• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.22-29
• /
• 2004

As a result of high integration of semiconductor device, the global planarization of multi-layer structures is necessary. So the chemical mechanical polishing(CMP) is widely applied to manufacturing the dielectric layer and metal line in the semiconductor device. CMP process is under influence of polisher, pad, slurry, and process itself, etc. In comparison with the general CMP which uses the slurry including abrasives, fixed abrasive pad takes advantage of planarity, resulting from decreasing pattern selectivity and defects such as dishing & erosion due to the reduction of abrasive concentration especially. This paper introduces the manufacturing technique of fixed abrasive pad using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. And the tungsten CMP using fixed abrasive pad achieved the good conclusion in terms of the removal rate, non-uniformity, surface roughness, material selectivity, micro-scratch free contemporary with the pad life-time.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.70-75
• /
• 1985

The influence of polyethylene glycol derivatives on heparin release from cylindrical monolithic type silicone segment devices was examined in physical saline solution. This water-soluble carrier caused the devices to absorb the water in aqueous media. The release rate of heparin from the devices was increased as molecular weight of polyethylene glycol was increased. Water soluble carrier incorporated into silitone segment devices permits controlled release of heparin that otherwise would be released extremly slowly from the polymer. Heparin released from the silicone segment containing polyethylene glycol showed the first-order kinetics. Without changing the release-pattern, the release rate of heparin could be controlled by varing molecular weight of polyethylene glycol, the water-soluble carrier and depleting polyethylene glycol on the outlayer of devices. The mechanism of release probably showed the creation of pore or microdomine through the devices secondary to the swelling.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.379-383
• /
• 1997

To study the effect of amylose on the mechanism of gel formation, swelling power, water solubility, the pattern of alkali gelatinization and gel properties were investigated. The swelling power of waxy maize starch (Amioca) was the highest and followed by those of PFP > Amaizo > Amylomaize VII. Amioca showed higher iodine affinity of soluble amylose than other maize starches. The apparent viscosity of alkali gelatinization measured by Brookfield viscometer for Amaizo was 70${\times}$10$^3$cp which was higher than Amylomaize VII. The apparent viscosity of PFP was increased to 70${\times}$10$^3$cp and then decreased. As maize starches were autoclaved at 121$^{\circ}C$ with starch: water ratio (1 : 9) and autoclaving-cooling cycle were up to 4 times, gel properties were measured by rheometer. Amaizo showed the highest value for hardness, adhesiveness, springiness, and cohesiveness, and hardness of gel after two cycles of autoclaving-cooling was the highest. Gel properties seemed to be affected by the chain length of amylose rather than the content of amylose.

• Applied Biological Chemistry
• /
• v.25 no.4
• /
• pp.218-223
• /
• 1982

Physicochemical properties and aging of chestnut, Castanea cretana(Eungi), starch were investigated. The starch granules were irregular oval shape with the ratio of short and long axis of 1 : 1.4 and the size of $2.9-21.4{\mu}$ (average $10\;{\mu})$). The starch showed a typical B-type X-type diffraction pattern. Amylose content and water binding capacity were 22.7% and 81.5%, respectively. The optical transmittance of 0.1% starch suspension increased rapidly from $55^{\circ}C$. The swelling power of the starch repidly increased betwen $55^{\circ}C$ and $60^{\circ}C$, and its increase slowed down thereafter. Amylograms of starch at 5% and 6% concentrations indicated that the starch was stable against heat and shear force. The viscosity at 6% concentration was over twice higher than that at lower concentration. The time constant(reciprocal of rate constant) for 45% starch gel stored at $21^{\circ}C$ was 1.68 days.

• The Korean Journal of Physiology and Pharmacology
• /
• v.15 no.6
• /
• pp.363-369
• /
• 2011

The present study elucidated the effect of the selective inducible nitric oxide synthase (iNOS) inhibitor $N^6$-(1-iminoethyl)-L-lysine (L-NIL) on monosodium urate (MSU) crystal-induced inflammation and edema in mice feet. L-NIL (5 or 10 mg/kg/day) was administered intraperitoneally 4 h before injection of MSU (4 mg) into the soles of mice hindlimb feet. Twenty-four hours after MSU injection, foot thickness was increased by 160% and L-NIL pretreatment reduced food pad swelling in a dose dependent manner. Pretreatment of 10 mg/kg/day L-NIL significantly suppressed the foot pad swelling by MSU. Plasma level of nitric oxide (NO) metabolites and gene expression and protein level of iNOS in feet were increased by MSU, which was suppressed by L-NIL pretreatment. Similar pattern of change was observed in nitrotyrosine level. MSU increased the gene expression of tumor necrosis factor (TNF)-${\alpha}$ and interleukin (IL)-$1{\beta}$ and L-NIL pretreatment suppressed MSU-induced cytokines expression. The mRNA levels of superoxide dismutase and glutathione peroxidase1 were increased by MSU and L-NIL pretreatment normalized the gene expression. Phosphorylation of extracellular signal-regulated kinase 1/2 and p38 was increased by MSU, which was suppressed by L-NIL pretreatment. The mRNA levels of iNOS, TNF-${\alpha}$, and IL-$1{\beta}$ were increased by MSU in human dermal fibroblasts, C2C12 myoblasts, and human fetal osteoblasts in vitro, which was attenuated by L-NIL in a dose dependent manner. This study shows that L-NIL inhibits MSU-induced inflammation and edema in mice feet suggesting that iNOS might be involved in MSU-induced inflammation.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.461-467
• /
• 1993

