• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.174-184
• /
• 2013

For the successful R&D and deployment of LED-based green energy lighting systems, the real-time power quality measurement of both various non-linear power signals including pulse waveform, spike waveform, etc and the undesired-signals including harmonics, sag, swell, etc is required. In this paper, we propose a low-cost power quality measurement (PQM) method for low- (60Hz-several KHz) to high-frequency (several tens KHz) power signals, which are generated by green-energy lighting systems, and implement a PQM testbed using TI TMS320F28335 MCU. The proposed algorithm is programmed using C in the CCS (Code Composer Studio) 3.3 environment and is verified using test signals generated by an arbitrary signal generator, NF-WF1974. In the implemented testbed, we can measure various non-linear current signals that LED SMPS generates, analyze harmonics by fast Fourier transform, and test sag, swell, and interruption using wavelet transform.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.2
• /
• pp.62-67
• /
• 2010

Swells occurred on the coast of the East Sea on February 24, 2008 caused a loss of three lives and also damaged several west coasts of Japan. The recent increase of swell intensity with number of accidents demands more accurate forecasting of swells in terms of time and location. The swells occurred in February 2008 are hindcasted using SWAN model to examine the accuracy of the model for future forecasting. The model results are compared with ReWW3 data as well as measurement wave data and specially, wave spectrum is analysed by comparing with observed spectrum at two wave stations located in the east coast of Korea. The SWAN model shows similar results with observation data in terms of significant wave heights and swell arrival time but the shapes of wave spectrum are different between model and in-situ measurement data. For further improvement of swell forecasting, more comparison and analysis with observed wave spectrum is necessary and wave directional spectrum data are required to study on the characteristics of swells in the East Sea.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.295-302
• /
• 2007

Abnormally high waves occurring at the east coast of korea were observed at five field measurement stations and their characteristics were analyzed with the use of wind data provided by the Korean Meteorological Administration. The high waves occurred because strong Donghae twister that was developed by extratropical cyclone blew while high swell arrived at the east coast of Korea. At Sokcho, the most northern site among the five measurement stations, maximum gust speed was 63.7 m/s and significant wave height reached at its maximum of 9.69 m with the corresponding peak wave period of 12.8 s. The reason for appearance of the abnormally high waves is that high swell continued while the twister blew strongly. Moreover, the wind direction was the same as the direction of swell propagation, which maximizes the increase of wave height due to superposition of swell and wind-generated waves. On the east coast of Korea, outbreak of this type of storm waves is very probable in winter season so that it is requested to establish a countermeasure of minimizing possible damage caused by the storm waves.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.145-151
• /
• 1995

The stretching of synthetic fibers by hot dry process is very difficult, because these fibers have high glass transition temperature at above $150^{\circ}C$. But, we used a swell-wet stretching precess; the fibers are stretched in a swelling agent such as organic solvents at lower temperature. In this study, 100% acryl fibers were uniaxially stretched with free width at $70^{\circ}C$ by swell-wet process in organic solvents. The stretchability was estimated by stretching work. This work is concerned with stretching stress and strain, and initial modulus. We found that it is a good parameter for the estimatation of high strength to the acrylic fiber. The effects of stretching conditions on the molecular orientation for high strength and mechanical properties of PAN fibers were measured.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.199-208
• /
• 2012

High-amplitude swell noises (HASN) are very difficult to eliminate from the marine seismic data. In this paper, we applied F-X filter and median filter in order to suppress HASN. Test data have been acquired on the northern offshore of the South Shetland Islands in December, 2010. Parts of data have been contaminated by HASN caused by bad weather during the cruise. We applied F-X filter and median filter to test data with HASN. After F-X filtering, most of non-coherent noises and small-amplitude swell noises are eliminated effectively but HASN are still remained significantly. With median filter, HASN was suppressed better than F-X filter, however some of non-coherent noises are still remains. We applied a cascade of two filters and results show HASN and non-coherent noises are suppressed effectively. After the cascade of two filtering, it is possible to define reflection layers clearly on the velocity spectrum and to produce better stacked section with a good signal-to-noise ratio.

