevel inverter for high quality power at renewable energy power converter. Especially, the photovoltaic multilevel inverters have at least more than two DC_Link and more than one DC/DC Converter. This paper proposes a triple output DC/DC Converter with one switch for photovoltaic multilevel inverter. The proposed converter has advantages of low cost and volume because it has one switch. The operation principle of the converter is analyzed and verified. A prototype is implemented to verify of the proposed converter.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.644-651
• /
• 2001

The purpose of this study is to develop the improvement method of MOV(Motor Operated Valve) operability without major modification or change of MOV which needs a great expense and manpower. We studied valve stem lubrication, stem packing thrust and actuator control switch which could give an major effect to MOV operability, and found the some consequences. First, the stem/stem-nut friction coefficient and stem factor is significantly effected by stem lubrication state. Second, the measured packing thrust value is appeared higer than the design value for tested valves and the preparation of optimal value selection criteria is needed. Finally, optimization of MOV control switch is another major factor for MOV operability and structual integrity.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.326-329
• /
• 2002

In this paper, a single-phase inverter using a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is presented. The current control algorithm is analyzed about how to design the circuit with auxiliary switch which can ZVT operation for the main power switch. The simulation and experimental results would be shown to verify the proposed current algorithm, because the main power switch is turn on with ZVT and the hi-directional inverter is operated.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.10-15
• /
• 2011

In this paper, a new soft switching three phase inverter with a quasi-resonant dc-link is presented. The proposed inverter has a dc-link switch and an auxiliary switch. The inverter switches are turned on and off under zero voltage switching condition and all auxiliary circuit switches and diodes are also soft switched. The control utilizes PWM and the auxiliary switch does not require an isolated gate drive circuit. In this paper, the operation analysis and design considerations of the proposed soft switching inverter are discussed. The presented experimental results of a realized prototype confirm the theoretical analysis.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1372-1381
• /
• 2017

This paper presents a high-side switch driver IC capable of improving the current sensing accuracy and providing reverse battery protection. Power semiconductor switches used to replace relay switches are encumbered by two disadvantages: they are prone to current sensing errors and they require additional external protection circuits for reverse battery protection. The proposed IC integrates a gate driver and current sensing blocks, thus compensating for these two disadvantages with a single IC. A p-sub-based 90-V $0.13-{\mu}m$ bipolar-CMOS-DMOS (BCD) process is used for the design and fabrication of the proposed IC. The current sensing accuracy (error ${\leq}{\pm}5%$ in the range of 0.1 A-6.5 A) and the reverse battery protection features of the proposed IC were experimentally tested and verified.