• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.262-268
• /
• 2017

The energy consumption of buildings is approximately 20.5% of the total energy consumption, and the interest in energy efficiency and low consumption of the building is increasing. Several studies have performed energy analysis and evaluation. Energy analysis and evaluation are effective when applied in the initial design phase. In the initial design phase, however, the energy performance is evaluated using general level information, such as glazing area and surface area. Therefore, the evaluation results of the detailed design stage, which is based on the drawings, including detailed information of the materials and facilities, will be different. Thus far, most studies have reported the analysis and evaluation at the detailed design stage, where detailed information about the materials installed in the building becomes clear. Therefore, it is possible to improve the accuracy of the energy environment analysis if the energy environment information generated during the life cycle of the building can be established and accurate information can be provided in the analysis at the initial design stage using a probability / statistical method. On the other hand, historical data on energy use has not been established in Korea. Therefore, this study performed energy environment analysis to construct the energy environment historical data. As a result of the research, information classification system, information model, and service model for acquiring and providing energy environment information that can be used for building lifecycle information of buildings are presented and used as the basic data. The results can be utilized in the historical data management system so that the reliability of analysis can be improved by supplementing the input information at the initial design stage. If the historical data is stacked, it can be used as learning data in methods, such as probability / statistics or artificial intelligence for energy environment analysis in the initial design stage.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.47-65
• /
• 2020

With the era of the Fourth Industrial Revolution in sight, innovative business models utilizing new technologies are emerging, and startups are enjoying an abundance of opportunities based on the agility to respond to disruptive innovations and the opening to new technologies. However, what is most important in creating a sustainable start-up ecosystem is not the start-up itself, but the process of research-start-investment-investment-the leap to listing and big business-in order to build a virtuous circle of startups that leads to re-investment. To this end, the environment created in the hub area where start-ups were conducted is important, and these material and non-material environmental factors are described as being inclusive by the word "entrepreneurial ecosystem." This study aims to provide implications for Korea's entrepreneurial ecosystem through the study of the interaction of the elements that make up the start-up ecosystem and the relationship of ecosystem participants in Singapore. Singapore has been consistently mentioned as the top two Asian countries in assessing the start-up environment and business environment. In this process, six elements of the entrepreneurial ecosystem presented by Isenberg(2010)-policies, finance, culture, support, human resources, and market-are the best frameworks for analyzing entrepreneurial ecosystems in terms of well encompassing prior studies related to entrepreneurial ecosystem elements, and a model of regional transformation is formed focusing on some elements to suit Singapore, the target area of study. By considering that Singapore's political nature would inevitably have a huge impact on finance, Smart Nation policy was having an impact on university education related to entrepreneurship, and that the entrepreneurial networks and global connectivity formed within Singapore's start-up infrastructure had a significant impact on Singapore's start-up's performance, researches needed to look more at the factors of policy, culture and market. In addition, qualitative research of participants in the entrepreneurial ecosystem was essential to understand the internal interaction of the elements of the start-up ecosystem, so the semi-structured survey was conducted by visiting the site. As such, this study examined the status of the local entrepreneurial ecosystem based on qualitative research focused on policies, culture and market elements of Singapore's start-up ecosystem, and intended to provide implications for regulations related to start-ups, the role of universities and start-up infrastructure through comparison with Korea. This could contribute not only to the future research of the start-up ecosystem, but also to the creation of a start-up infrastructure, boosting the start-up ecosystem, and the establishment of the orientation of the start-up education in universities.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.163-174
• /
• 2006

The purpose this study is to discuss effects of product design innovations on small and medium enterprises' business accomplishments and further on raising those enterprises' international competitiveness through reviewing previous studies that quantitatively analyzed economic and technological performance and ripple effects of products developed through design innovations. To determine how much design innovations are influential and contributing to small and medium enterprises' international competitiveness, then, the researcher took most advantage of statistical data from quantitative analyses of business accomplishments brought by design innovation development and investment, or economic effects like sales and exports increase. Results of the study can be summarized as follows. First, product design innovations by small and medium enterprises directly contribute to creating plenty of technological and economical achievements, for example, improved product quality, increased product profitability, the effect of product differentiation, improved price competitiveness and increased business sales and exports. Second, technological and economic achievements brought by product design innovations can directly lead to ripple effects like accumulating related knowledge and know-hows, strengthening the competitiveness of products, improving corporate image, increasing business sales and net profit, and meeting many different consumer requirements. Third, technological and economic achievements and ripple effects brought by product design innovations all become very important factors and sources on which small and medium enterprises strengthen their international competitiveness in world markets and maintain their sustainable competitive advantage. Fourth, business accomplishments or economic effects brought by design innovations can be quantitatively measured and analyzed with statistical data. Additional data from the moves can help understand and express the very value or nature of design in a quantitative way. This study is significant in that its results was made based on statistical data from empirical, objective measurements and quantification. The researcher hopes that the study contributes to promoting design innovations by small and medium enterprises and helps CEOs of those businesses better understand the very value and nature of design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.26-39
• /
• 2016

