• Clinics in Shoulder and Elbow
• /
• v.21 no.4
• /
• pp.246-251
• /
• 2018

Compared to single row repair, use of lateral row anchors in suture bridge rotator cuff repair enhances repair strength and increases footprint contact area. If a lateral knotless anchor (push-in design) is inserted into osteoporotic bone, pull-out of the lateral row anchor can developed. However, failures of lateral row anchors have been reported at several months after surgery. In our cases, even though complete cuff healing occurred, delayed pull-out of the lateral row anchor in the suture bridge repair occurred. In comparison to a conventional medial anchor, further biomechanical evaluation of the pull-out force, design, and insertion angle of the lateral anchor is needed in future studies. We report three cases with delayed pull-out of lateral row anchor in suture bridge rotator cuff repair with a literature review.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.82-89
• /
• 2008

Ideal rotator cuff repair is to maintain high fixation strength and minimize gap formation for optimizing the environment of biologic healing of tendon to bone. Among the current repair techniques, the suture bridge technique is superior to single- or double-row repair in ultimate load to failure, gap formation, restoring anatomical footprint and achieving pressurized contact area. The suture bridge technique also minimizes gap formation and has rotational and torsional resistances allowing early rehabilitation. However, despite superior biomechanical characteristics of the suture bridge technique, there is no evidence that these mechanical advantages result in better clinical outcomes. Furthermore, there is no difference in failure rates between the double-row repair and suture bridge techniques. An appropriate repair technique should be determined based on tear size and pattern and tendon quality.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.159-159
• /
• 2009

Repeated pulling-out of a suture anchor in the lateral row despite repeated attempts at insertion during a rotator cuff repair is not uncommon with the suture-bridge technique, especially in patients with osteoporosis. We describe a simple procedure for dealing with the pull-out of a PushLock anchor in the lateral row using a suture anchor with a suture eyelet during rotator cuff repair applying the suture-bridge technique.

• Clinics in Shoulder and Elbow
• /
• v.19 no.4
• /
• pp.237-240
• /
• 2016

Retear patterns after arthroscopic rotator cuff repair are classified into two patterns according to retear location. Type 1 is when the retear pattern occurs directly on the tendon at the bone repair site using the suture anchor repair method. Type 2 is when the retear pattern occurs at the musculocutaneous junction with a healed footprint in patients who undergo the suture bridge method. Here, the authors report another retear pattern, which was identified as a type 2 retear on magnetic resonance imaging in patients who had undergone arthroscopic rotator cuff repair by the suture-bridge technique. This pattern was different from the type 2 retear and occurred at the portion of the cuff away from the healed rotator cuff under the view of the arthroscope.

• Clinics in Shoulder and Elbow
• /
• v.17 no.3
• /
• pp.134-137
• /
• 2014

To report the fracture of proximal humerus in the lateral anchor site after suture bridge repair. A 57-year-old female patient with shoulder pain on the right-side was admitted through the emergency room following a car accident. Seven weeks before the accident, the patient had undergone surgery at a different hospital for the repair of supraspinatus tendon rupture on the right-side via suture bridge technique. Humerus surgical neck fracture was confirmed by X-ray, and proximal humerus fracture at the anchor site was confirmed by magnetic resonance imaging. Following 7 months of conservative treatment resulted in satisfactory bone union and motion of the shoulder joint. We report the need of close observation during and after the arthroscopic repair of the rotator cuff in patients with osteoporosis.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.162-162
• /
• 2009

