• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.36-46
• /
• 2001

This study was to find a way of reusing wood and plastic wastes, which considered as a troublesome problem to be solved in this age of mass production and consumption, in manufacturing wood fiber-polypropylene fiber composite panel. And the feasibility of this composite panel as a substitute for existing headliner base panel of automobile was also discussed, especially based on physical and mechanical performance. Nonwoven web composite panels were made from wood fiber and polypropylene fiber formulations of 50 : 50, 60 : 40, and 70 : 30, based on oven-dry weight, with densities of 0.4, 0.5, 0.6, and 0.7 g/$cm^3$. At the same density levels, control fiberboards were also manufactured for performance comparison with the composite panels. Their physical and mechanical properties were tested according to ASTM D 1037-93. To elucidate thickness swelling mechanism of composite panel through the observation of morphological change of internal structures, the specimens before and after thickness swelling test by 24-hour immersion in water were used in scanning electron microscopy. Test results in this study showed that nonwoven web composite panel from wood fibers and polypropylene fibers had superior physical and mechanical properties to control fiberboard. In the physical properties of composite panel, dimensional stability improved as the content of polypropylene fiber increased, and the formulation of wood fiber and polypropylene fiber was considered to be a significant factor in the physical properties. Water absorption decreased but thickness swelling slightly increased with the increase of panel density. In the mechanical properties of composite panel, the bending modulus of rupture (MOR) and modulus of elasticity (MOE) appeared to improve with the increase of panel density under all the tested conditions of dry, heated, and wet. The formulation of wood fiber and polypropylene fiber was considered not to be a significant factor in the mechanical properties. All the bending MOR values under the dry, heated, and wet conditions met the requirements in the existing headliner base panel of resin felt.

• 임산에너지
• /
• 제21권2호
• /
• pp.10-16
• /
• 2002

소나무, 낙엽송 및 잣나무 간벌재를 재료로 가압압력과 열압시간을 달리하여 톱밥 보드를 제조하고, 이들이 보드의 물성에 미치는 영향을 조사하였다. 두께 팽창율과 흡수율은 열압시간이 증가함에 따라 감소하였으며, 휨강도와 경도는 열압시간이 증가함에 따라 증가하였다. 톱밥보드의 물성은 가압압력 보다 열압시간에 의해 영향을 받음을 알 수 있었고, 수종간 비교에서는 뚜렷한 경향을 발견 할 수 없었다.

• 한국작물학회지
• /
• 제46권5호
• /
• pp.360-366
• /
• 2001

Flour physicochemical properties of six Korean waxy wheat lines and their parental plants, including Kanto 107 and BaiHuo, which have partially null in GBSS (granule bound starch synthase), were evaluated in this study. The very low amylose content (3.20%) of Korean waxy wheat lines, which had been influenced by the null in all three GBSS isoforms encoded by three Wx loci, could result in the higher starch swelling power (25.15%), lower starch and flour pasting temperature (61.37$^{\circ}C$; 65.85$^{\circ}C$), and higher starch pasting peak viscosity and breakdown (246.60 RVU; 161.50 RVU) than those of their parental plants. In addition to high swelling and pasting properties, Korean waxy wheat lines had the higher protein content (12.80%), alkaline water retention capacity (97.39%), SDS sedimentation volume (80.33 $m\ell$) and damaged starch content (4.35 %) than those of their parental plants.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.40-55
• /
• 2005

This study was carried out to discuss the feasibility of wood and plastic wastes as the raw materials for wood particle-plastic composites. For this purpose, composites were manufactured from coarse and fine wood particles and polypropylene fibers by nonwoven web process. And the effect of wood particle size on the performance of the composites were analyzed according to ASTM D 1037-93. In the physical properties of composites, water absorption decreased with the increase of target density and polypropylene fiber content. And the composites with fine wood particles appeared to have slightly lower water absorption than those with coarse wood particles. Thickness swelling did not vary significantly with the increase of target density but increased with the increase of wood particle content. And the composites with fine wood particles were significantly lower in thickness swelling than those with coarse wood particles. In the mechanical properties of composites, dry and wet MOR showed the increasing tendency with the increase of polypropylene fiber content and target density. Dry and wet MOE showed the increasing tendency with the increase of target density but only wet MOE exhibited the increasing tendency with the increase of polypropylene fiber content. Composites with fine wood particles appeared to be generally higher in wet MOR and MOE than those with coarse wood particles. In conclusion, composites with fine wood particles showed generally higher performance than those with coarse ones. Also, composites were significantly superior to control particleboards in the performance, especially in water absorption and thickness swelling.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.265-273
• /
• 2015

