• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.147-156
• /
• 2019

The purpose of this study is to consider structural issues and analyze construction sequences when constructing hanging floors supported by Mega truss. Since suspended structures were supported by the Mega truss, vertical load on suspended structures was needed to transfer from low to high. Deflection management of structures was the primary point under construction. The results of this study were as follows; The steel structures, which has relatively lighter self-weight, were constructed upwards after the base floor steel truss erection. Concrete Placing, which has relatively heavier self-weight, were performed in two phases to minimize structure's deflection. Slab was placed downwards from the top floor to lower floor whereas column was places upwards. Deflection measurements were carried out at every construction sequences.

• Smart Structures and Systems
• /
• 제10권6호
• /
• pp.557-572
• /
• 2012

This paper focuses on the vibration control of long-span reticulated steel structures under multi-dimensional earthquake excitation. The control system and strategy are constructed based on Magneto-Rheological (MR) dampers. The LQR and Hrovat controlling algorithm is adopted to determine optimal MR damping force, while the modified Bingham model (MBM) and inverse neural network (INN) is proposed to solve the real-time controlling current. Three typical long-span reticulated structural systems are detailedly analyzed, including the double-layer cylindrical reticulated shell, single-layer spherical reticulated shell, and cable suspended arch-truss structure. Results show that the proposed control strategy can reduce the displacement and acceleration effectively for three typical structural systems. The displacement control effect under the earthquake excitation with different PGA is similar, while for the cable suspended arch-truss, the acceleration control effect increase distinctly with the earthquake excitation intensity. Moreover, for the cable suspended arch-truss, the strand stress variation can also be effectively reduced by the MR dampers, which is very important for this kind of structure to ensure that the cable would not be destroyed or relaxed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권2호
• /
• pp.103-112
• /
• 2005

본 연구에서는 과거 붕괴사고로 인해 큰 사회적 이슈가 되었고 현재 확장공사가 진행 중인 성수대교를 대상 구조물로 하여 시공중 계측을 통한 각 시공단계별 안정성을 확인하였다. 그 결과, 앵커리지 트러스와 서스펜디드 트러스 가설단계별로 측정된 계측값은 구조해석값의 60~110%이고, 선하중 재하에 의해 부재에 발생하는 응력이 해석값과 유사하게 나타났으므로 각각의 부재는 충분한 강성을 가지고 있고 시공 상태도 양호한 것으로 판단되었다. 기존부와 확장부 간의 일체화 여부를 파악하기 위하여 실시한 진동변위 측정 결과, 기존부와 확장부는 횡방향 부재 및 스웨이 브레이싱의 볼트체결로 인해 일체화 된 것으로 확인되었다.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.165-185
• /
• 2015

The suspended zipper bracing system is suggested to reduce the flaws of ordinary zipper braced and concentric inverted V braced frames. In the design procedure of suspended zipper bracing systems, columns and top story truss elements are strengthened. This bracing system show different performances and characteristics compared with inverted V braced and ordinary zipper frames. As a result, a different response modification factor for suspend zipper frames is needed. In this research paper, the response modification factor of suspended zipper frames was obtained using the incremental dynamic analysis. Suspended zipper braced frames with different stories and bay lengths were selected to be representations of the design space. To analyze the frames, a number of models were constructed and calibrated using experimental data. These archetype models were subjected to 44 earthquake records of the FEMA-P695 project data set. The incremental dynamic analysis and elastic dynamic analysis were carried out to determine the yield base shear value and elastic base shear value of archetype models using the OpenSEES software. The seismic response modification factor for each frame was calculated separately and the values of 9.5 and 13.6 were recommended for ultimate limit state and allowable stress design methods, respectively.

• Structural Engineering and Mechanics
• /
• 제38권2호
• /
• pp.157-169
• /
• 2011

In this paper the time-dependent closed-form static solution of the suspended pre-stressed biconcave and biconvex cable trusses with unmovable, movable and elastic or viscoelastic yielding supports subjected to various types of vertical load is presented. Irvine's forms of the deflections and the cable equations are modified because the effects of the rheological behaviour needed to be incorporated in them. The concrete cable equations in the form of the explicit relations are derived and presented. From a solution of a vertical equilibrium equation for a loaded cable truss with rheological properties, the additional vertical deflection as a time-function is determined. The time-dependent closed-form model serves to determine the time-dependent response, i.e., horizontal components of cable forces and deflection of the cable truss due to applied loading at the investigated time considering effects of elastic deformations, creep strains, temperature changes and elastic supports. Results obtained by the present closed-form solution are compared with those obtained by FEM. The derived time-dependent closed-form computational model is used for a time-dependent simulation-based reliability assessment of cable trusses as is described in the second part of this paper.

• 기술사
• /
• 제34권5호
• /
• pp.29-33
• /
• 2001

This paper summarizes the design and construction of the roof canopy structure for the SEOUL 2002 World Cup Main Stadium with a design inspired by Korean traditional beauty emphasizing images of the Pangpae kite. The stadium has also been designed for maximization of its post-World Cup utility to be used on as every basis by the citizens. The stadium canopy is a unique spatial network of truss members with a tensile membrane roof suspended from 16 masts. The canopy covers 40,950 ㎡. which is clad with a pre-stressed tensile membrane of PTFE coated fiberglass fabric and the glass.