After preparation of the bone bed, two doubly loaded suture anchors with suture eyelets are inserted at the articular margin of the greater tuberosity. A retrograde suture-passing instrument penetrates the rotator cuff to retrieve the sutures through the modiWed Neviaser or subclavian portal. An ipsilateral pair of suture eyelets in the suture anchor is passed through the margins of the rotator cuff tear. The blue suture of the second and third pair is pulled out of the lateral cannula, and the threaded blue suture of the third pair in the needle is passed through the blue suture of the second pair. After retrieving the blue suture of the firrst pair through the anterior portal, it is pulled out to pass the blue suture of the third pair through the eyelet of the anteromedial anchor. The blue suture is linked between two anchors. The medial row of suture bridge is repaired with a sliding knot, and the sutures are not cut. Once the rotator cuff repair using the suture-bridge technique has been performed, the two blue strands in the anterior portal are tied. We describe our technique that possesses the advantages of both the double-pulley and suturebridge techniques, which improves the pressurized contact area and maximizes compression along the medial row.

• Clinics in Shoulder and Elbow
• /
• v.18 no.4
• /
• pp.197-205
• /
• 2015

Background: The purpose of this study was to evaluate the postoperative magnetic resonance imaging (MRI) results of minimal-tying (one medial-row tie among 4 medial-row sutures) on the medial-row in double-row suture-bridge configuration ($2{\times}2$ anchor with $4{\times}4$ suture stands). Methods: From 2011 March to 2012 July, 79 patients underwent arthroscopic rotator cuff repair using $2{\times}2$ anchor double-row configuration. The mean age was 61.3 years (range, 31-81 years). Two double-loaded suture anchors were used for medial-row. Four medial-row stitches were made with only one medial-row knot-tying (the most anterior suture). Lateral-row was secured using the conventional suture-bridge anchor technique; all 4 strands were used for each anchor. Repair integrity was evaluated with MRI at mean 6.2 months postoperatively. Retear and the pattern of retear, change of fatty infiltration, and muscle atrophy of supraspinatus were evaluated using pre- and postoperative MRI. Results: Repaired tendon integrity was 38 for type I, 30 for type II, 6 for type III, 4 for type IV, and 1 for type V, according to Sugaya classification. Considering type IV/V as retear, the rate was 6.3% (5 out of 79 patients). Medial cuff failure was observed in 4 patients. Fatty atrophy of supraspinatus was significantly improved postoperatively according to Goutallier grading (p=0.01). The level of muscle atrophy of supraspinatus was not changed significantly after surgery. Conclusions: Minimal tying technique with suture configuration of four-by-four strand double-row suture-bridge yielded a lower retear rate (6.3%) in medium to large rotator cuff tears.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.210-210
• /
• 2009

For a bursal-side retracted laminated rotator cuff tear, simple repair of the retracted bursal-side rotator cuff might be insufficient because the repaired tendon could remain as an intratendinous tear of the rotator cuff. We present a repair method for intratendinous rotator cuff tears using the suture-bridge technique. We believe that this method helps to preserve the remnant rotator cuff tendon without tissue damage and restores the normal rotator cuff footprint in bursal-side delaminated rotator cuff tears.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.178-178
• /
• 2008

In order to improve static stability and healing of reattached labrum, we combined the advantages of suture bridge and transosseous technique. Using the conventional 3 portal for anterior instability, check stability of bony Bankart and preparation of glenoid bed in 3 way including removal, reshaping or mobilization of bony fragment. Two anchors were inserted to the superior and inferior portion and medial edge of bony Bankart lesion. It usually corresponded to the area of IGHL. Medial mattress sutures were applied around IGHL complex to get enough depth of glenoid coverage using suture hook. Make 3.5mm pushlock anchor hole to the articular edge of glenoid cartilage. Proximal suture bridge was applied at first and then distal suture bridge was inserted to mobilize the labrum in proximal direction. These construction can provide more stable labral repair with wide contact and compression in case of deficient bony stability. It not only avoids technical disadvantage of point contact with anchor fixation, but also decreasing gap formation through cross compression of labrum that couldn't gain even with the transosseous fixation which affords linear compression effect. Additional bony stability could be gained if the the bony fragment was mobilized to the glenoid margin with potential healing bed or reshaped for the good contact with reattached labrum.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.147-152
• /
• 2008