In this work, the emulsified asphalt with high phase stability and storage stability was prepared by using phase inversion emulsification and the surfactant mixed with cationic and nonionic surfactants. It was found that the asphalt together with Span 20, nonionic surfactant and DDA (Dimethyl Dodecyl Amine), cationic surfactant showed the most stable phase. The phase stability of the emulsified asphalt, therefore, was investigated through the particle size with mixed surfactant content, rheology behavior and Zeta potential value; the particle size decreased with the increase of the mixed surfactant content but the viscosity increased. The shear thinning behaviors and the Zeta potential value with 50 mV~60 mV were shown, which was found to be considered stable. In addition, SBR latex(Styrene-butadiene-rubber) and water dispersed Epoxy (EPD) were used to enhance the physical properties of the emulsified asphalt. The swelling and adhesion features of the emulsified asphalt were also studied with $CaCO_3$, Silica, and Montmorillonite (MMT). It was shown that the addition of SBR latex and MMT can be another way to improve the physical properties of the emulsified asphalt in that the lowest swelling feature was found.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• 자원환경지질
• /
• 제20권3호
• /
• pp.159-168
• /
• 1987

Some physico-chemical properties such as surface area, moisture content, cation exchange capacity, swelling rate, pH, viscosity and liquid limit have been determined for evaluation of Cabentonite deposit occurring in four localities; Yonil, Gampo, Haseo and Pohang, in Gyeongsang-do. Montmorillonite contents can be derived from surface area measurement. Enhancement of liquid limit values and swelling volume were observed in the samples which had higher exchangeable Na ion and finer particle-size distribution. Identical results were observed even in the Na-exchanged samples. This suggests that aggregation effects have a great influence on physico-chemical properties. Aggregation of montmorillonite were controlled not only burial depth but also composition of exchangeable cation. Consequently, sample occurred in Yonil area where has the greatest burial depth in the area show somewhat lower physico-chemical properties than those of samples occurred in the other localities. However, the basic test applied in this study provides very useful preliminary information relating to its commercial potential.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.118-123
• /
• 2009

In order to find out the effect of low level of starch acetylation on physicochemical properties of potato starch, amylose content, digestibility of raw and gelatinized starch, thermal properties, pasting properties, and the swelling power of native and acetylated potato starches were measured. The amylose content was significantly lower in acetylated starch than in their counterpart native starches. Though a tendency in the decrease in digestibility of raw starch was observed with starch acetylation, acetylation did not alter the proportion of readily digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) of both raw and gelatinized potato starches. No clear increase in the swelling power was observed, however, the peak and onset gelatinization temperatures and the enthalpy required for starch gelatinization decreased with starch acetylation. Peak and breakdown viscosities were reduced due to acetylation of potato starch while final viscosity and set back were increased.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.17-23
• /
• 2005

Juvenile and transitional-juvenile wood samples from loblolly pine (Pinus taeda) were immersed in water to investigate longitudinal and tangential swelling properties. Increment cores from twenty-six loblolly pine trees were sampled at breast height (1.37 m). Earlywood rings 5 and 9 were separated from the core, extracted, oven-dried and immersed in water at room temperature. The variance in longitudinal swell was significant for ring 5 compared to ring 9 (p = 0.001). It was found that tangential swell might predict longitudinal swelling of juvenile wood at ring 9 but not at ring 5. Poor correlation in ring 5 suggests that swelling response in younger juvenile wood may differ. The swell response at ring 5 did not follow the shrinkage models discussed in the literature while ring 9 adhered to the expected curve.

• 폴리머
• /
• 제38권5호
• /
• pp.588-595
• /
• 2014

A semi-interpenetrating polymer network (semi-IPN) hydrogel composed of crosslinked chitosan and poly (acrylic acid-co-crotonic acid) was prepared in the presence of glutaraldehyde (GA) as a crosslinker. Fourier-transform infrared, thermogravimetric analysis and scanning electron microscopy were employed to confirm the structure of the semi-IPN hydrogel. The swelling capacity of hydrogel was shown to be affected by the monomers weight ratio, chitosan content, initiator and GA concentrations. The results also indicated that the semi-IPN hydrogel had different swelling capacity at various pHs. Additionally, the swelling behavior of the hydrogel was investigated in aqueous solutions of NaCl, $CaCl_2$, and $AlCl_3$.