This research paper explores the process of developing skateboarding spaces in urban parks. Skateboarding is one of the most popular sport activities representative of urban parks. This research paper will analyze the process of introducing skateboarding activities into park spaces and their acceptance by the general public as well as derive meaningful general implications for park space development planning. The research method is a discourse analysis of newspaper articles regarding skateboarding issued between the 1960s and 2010s. These articles are the main resources to show the creation of a skateboarding culture, generation of skate park spaces, and the extinction of these spaces during the research period. The result of this research is as follows. There are reasons that allowed for the creation of skate park spaces in urban parks. First of all, positive associations that people have regarding skateboarding have influenced the park's users and operators' decisions that a park is proper space for skateboarding activities, and the agreement to remodel the park space. Secondly, skate parks became a space for multiple-uses that can be shared with other emerging sports, which resulted in a building boom of skateboarding spaces in urban parks. Thirdly, urban parks and their new culture of active sports became a marketing tool used by local governments to attract new inhabitants to their new towns. On the contrary, there are three main reasons for the deterioration of skate parks. First of all, within parks in which skateboarding activities collided with other park usage, the skate parks disappeared. Secondly, skate parks built specifically for competitive skateboarding events and without consideration of casual skaters disappeared, as these facilities were not sustainable for use in the long term. Thirdly, the golden age of skate park skateboarding did not last long, as skateboarding trends shifted from trick performance to street skating, where skate parks are no longer needed. For this reasons, the exclusive use of park space for skateboarding activities has faded from public interest. The findings of this research suggest how sport activities should be introduced to urban parks. At first, each park's management needs to identify a sport suitable for long-term development, and not only plan for temporal events or follow fleeting trends. Secondly, the park's management systems should reflect a type of sport activity that would not only be popular at the beginning of the spaces development, but also take into consideration how these activities will change over time. Lastly, in cases where there are conflicts between sport activities and other activities in urban parks, attempts should be made to suggest feasible solutions other than the liquidation of sport spaces. This study explains the development process of sport spaces offered in urban parks, by thorough research of the process of acceptance of skateboarding activities in current urban park systems. This conclusion also indicates further areas for research with the purpose of understanding general best practices in urban parks sport space planning.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.61-72
• /
• 2014

To present a guideline on the construction and management of artificial wetlands for high biomass production, three emergent macrophytes (Phragmites australis, PA; Typha angustifolia, TA; and Zizania latifolia, ZL) were planted under two substrates conditions (general soil with and without moss peat) and two water levels (5 cm and 20 cm) and monitored for three years. ZL showed greater growth performance rather than the others not only at early growth phase in the first year [shoot height, 200 cm; above-ground dry weight (AGDW), 500 $g/m^2$] but also in the last year (ZL, 1,100 $g/m^2$; TA, 770 $g/m^2$; and PA, 450 $g/m^2$ of AGDW). ZL with rapid growth at the early growth phase was not affected by naturally introduced weeds, whereas slower and poorer growth of PA and TA at the early growth phase resulted in relatively higher introduction and establishment of natural weeds. In turn, such introduced weeds negatively contributed to the growth of PA and TA particularly under shallow water (5 cm) with the substrate condition including moss peat. We suggest a plant material with rapid and great growth at the early phase such as ZL for reducing possible negative influences by the natural weeds and wild animals for high biomass production in constructed wetlands. A pre-growing process in greenhouse prior to planting might be an useful option to raise the competitiveness of those species when planting PA and/or TA. In addition, we recommend that integrated weed management system with utilizing various options at the most appropriate timing must be applied for maintaining sustainable high biomass production at the artificial wetlands.

• Management & Information Systems Review
• /
• v.31 no.3
• /
• pp.223-248
• /
• 2012

This study analyses support policy and structural change of textile industry in Daegu Kyungbuk region, and suggests major issues for textile industry's innovation. In Daegu Kyungbuk, it was 1999 that a policy, so called Milano Project, in order to promote a textile industry was devised. In 2004, the Regional Industrial Promotion Plan was devised. The plan was born from a view point of establishing a regional innovation system and of promoting the innovative clusters under a knowledge based economy. After then, the Regional Industry Promotion Project or Regional Strategic Industry Promotion Project became a core of regional textile industrial policy. Research results indicated that the first stage Milano project (1999-2003) showed both positive and negative effects. There were no long-term development plan, clear vision and strategy. But, core industrial infrastructure for differentiated product development, such as New product Development Support Center and Dyeing Design Practical Application Center, was constructed. The second stage Daegu Textile Industry Promotion Plan (2004-2008) displayed a significant technological performance and new product sales with the assistance of Kyungbuk province. Also, textile industry revealed positive fruits such as financial structure, productivity, and profitability as a result of strong restructuring. In industrial structure, there was a important change from clothe textile material to industry textile material. Most of textile companies did not showed high capability in CEO's technology innovation intention, entrepreneurship, R&D and human resource competency in compare with other industry. We suggested that Daegu Kyungbuk has to select and concentrate on the high-tech textile material and living textile for sustainable development and competitiveness. We also proposed a confidence and cooperation based innovation network and company oriented innovation cluster.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.55-69
• /
• 2021