• Structural Engineering and Mechanics
• /
• 제64권5호
• /
• pp.671-681
• /
• 2017

This study investigates the structural performance of 3D steel pipe rack suspended scaffolding systems. For the purpose, a standard full scale 3D steel pipe rack suspended scaffolding system considering two frames, two plane trusses, purlins and wooden floor is constructed in the laboratory. A developed load transmission system was placed in these experimental systems to distribute single loads to the center of a specific area in a step-by-step manner using a load jack. After each load increment, the displacements are measured by means of linear variable differential transducers placed in several critical points of the system. The tests are repeated for five different system conditions to determine the structural performance. The means of system conditions is the numbers of the tie bars which are used to connect plane trusses under level. Finite elements models of the 3D steel pipe rack suspended scaffolding systems considering different systems conditions are constituted using SAP2000 software to support the experimental tests and to use the models in future studies. Each of models including load transmission platform is analyzed under a single loading and the displacements are obtained. In addition, to calibrate the numerical models some uncertain parameters such as elasticity modulus of wooden floor and connection rigidity of purlins to plane trusses are assessed experimentally. The results of this work demonstrate that when increasing numbers of tie bars the displacement values are decreased. Also the results obtained from developed numerical models have harmony with those of experimental. In addition, the scaffolding system with two tie bars at the beginning and at the end of the plane truss has the optimum structural performance compared the results obtained for other scaffolding system conditions.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.197-202
• /
• 2008

한국토지공사는 주거, 금융센터, 리조트 시설, 쇼핑 몰, 관광과 스포츠 시설을 포함하는 대규모 단지계획으로서 인천 청라지구를 계획하고 있다. 대규모 단지 (1780만$m^2$)중에 하나가 건설 중이다. 전체지역을 6개의 지역으로 구분하고 6개의 보석 명칭(크리스탈, 샤파이어, 루비, 에머랄드, 자드, 진주, 다이아몬드)들을 부여하고 있다. 한국토지공사는 3개의 주거 단지에 그 지역을 대표할 수 있는 다양하고 특별한 형태와 구조 시스템을 요구하였다. 본인은 이러한 구조형태의 인도교를 소개하고자 한다. 4개의 사장교 뿐만 아니라, 아치교과 트러스교들이 계획되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.422-430
• /
• 1998

This paper presents the results of a major parametric study on the collapse cause of the Sungsoo Grand Bridge, a Gerber-type continuous truss bridge, which had collapsed just at the 15th year since opening to traffic. Among the various collapse causes such as poor design, poor welding, poor maintenance, and heavy traffic loads, this study focuses on the collapse cause assessment incorporating the effects of braket and H-beam members right below the expansion joint of the suspended truss. A local FEM analysis using fine shell elements is carrided out for the more precise estimation of stress range of the vertical pin-connected hanger whose fatigue fracture triggered the collapse of the bridge. Both the conventional S-N approach and the Ang-Munse's fatigue reliability method are used for the evaluation of the fatigue life and fatigue failure probability for the assessment based on all the available results of various field and labolatory tests. From these observations, It may be affirmatively stated that the effects of bracket and H-beam members accelerated the fatigue failure, and thus should be regarded as one of major causes that triggered the bridge collapse

• 대한토목학회논문집
• /
• 제3권3호
• /
• pp.27-37
• /
• 1983

본(本) 연구(硏究)는 경기도(京畿道) 설계심의회(設計審議會)에서 천마산(天馬山) 청소년(靑少年) 심신수련장(心身修練場) 현수교(懸垂橋) 설계심의시(設計審議時) 현수교(懸垂橋)의 동적(動的) 거동(擧動)에 대한 설계미비(設計未備)의 원인(原因)이 아직도 체계화(體系化)되지 못한 우리 나라 현수교(懸垂橋)의 설계자료(設計資料)와 지침(指針)의 불비(不備)함에 그 동기(動機)를 얻어, 유한요소법(有限要素法)을 적용(適用)하여 현수교(懸垂橋)의 비틀림진동(振動)에 대한 고유진동수(固有振動數)와 이에 상응(相應)하는 고유진동형(固有振動形)을 구(求)하였다. 실제(實際)로 현수교(懸垂橋)의 일반적(一般的) 거동(擧動)은 수직(垂直) 수평면(水平面) 내(內)에서의 연성(連成)된 운동(運動)으로 표시(表示)되지만 사용목적(使用目的)에 부합(附合)하여 그 진폭(振幅)을 미소(微小)하도록 제한(制限)하면 수직(垂直) 비틀림 진동(振動)은 단독(單獨)으로 비연성화(非連成化)할 수 있으며, 이에 따라 해석하였다. 1973년 6월에 개통된 Streamlined Box-Girder Type인 남해대교(南海大橋)와 Lateral Bracing으로 이루어진 단경간의 천마산(天馬山)의 현수교(懸垂橋)의 설계자료(設計資料)를 이용하여 수치해(數値解)를 얻었으며, 천마산(天馬山) 현수교(懸垂橋)의 경우(境遇) 보조(補助) 보강(補强)케이블의 유무(有無)에 따른 고유진동수(固有振動數)와 진동형(振動形)을 구(求)하여 비교(比較) 검토(檢討)하였다. 보강(補强)케이블의 유무(有無)에 따라 초기의 진동수(振動數) 등에서는 그 영향이 매우 뚜렷하였으나, 진동형(振動形)이 복잡해짐에 따라 보강(補强)케이블의 영향은 미약했거나 또는 오히려 역효과를 가져왔다. 남해대교(南海大橋)에 있어서 유한요소기법(有限要素技法)과 전자계산기에 의해 본(本) 연구(硏究)에서 구한 고유진동수(固有振動數)와 남해대교(南海大橋) 건설지(建設誌)에 있는 Frequency Equation으로 구한 값 또는 풍동실험(風洞實驗)에 의한 결과(結果) 등과 비교(比較) 검토(檢討)하였으며, 비교(比較) 결과(結果) 좋은 일치(一致)를 보여주었다.