• International Journal of High-Rise Buildings
• /
• v.5 no.3
• /
• pp.205-211
• /
• 2016

This paper addresses the key technologies for supertall building construction based on the Lotte World Tower project in Korea. First, the mega-mat foundation construction technologies are shown, including ultra-low heat concrete, heat of hydration control programs, and the logistics plan. Then, high strength concrete technologies of 50~80 MPa are introduced and discussed within the context of the highest pumping record in Korea at 514.25 meters. Structural design concepts of gravity load and lateral force resistance systems are introduced, along with surveying systems using GNSS and temporary installation plans of special heavy equipment like tower cranes, hoists, and high pressure concrete pumps. If it is possible to coordinate these key technologies and others, optimizing for the building's design and construction, supertall building construction can be successfully completed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.216-221
• /
• 2000

This paper deals with the Gain Control in the processing of the underwater acoustic image obtained from side scan sonar(SSS) system. At first, this paper describes the principles of SSS that is a surveying equipment for the underground of the rivers or dams as well as sea floor. Then this paper analyzes the cause and effects of the time varying intensity from the view point of transmission loss and beam pattern. At last, the time varying gain filter that is adopted by the towfish is introduced.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.2 s.107
• /
• pp.149-155
• /
• 2006

There are various types of noise around us such as road traffic noise, aircraft noise and floor impact sound, equipment noise, etc. Researches on the noise criteria and the evaluation method for the diffuser noise of HVAC are insufficient. dB(A) and NC values represented in ASHRAE guide book are applied as a noise criteria for diffuser noise, which have some problems like that the values between dB(A) and NC have deviation even if the sound is same one. Therefore, the evaluation method should be considered and proposed based on the subjective responses. From these reasons, this study aimed to analyze the evaluation factors for the diffuser noise of HVAC reflected on the subjective responses by surveying vocabularies and grouping them with factor analysis.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.255-259
• /
• 2000

Despite improved working environment with increased automation in industry, the nursing professions are subject to great deal of potential occupational risks, including chemical exposure, occupational stress, and musculoskeletal stress. In this study, we investigated the work-related Low Back Pains(LBPs) among hospital nursing profession by questionnaire survey. The results showed that over 89% of nursing personnel answered had experienced work-related LBPs. Among these personnel, patient handling caused more than 78% of the incidents occurring at work. This study will thus contribute as a basic reference to the hospitals and ergonomic practitioners for nursing profession training program development, facility and equipment redesign, and for guiding future research concerning prevention of this very important occupational health problem.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.455-461
• /
• 2004

Now, GPS survey is used on equipment from leisure to precise geodetic survey and nation admits the result of GPS survey. When surveyors perform precise GPS survey, they use post processing method but they greatly use real time processing method to consider field status. Especially, when surveyors measure the result of moving target, they use real time GPS survey to the best method. For this study, the author precisely surveyed distance of ship launching from shipyard on real time using real time precise GPS method. In this paper, the author compares and examines the accuracy of first real time precise GPS survey method nationally and the capability on use. And the author performed real time precise GPS survey in NOKBONG and 21C shipyard positioning at GEOJEDO.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.184-192
• /
• 1995

Although ship's draught information onboard is substantial for both the safety of navigation and the estimation of loaded cargoes its accuracy depends in traditional surveying method on the skillfulness of observers and the condition of the sea surface round the vessel. To obtain more accurate information accessibly measuring instruments with sophisticated sensors such as mechanical electronic and ultrasonic transducers have been developed. however they have still limitation in accuracy and in making up a system due to the complexity of processing signal. In this paper we propose a he technique for analyzing ultrasonic pulse signal in order to improve the measurement accuracy and simplify a remote sensing system of draught by ultrasonic waves. This technique is useful for measuring draught being considered the influence of sea surface fluctuation and for transferring its data briefly to required equipment in integrated bridge system.

• Journal of the Korean Institute of Educational Facilities
• /
• v.15 no.6
• /
• pp.4-11
• /
• 2008

Global environment is getting deteriorated at an alarming rate. Eco-school could be one of the effective solutions to protect our environment and a good sample of architecture to economize in total energies, resources and greenhouse gases. In case of our country, the study of eco-school planning is not sufficient compared with other countries, so this paper would be a good study on the indoor environment of the classroom by surveying their opinions and ideas from the group of users in elementary school. The result of this study shows that the proper installation of building equipment and nature ventilation system is necessary to provide delightful environment for the students and to save the energy. To ensure that we have adequate saving and protection, it is necessary to change the existing appraisal standard.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.349-354
• /
• 2005

There are various types of noise around us such as road traffic noise, aircraft noise and floor impact sound, equipment noise etc. Recently researches on the criteria to evaluate the noises have been progressed, however, researches on the noise criteria and evaluation method for the diffuser noise of HVAC are insufficient. dB(A) and NC values represented in ASHRAE guide book are applied as a noise criteria for diffuser noise, which have some problems like that the values between dB(A) and NC have deviation even if the sound is same one. Therefore, the evaluation method should be considered and proposed based on the subjective responses. From these reasons, this study aimed to analyze the evaluation factors for the diffuser noise of HVAC reflected on the subjective responses by surveying vocabularies and grouping them with factor analysis.

• Journal of Environmental Health Sciences
• /
• v.3 no.1
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.31-38
• /
• 2005

Importance of road that is country base equipment is occupying fair part. Therefore, establishment of road and maintenance expense for road management are increasing continuously. These problem can manage efficiently through data model construction that take advantage of framework data. But, because of difference of method of study in research institution, framework data research was constructed being overlapped until current. This is because framework data research was no access of application side. Therefore, National Geographic Information Institute presented subject framework data model guide through framework data model standardization business. This research constructed road management data model that take advantage of traffic framework data. Therefore, we can check equal data construction and reduce expense accordingly. Also, because there are not data model development instances by framework data model, it is difficult that judge whether is suitable to apply framework data model guide. Hence, in this study, the extended road management data medel and the suitability of framework data is presented.