The purpose of this study was to investigate the physico-chemical properties of potato starch heated with microwave. Two types of potato starches are prepared; in group A raw potato starch was heated with microwave and in group B potato starch was isolated from potato heated with microwave. Both groups were exposed to the microwave energy in a 560 W, 2,450 MHz oven for 60, 120, 180 and 300 seconds. As the microwave heating time took longer, free lipid decreased and bound lipid increased in both groups. The shape of starch granules, birefrigence and X-ray diffraction pattern were not changed much by microwave heating in both groups. Water binding capacity increased, but amylose content, swelling power and solubility decreased as the microwave heating time took longer. It was also found that the extent of decreases in swelling power and solubility were different between group A and group B.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.169-182
• /
• 2014

High-performance research reactors require fuel that operates at high specific power to high fission density, but at relatively low temperatures. Research reactor fuels are designed for efficient heat rejection, and are composed of assemblies of thin-plates clad in aluminum alloy. The development of low-enriched fuels to replace high-enriched fuels for these reactors requires a substantially increased uranium density in the fuel to offset the decrease in enrichment. Very few fuel phases have been identified that have the required combination of very-high uranium density and stable fuel behavior at high burnup. U-Mo alloys represent the best known tradeoff in these properties. Testing of aluminum matrix U-Mo aluminum matrix dispersion fuel revealed a pattern of breakaway swelling behavior at intermediate burnup, related to the formation of a molybdenum stabilized high aluminum intermetallic phase that forms during irradiation. In the case of monolithic fuel, this issue was addressed by eliminating, as much as possible, the interfacial area between U-Mo and aluminum. Based on scoping irradiation test data, a fuel plate system composed of solid U-10Mo fuel meat, a zirconium diffusion barrier, and Al6061 cladding was selected for development. Developmental testing of this fuel system indicates that it meets core criteria for fuel qualification, including stable and predictable swelling behavior, mechanical integrity to high burnup, and geometric stability. In addition, the fuel exhibits robust behavior during power-cooling mismatch events under irradiation at high power.

• Proceedings of the SOHE Conference
• /
• 1997.12a
• /
• pp.45-49
• /
• 1997

To study the effect of amylose on the mechanism of gel formation, swelling power, water solubility, the pattern of alkali gelatinization and gel properties were investigated. The swelling power of waxy maize starch(Amioca) was the highest and followed by those of PFP ＞Amaizo ＞ Amylomaize Ⅶ. Amioca showed higher iodine affinity of soluble amylose than other maize starches. The apparent viscosity of alkali gelatinization measured by Brookfield viscometer for Amaizo was $70{\pm}10^3cp$ which was higher than Amylomaize VII. The apparent viscosity of PFP was increased to $70{\pm}10^3cp$ and then decreased. As maize starches were autoclaved at $121^{\circ}C$ with starch : water ratio (1:9) and autoclaving-cooling cycle were up to 4 times, gel properties were measured by rheometer. Amaizo showed the highest value for hardness, adhesiveness, springiness, cohesiveness, and hardness of gel after two times of autoclaving-cooling cycles was the highest. Gel properties was thus affected by the chain length of amylose rather than amylose content.

• KSBB Journal
• /
• v.11 no.6
• /
• pp.676-680
• /
• 1996

The characteristics of controlled drug release were studied for a biodegradable drug delivery system. A biodegradable chitosan matrix was prepared after swelling chitosan with 10%-acetic acid and adding sulfadiazine. The release behavior of sulfadiazine from the chitosan matrix was studied using the Higuchi's diffusion controlled model in phosphate buffer solutions of pH 7.4 and pH 1.2. The drug release time was delayed by increasing the content of sulfadiazine. The drug release at pH 7.4 was more delayed than that at pH 1.2. The reason is that chitosan has greater swelling abilities at low pH than at high pH. The apparent release rate constant(K) increased as the concentration of drug increased. In shoat, the formulation the biodegradable chitosan matrix to suppress the burst effect of drug release mechanism, which led to a sustained release pattern.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.2
• /
• pp.21-32
• /
• 2011

The effects of high polymer on the seedling survival were investigated in three major turfgrasses. Twelve treatments were used in the study with different rates of sand, soil organic amendment (SOA), and water-swelling polymer (WSP). Turfgrass seedling survival rate was evaluated in creeping bentgrass (CB), Kentucky bluegrass (KB), and zoysiagrass (Zoy) grown under greenhouse conditions. Significant differences were observed among the treatments. Seedling survival rates were variable in CB, KB, and Zoy according to mixing rates of SOA and WSP, being maximum 20.2% in differences. At 6 weeks after seeding, the survival rates ranged from 0.6 to 61.9% in CB, 4.2 to 75.3% in KB and 1.7 to 82.1% in Zoy. A pattern of seedling emergence varied with time among treatments influenced by WSP rates. A proper mixing rate of WSP is considered to be 5% for CB and 5 to 10% for KB and Zoy. In general, overall effect of WSP on seedling survival was clearly observed in the mixtures of sand 80% and SOA 20% in CB. The best result, however, was found from the mixture of sand 85% and SOA 15% in both KB and Zoy. When mixing sand with WSP, a proper rate of SOA is considered to be 20% for CB and 15 to 20% for KB, while 10 to 15% for Zoy. A further research is needed to investigate the effects of WSP on the turf quality in mixtures of sand, SOA, and WSP before a field application.