For the national economic development, the participation of women in the social and economic activities is crucial. The popularization of start-ups, digital transformation, and WEconomy trends have lowered the barriers to opportunities for women to start a business and provide an environment in which women can grow faster. This paper examines the significance and process of success of women entrepreneurs and the characteristics of innovation strategies and achievements by linking the recently changing business environment of a company, factors influencing the success of women entrepreneurship, and innovation activities. To this end, four companies' cases were analyzed in the fields of distribution/service and consumer products/services, which are areas of large investment among female startups. The result shows that women entrepreneurs recognize the meaning of success as creating and continuing to create a 'corporate value through establishing a trust relationship with customers' within the 'balance between personal life and work.' In terms of the business ecosystem, women entrepreneurs strive for 'business activities based on the win-win growth of consumers, producers and sellers' for success, and rather 'focus on the process with a problem-solving approach' rather than achieving performance-oriented goals. Also through excellent power of observation, flexibility, and execution power, women entrepreneurs conduct business by adapting to changing trends. In terms of innovation activities, the innovation strategy of women-led companies puts priority on 'creating the value customers want' and focuses on innovation in the 'customer-centric business model' rather than technological innovation. As such, women-led companies show several differentiated characteristics, which enable them to create corporate value and achieve sustainable growth. The barriers to challenges and opportunities for women to start a business have been lowered, and an ecosystem has been created for female startups to grow. But why are there still so few women entrepreneurs, and the answer to where we need to close these gaps is ultimately a close analysis and investigation of the field. We must present milestones for growth steps through the accumulation of case studies of women startups that have exited. In addition, women can stand as economic agents only when the policy targets are subdivided and specific approaches to child-rearing and childcare for women entrepreneurs must be taken. This paper expects to serve as basic data for follow-up studies and become the basis of research for women entrepreneurs to grow as economic agents.

• Clean Technology
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2022

In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes-MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR-were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L^-1 T MAH influent could be 98% removed when the HRT of the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.162-171
• /
• 2021

The Korean government proposed the K-SDGs in 2019 to promote the UN SDGs, but the role and tasks of science and technology, an important means of implementing the SDGs, have not been materialized. Accordingly, the role of science and technology ODA for the SDGs was established through the Ministry of Science and ICT's policy research project 'Science and Technology ODA Promotion Roadmap for Spreading the New Southern Policy and Realizing the 2030 SDGs'. In addition, goals, strategies, and core tasks for the next 10 years were derived in 10 fields such as water, climate change, energy, and ICT. In this paper, we analyze 30 key tasks of the ODA promotion roadmap for science and technology for the realization of SDGs, and propose mid- and short-term tasks and implementation plans for effective roadmap promotion. Among the key tasks in each field, four common elements were derived: ICT/smartization, a global problem-solving center, cooperation/communication platform, and business model/startup support platform/living lab that can create and integrate roadmap implementation conditions. In addition, the four mid- and short-term tasks, 1) Establishment of science and technology ODA network, 2) Establishment of living lab business platform linked to start-up support business, 3) Local smartization of recipient countries, and 4) Expand and secure sustainability of global problem-solving centers, were set in relation to the implementation of the detailed roadmap. For the derived mid- and short-term tasks, detailed implementation plans based on the ICTization of global problem-solving centers were presented. The implementation of the mid- and short-term tasks presented in this paper can contribute to the more effective achievement of the science and technology ODA roadmap, and it is expected that Korea's implementation of SDGs will also achieve high performance.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.285-297
• /
• 2021

Globally, nuclear-decommissioning facilities have been increased in number, and thereby hundreds of thousands of wastes, such as concrete, soil, and metal, have been generated. For this reason, there have been numerous efforts and researches on the development of technology for volume reduction and recycling of solid radioactive wastes, and this study reviewed and examined thoroughly such previous studies. The waste concrete powder is rehydrated by other processes such as grinding and sintering, and the processes rendered aluminate (C3A), C4AF, C3S, and ��-C2S, which are the significant compounds controlling the hydration reaction of concrete and the compressive strength of the solidified matrix. The review of the previous studies confirmed that waste concretes could be used as recycling cement, but there remain problems with the decreasing strength of solidified matrix due to mingling with aggregates. There have been further efforts to improve the performance of recycling concrete via mixing with reactive agents using industrial by-products, such as blast furnace slag and fly ash. As a result, the compressive strength of the solidified matrix was proved to be enhanced. On the contrary, there have been few kinds of researches on manufacturing recycled concretes using soil wastes. Illite and zeolite in soil waste show the high adsorption capacity on radioactive nuclides, and they can be recycled as solidification agents. If the soil wastes are recycled as much as possible, the volume of wastes generated from the decommissioning of nuclear power plants (NPPs) is not only significantly reduced, but collateral benefits also are received because radioactive wastes are safely disposed of by solidification agents made from such soil wastes. Thus, it is required to study the production of non-sintered cement using clay minerals in soil wastes. This paper reviewed related domestic and foreign researches to consider the sustainable recycling of concrete waste from NPPs as recycling cement and utilizing clay minerals in soil waste to produce unsintered cement.