• Journal of the korean society of oceanography
• /
• v.32 no.4
• /
• pp.163-170
• /
• 1997

Some CMP gathers acquired from shallow marine seismic reflection survey in offshore Korea do not show the hyperbolic trend of moveout. It originated from so-called swell effect of source and streamer, which are towed under rough sea surface during the data acquisition. The observed time deviations of NMO-corrected traces can be entirely ascribed to the swell effect. To correct these time deviations, a residual statics is introduced using Genetic Algorithms (GA) into the swell correction. A new class of global optimization methods known as GA has recently been developed in the field of Artificial Intelligence and has a resemblance with the genetic evolution of biological systems. The basic idea in using GA as an optimization method is to represent a population of possible solutions or models in a chromosome-type encoding and manipulate these encoded models through simulated reproduction, crossover and mutation. GA parameters used in this paper are as follows: population size Q=40, probability of multiple-point crossover P$_c$=0.6, linear relationship of mutation probability P$_m$ from 0.002 to 0.004, and gray code representation are adopted. The number of the model participating in tournament selection (nt) is 3, and the number of expected copies desired for the best population member in the scaling of fitness is 1.5. With above parameters, an optimization run was iterated for 101 generations. The combination of above parameters are found to be optimal for the convergence of the algorithm. The resulting reflection events in every NMO-corrected CMP gather show good alignment and enhanced quality stack section.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.223-230
• /
• 2006

Rubber compounds have a high viscoelastic property. One of the viscoelastic behaviors during profile extrusion is the swelling of extrudate, and the amount of swelling varies with operational conditions in extrusion. It is well recognized that the elastic portion in the viscoelastic property plays an important role in the extrudate swell. In this study computer simulation of the die swell at the capillary die for several rubber compounds has been performed using commercial CFD code, Polyflow. A non-linear differential viscoelastic model, Phan-Thien-Tanner (PTT) model, was used in the computer simulation. Non-isothermal behavior was considered in the calculation. Distribution of pressure, velocity and temperature in the reservoir and capillary die, and extrudate profiles were predicted through the simulation. The amount of the die swell fur the different rubber compounds was investigated for various flow rates and three types of length to diameter of the capillary die. It is concluded that the PTT model successfully represented viscoelastic behavior of rubber compounds.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.240-249
• /
• 2013

The seismic data quality of marine geological and engineering survey deteriorates because of the sea swell. We often conduct a marine survey when the swell height is about 1 ~ 2 m. The swell effect correction is required to enhance the horizontal continuity of seismic data and satisfy the resolution less than 1 m. We applied the swell correction to the 8 channel high-resolution airgun seismic data and 3.5 kHz subbottom profiler (SBP) data. The correct sea bottom detection is important for the swell correction. To detect the sea bottom, we used maximum amplitude of seismic signal around the expected sea bottom, and picked the first increasing point larger than threshold value related with the maximum amplitude. To find sea bottom easily in the case of the low quality data, we transformed the input data to envelope data or the cross-correlated data using the sea bottom wavelet. We averaged the picked sea bottom depths and calculated the correction values. The maximum correction of the airgun data was about 0.8 m and the maximum correction of two kinds of 3.5 kHz SBP data was 0.5 m and 2.0 m respectively. We enhanced the continuity of the subsurface layer and produced the high quality seismic section using the proper methods of swell correction.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.155-158
• /
• 2010

태양광전원이 연계되어 운용되고 있는 저압배전선로에 Sag, Swell 발생에 따른 태양광전원의 불안정한 운전과 태양광전원의 높은 왜형율의 Harmonic 발생에 따른 배전계통의 보호계전기(OCGR) 동작 등 전력 품질에 있어서 문제점이 발생되고 있다. 이러한 문제점은 사회적, 경제적 손실을 초래하게 되어, 전력품질(Sag, Swell, Harmonic, 모터기동)특성해석이 중요하다. 따라서 본 논문에서는 태양광전원이 연계되어 정상 운용 중인 배전계통에 대한 전력품질특성시험을 수행하기 위하여, 모의 배전계통장치와 모의 태양광전원장치, Labview용 감시제어장치로 구성한 태양광전원용 전력품질시험장치를 제작하였다. 이 시험장치를 이용하여 태양광전원 연계 시 Sag, Swell, Harmonic, 모터기동에 대한 시험을 수행하여 태양광전원이 배전계통에 미치는 영향과 특성을 분석하였다.

• Transactions of Materials Processing
• /
• v.12 no.1
• /
• pp.34-42
• /
• 2003

This paper presents a rigid-plastic finite element method to handle the frictional contact problem between two deformable bodies experiencing large deformation. The variational formulation combined with incremental quasi-static model is employed for treating the contact boundary condition. The frictional behavior of the model obeys Coulomb's law of friction. The proposed contact algorithms are classified into two categories, one for searching contacting nodes and the other for calculating contact forces at the contact surface. A slave node and master contact segment are defined using the geometric condition of finite elements on the contact interface. The penalty parameter is used to limit the penetration between contacting bodies, and the finite elements are coupled with contact boundary elements.us gates and cavity thicknesses. Through this study we have observed that the jetting is related to the die swell of material. This means that the jotting is strongly affected by the elastic flow property rather than the viscous flow property in viscoelastic characteristics of molten polymer. Different resins have different elastic properties, and elastic flow behavior depends on the shear rate of flow, i.e. injection speed. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mole design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting regardless of amount of elasticity of polymer melt.