• 폴리머
• /
• 제29권5호
• /
• pp.445-450
• /
• 2005

인체 보형물의 생체 재료로 사용할 목적으로 히아루론산 비드를 제조하였다. 히아루론산 수용액과 콩기름을 섞어서 얻어진 현탁상태에서 히아루론산을 1,3-butadiene diepoxide로 가교시켰다. 제조된 비드의 물성을 살펴보기 위해 직경, 표면적과 팽윤도를 측정하였고 전자현미경으로 표면상태를 관찰하였다. 가교제의 농도가 $5-12\;vol\%$ 범위에서 비드가 형성되었으며 제조된 비드는 단순분산성을 보였다. 히아루론산 농도 혹은 가교제 농도가 증가할수록, 가교 온도가 감소할수록, BET표면적과 팽윤도가 감소하였다. 혼합속도의 변화에 의해 비드의 물성은 거의 변하지 않았으나 비드의 크기는 효과적으로 조절되었다.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.67-72
• /
• 1988

Poly (HPMA/NVP) hydrogel was synthesized according to the composition and the con- centration of the crosslinking agent. The swelling degree of the P(HPMA/NVP) hydrogel decreased with increasing of P(HPMA) composition and crosslinking agent. The glass transi- tion and softening temperatures of the P(HPMA/NVP) increased with increasing of P(HPMA) composition. The composition of P(HPMA/NVP) : 70/30 and the concentration of the crosslin- king agent of 0.5 wt % gave the optimum condition in the application to the contact lens. There were also adequate in the mechanical, refractive properties and in vivo test in the P(HPMA/ NVP): 70/30 system.

• 공업화학
• /
• 제16권3호
• /
• pp.427-433
• /
• 2005

마이크로파를 이용한 인삼으로부터 가용성 성분을 추출할 때의 용매(에탄올-물) 사용량, 고체 입자크기, 마이크로파 전력의 영향과 용매-인삼 혼합물의 마이크로파 가열 특성 및 팽윤도에 대하여 검토하였다. 용매와 인삼의 비는 6 : 1(vol. of solvent to mass of ginseng)이 적당하였고 인삼 입자는 작을수록 추출률이 높았으나 슬러리를 여과하여 여분의 용매를 분리하기가 매우 곤란하였다. 마이크로파 전력은 세기가 클수록 추출 속도는 빨라지나 추출률은 투입되는 전체 에너지양에 영향 받는 것을 확인할 수 있었다. 마이크로파와 물중탕으로 가열한 인삼의 수분 흡수량으로부터 구한 질량기준 팽윤도는 마이크로파로 가열하였을 때 더 빠르게 일어났으며 이러한 결과가 마이크로파를 이용한 추출이 종래의 추출방법에 비하여 추출률이 높고 속도가 빨라지게 되는 요인일 것으로 판단되었다.

• 약학회지
• /
• 제36권3호
• /
• pp.212-219
• /
• 1992

Although oral route is the most convenient route for drug administration, the short and variable transit of drug through GI tract restricts the sustained drug absorption after oral administration. Thus, for sustained absorption of drugs, it is desirable to prolong the GI transit time by retaining the dosage forms in the stomach. In this study, the enzyme-digestible swelling hydrogel was synthesized by heating the mixed solution of N-vinyl-2-pyrrolidone[monomer], acrylated albumin[crosslinking agent] and proxyphylline[drug] at $65^{\circ}C$ for 10 hours in the cylindrical test tube. The resultant hydrogel tablet (diameter; 0.77 cm, thickness; 0.47 cm) was designed to swell in the gastric fluid after oral administration to such a size that passing through the pylorus could be inhibited during the drug release. After releasing drug, the hydrogel was expected to be degraded by pepsin, an enzyme in the stomach, and eventually solubilized. Actually, the hydrogel synthesized in the study swelled to a size larger than the diameter of the pylorus ($1.3{\pm}0.7$ cm) and slowly digested in the presence of pepsin. Drug release from the hydrogel was prolonged up to about 12 hours. The swelling kinetics was dependent on albumin acrylation time, drug content and gel thickness. Particularly the gel thickness was the most important factor that influences on drug release. By adjusting these factors, the albumin-crosslinked hydrogel was expected to be retained in the stomach for up to 60 hours and used as a potential platform of drugs for long-term GI absorption.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.30-37
• /
• 2005

The tensile properties, acetic acid solubility and degree of swelling in distilled water of cellulose/chitosan and sericin/chitosan film blended by mixing chitosan acetic acid solution with cellulose solution or sericin solution were investigated and the effect of crosslinking agent on solubility and degree of swelling were also considered. From the experimental results, the model of intermolecular bond is proposed. Tensile modulus of 100% cellulose film is high but the tensile strength and elongation are low. The elongation of 100% chitosan film is high but tensile modulus and strength is low. But it is possible to make film having same or higher tensile strength and modulus compared to that of 100% cellulose film by mixing cellulose and chitosan or by mixing sericin and chitosan. Chitosan is solved in 5vol % acetic acid solution but cellulose and sericin are not solved. Degree of swelling of chitosan in distilled water is higher than that of cellulose and sericin. Lower than 40wt% chitosan content, the solubility of cellulose/chitosan film in 5vol % acetic acid solution shows lower expected value but higher in case of sericin/chitosan film.

