• 중소기업융합학회논문지
• /
• 제6권2호
• /
• pp.31-36
• /
• 2016

Sniffing은 공격자가 암호화 되지 않은 패킷들을 수집하여 순서대로 재조합 하고난 후 공격 대상의 개인정보, 계좌정보 등 중요 정보를 유출하기 위한 수동적 형태의 공격이다. Sniffing 공격으로 인해 패킷들이 유출되는 것을 방지하기 위해 기존의 방법들을 살펴보고, 효율적인 방어대책을 제시하였다. Sniffing공격은 공격 대상의 근거리 네트워크를 Promiscuous Mode을 이용해 조작한 후 필터링을 해제하고 패킷을 훔치는 방식으로 작동한다. 공격의 형태로 Switch Jamming, Port mirroring, ARP Redirect, ICMP Redirect 공격 등이 있다. 제안하는 공격 대응 방법으로는 SSL을 통한 패킷의 암호화, 스위칭 환경의 네트워크 구성 관리, DNS를 이용하는 방법과 decoy방법을 이용하면 안전한 통신이 가능할 것으로 기대하며, 더 효율적이며 안전한 ICT 연구에 기여한다. 향후 프로토타입 프로토콜을 통하여 효율성을 증명하는 것은 향후 연구로 진행할 예정이다.

• 한국재료학회지
• /
• 제12권4호
• /
• pp.254-258
• /
• 2002

To realize channel cross-connecting in optical communications systems, a high speed optical matrix switch was fabricated using z-cut $LiNbO_3$. For switch fabrication was design bending structure and coupling length and four $2{\times}2$ directional couplers were integrated on one substrate far construction of a $4{\times}4$ switch. Single-mode optical waveguides were formed by Ti-diffusion at a wet $O_2$ atmosphere. Ti-diffusion profile, refractive index variation and waveguide morphology were analyzed by Prism coupler and optical microscopy, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1123-1125
• /
• 2002

In this paper, interleaved boost converter is applied as a pre-regulator in switch mode power supply. Interleaved Boost Power Factor Preregulator (IBPFP) can reduce input current ripple as a simple voltage control loop only without inner current loop, because input current is divided each 50% by two switching devices. IBPFP can be classified as three cases from duty ratio condition in continuous current mode and be carried out state space averaging small signal modeling. According to modeling, the PID controller is applied and voltage control loop is constructed for suitable design condition. From frequency domain analysis, it is verified that control system is satisfied with design condition of switch mode power supply.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.87-93
• /
• 1997

An electro-optic polymer digital optical switch with a coupling region modified for optimum mode coupling is proposed, and it is analyzed by using the beam propagation method combined with the effective index method. Its modified coupling region is adiabatically introduced along the propagation direction from the branching point of the two waveguides. The structure of the modified coupling region and its refractive index profiles are designed to optimize the mode coupling in the Y-branch waveguide. Therefor, the switching performance of the device may be enhanced with a fixed device length. It is confirmed from the numerical calculation that the drive voltage is reduced by more than 30 percents and te crosstalk is improved by about 8dB.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.559-562
• /
• 2000

The problem of noise generation due to PWM switched-mode power converter has been widely noticed from the viewpoint of Electromagnetic Interference(EMI). Many kings of topologies for resonant converters have been developed both to overcome this noise problem and to attain high power efficiency. It is reported in references that resonant converters which are derived from PWM converter using resonant switch show much lower noise characteristics than PWM converter, and that current-mode resonant converter is more sensitive to stored charge in rectifying diode than voltage-mode counterpart concerning surge generation at diode’s turn-off. On the other hand, above mentioned resonant converters have defect of high-voltage stress on semiconductor switch and complicated circuit configuration. Hence, the simplified Forward-type resonant converter has been proposed and investigated due to its prominent features of simplicity of circuit configuration, low voltage stress and high stability. However, its noise characteristics still remain unknown. The purpose of this paper is to study quantitatively the noise characteristics of this simplified Forward-type resonant converter by experiment and analysis. The influence of parasitic elements and stored charge in rectifying diode on noise generation has been clarified.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
• /
• pp.326-328
• /
• 1998

본 논문에서는 다양한 통신망을 통합 관리하기위해 ISO 및 ITU-T에서 권고하고 있는 CMIP기반의 TMN체계를 따른 ATM/B-ISDN망 관리에 있어서 에이전트 플랫폼위에 개발된 GUI 기반의 관리 객체 개발환경(MODE)을 이용한다. MODE를 이용하여 ATM스위치 관리를 위한 GDMO(Guidelines For DEFINITION of Managed Object) source를 입력받아 관리 객체 생성 구현 방법을 제시한다. MODE는 크게 GDMO Compiler, SDC Development, Database(DB)로 구성된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.273-276
• /
• 1998

This paper proposes a new Asynchronous Transfer Mode(ATM) switch architecture for the Broadband ISDN. The proposed switch has the architecture to prohibit the out-of-sequence in shared buffer switch system with being fixed buffer size in the out-buffered large scale ATM Switch System. then in this paper proposes cell resequence algorithm to decrease the out-of-sequence problem. also, we studied the out-of-sequence problem that was occurred by the cell transfer delay and the cell overflow due to the fixed buffer size when cell resequenced and we propose to implement optimal ACFIFO(Address Counter First In First Out) buffer size which has the minimized cell loss.

• Journal of Power Electronics
• /
• 제7권4호
• /
• pp.318-327
• /
• 2007

The design and performance analysis of a power factor corrected (PFC), single-phase, single switch flyback buck-boost ac-dc converter is carried out for low power battery charging applications. The proposed configuration of the flyback buck-boost ac-dc converter consists of only one switch and operates in discontinuous current mode (DCM), resulting in simplicity in design and manufacturing and reduction in input current total harmonic distortion (THD). The design procedure of the flyback buck-boost ac-dc converter is presented for the battery charging application. To verify and investigate the design and performance, a simulation study of the flyback buck-boost converter in DCM is performed using the PSIM6.0 platform. A laboratory prototype of the proposed single switch flyback buck-boost ac-dc converter is developed and test results are presented to validate the design and developed model of the system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국지능시스템학회 2008년도 춘계학술대회 학술발표회 논문집
• /
• pp.247-250
• /
• 2008

최근 무선통신용 LSI는 배터리 수명과 관련하여, 저전력 동작이 중요시되고 있다. 따라서 Digital CMOS 신호처리와 더불어 동작 가능한 SI (Switched-Current) circuit를 이용하는 Current-mode 신호처리가 주목받고 있다. 그러나 SI circuit의 기본인 Current Memory는 Charge Injection에 의한 Clock Feedthrough라는 문제점을 갖고 있기 때문에, 전류 전달에 있어서 오차를 발생시킨다. 본 논문에서는 Current Memory의 문제점인 Clock Feedthrough의 해결방안으로 CMOS Switch의 연결을 검토하였고, 0.25${\mu}m$ CMOS process에서 Memory MOS와 CMOS Switch의 Width의 관계는 simulation 결과를 통하여 확인하였으며, MOS transistor의 관계를 분명히 하여, 설게의 지침을 제공한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.854-857
• /
• 2009

The concept of a microplasma current switch for a device operated in a current mode like organic light-emitting diodes, which features matrix addressability and current switching, is presented as well as its architecture and operational principle. To verify the concept, we have fabricated a 100 mm ${\times}$ 100 mm microplasma current switch panel with a cell pitch of $1080{\mu}m{\times}1080{\mu}m$. Moreover, the current-voltage measurements of the unit cell are performed for three different driving voltage amplitudes. They show the characteristic of an asymmetric floating double probe diagnosing plasmas.