• 대한의용생체공학회:의공학회지
• /
• 제35권6호
• /
• pp.192-196
• /
• 2014

Collagen scaffolds were synthesized by cross linking into a solution mixture of 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochlorid(EDC) in ethanol, followed by pressing, cleaning and lyophilization process after the type I atelo-collagen solutions in D.I water(pH3). The experimental conditions are collagen concentration of 1.0 wt%, 3.0 wt%, 5.0 wt% and differential concentration of cross-linker. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the thickness and genotoxicity of the scaffolds. The scaffolds thickness pattern was regular to concentration of the degree of cross-linker and collagen. It was observed that the swelling ratio, the degree of crosslink, and the pore size(thickness of scaffold) can be controlled by adjusting the collagen, crosslinker. Among the parameters investigated, the smallest thickness can be achieved by collagen, crosslinker concentrate condition. The collagen scaffold is induced no genotoxicity. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by adding crosslink agent.

• 한국의류산업학회지
• /
• 제5권5호
• /
• pp.520-528
• /
• 2003

Chitosan was depolymerized by oxidizing agent, hydrogen peroxide ($H_2O_2$) and general properties of resulting low molecular weight chitosan(LMWC) were studied. Effect of amount of $H_2O_2$, ratio of $H_2O_2$/chitosan, and reaction temperature were investigated in preparing LMWC. In addition, the reduction of molecular weight of prepared LMWC were measured after a certain time passage. Pre-swelling treatment of starting chitosan affected uniform and mild reaction of depolymerization and increased the solubility of resulting LMWC. Prepared LMWC (Mw 100,000) showed a decrease in Mw by 25-35%. Prepared LMWC(Mw 60,000-70,000) showed a decrease in Mw by 10-15% after 7 months. Therefore, this depolymerizing process can be concluded desirable in terms of stability. In addition, yellowing of pre-swelling treated chitosan upon time passage was insignificant compared with that of untreated chitosan. Therefore, pre-swelling treatment of chitosan before depolymerization would be beneficial in terms of stability of physical state.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1274-1284
• /
• 2005

Effect of fixation methods and relaxation treatment on the dimensional stability and physical properties of MDPPA/HMM treated cotton knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of 4 kinds of cotton knitted fabric with MDPPA/HMM. Then these fabrics were washed 10 times. As a result, In swelling treatment on 10G showed relatively higher value of length shrinkage than 14G. Length and width shrinkage were increased by initial washing treatment and no further change was shown after 6 washing cycles. After 10 washing cycles, length and width shrinkage decreased. The KES standardized basic value of B/W, 2HB/W and bursting strength of interlock were relatively larger than those of single jersey. The values of B/W and 2HB/W of cotton knitted fabrics were increased by relaxation and washing treatment but were decreased by swelling treatment. In addition, the bursting strength of the cotton knitted fabrics was decreased after fusing, washing and relaxation treatment.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.217-231
• /
• 2018

Clayey soils with swelling and shrinkage characteristics have been major causes for many problems in roads, buildings and other civil engineering infrastructure in various areas of Pakistan, particularly where there are several patches of such soils on either side of Indus River. As the consistency characteristics are directly related with the variation of moisture content; therefore, this study was explicitly focused to investigate the effect of lime and wheat straw on the consistency characteristics of clayey soils with relatively high swelling and shrinkage characteristics. The consistency test results indicate that by the increase in lime content there is a decrease in the plasticity index of soil; for instance, 10% lime content resulted to 59% decrease in the plasticity index value. On the other hand; the addition of wheat straw resulted in a significant increase in the plasticity index; for instance, 10% wheat straw content resulted to a 120% increase in the plasticity index. This study has further shown that the shrinkage and swelling of clayey soils which resulting to several problems in the civil engineering infrastructures may adequately be managed through mixing an appropriate amount of lime and wheat straw as soil stabilizing agent for both immediate and long-term effects.

• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.298-305
• /
• 2010

본 연구에서는 목분 첨가된 폴리프로필렌 복합재의 수분흡수 특성에 목재수종, 화학조성분, 충진제 함량, 입자크기 및 상용화제의 첨가가 미치는 영향에 관해서 알아보았다. 500, 1,000, 1,500, 2,000, 2,500 및 3,000 시간 동안 물에 침지시킨 후, 상수리나무(Quercus accutisima Carr.)와 다릅나무(Maackia amuresis Rupr. et Maxim)는 낙엽송(Larix kaempferi Lamb.)에 비하여 훨씬 낮은 물흡수도를 보였다. 모든 수종에서 목분의 함량이 10 wt%로부터 50 wt%까지 증가할수록, 주어진 시간동안 물에 침지시켰을 때 복합재의 수분흡수율이 증가하 였다. 목분의 입자크기는 복합재의 수분흡수율에 큰 영향을 주는 것으로 나타났다. 상용화제의 첨가는 복합재의 수분흡수율을 낮추는데 아주 효과적이다. 가장 낮은 수분흡수율은 다릅나무 목분을 이용하고, 목분의 함량이 낮을수록, 목분의 입자크기가 작을수록, 그리고 상용화제를 첨가했을 때 얻을 수 있다. 복합재의 두께팽창은 수분흡수율과 아주 높은 상관관계를 가지고 있다.