• 한국조사연구학회:학술대회논문집
• /
• 한국조사연구학회 2003년도 춘계학술발표대회
• /
• pp.34-41
• /
• 2003

많은 경우, 측정오차분산은 알려지지 않은 참값 또는 참값과 연관된 공변수들의 함수로 표현될 수 있다 이 논문은 단위 당 반복측정에 기초한 단위 내 표본분산을 이용한 선형측정오차분산의 추정에 관한 연구이다 이 논문은 다음의 내용을 포함한다: (1) 측정오차의 크기를 나타내는 상수 $\delta$의 추정; (2) 유한모집단으로부터의 복합표본, 작은 측정오차라는 조건하에 선형측정오차분산의 추정; (3) 부표본에 포함될 확률을 설명하기 위한 성향틴헝 추정 미국의 제3차 건강영양조사자료를 사용하여 이상의 결과들을 이용한 경험적 분석을 실행하였다.

• 응용통계연구
• /
• 제21권3호
• /
• pp.413-427
• /
• 2008

표본설계는 대표성 있는 표본추출과 이에 따른 적절한 추정식을 산출해 주어야 한다. 이때 조사결과가 모집단의 대표성을 갖기 위해서는 적절한 가중치가 부여되어야 한다. 일반적으로 표본설계시 제시된 기본가중치는 추출확률에 의해 계산된다. 그러나 조사 후 무응답등과 같은 요인이 발생된 경우 모집단의 대표성을 유지하기 위해 기본가중치의 보정이 필요하다. 본 논문은 조사 후 가중치 보정방법으로 기존에 흔히 사용하고 있는 갈퀴법(Raking)과 현재 BLS에서 적용하고 있는 방법(BLS) 그리고 최근 표본조사의 추정식으로 관심을 끌고 있는 일반화회귀식(GREG)에 의한 방법을 비교하였다. 자료분석은 산업단지공단내의 산업분류별 총 종사자수가 사용되었으며 MSE, Coverage, CV, Large Error(LE), NOn-Centrality(NC) 등의 비교통계량을 이용하여 그 결과를 비교하였다.

• 한국생활과학회지
• /
• 제24권3호
• /
• pp.451-461
• /
• 2015

It was the purpose of this study that propose architectural design process through analysis of concepts considering regional characteristics. The procedure of this study was as follows : First, classifying design process through investigating paper-survey and case studies. And We would investigate representation process of design concepts applied to design competitions entries. Finally, we would investigate design process applied to buildings in various districts. In the results, we could find that domestic architects were applying to site plan, floor plan, elevation plan, section plan and mass plan-led design process to express design concepts. And according to survey on buildings in various districts, we could verify that architects were applying various design process to express design concepts according to site characteristics. These results could help architects to design appropriately, according to site characteristics.

• Communications for Statistical Applications and Methods
• /
• 제12권1호
• /
• pp.29-38
• /
• 2005

In sample design, determining the weights of estimates becomes usually great influence on the result. In this article, raking methods are applied to different domain and depending on the range of the domain and sample size, the results of estimates are explained and compared. For the comparison, we use the MSE, MAE, MSPE and MAPE with Actual State of Minor Enterprisers Human Resources Survey data in 2001. The simulation result shows that more elaborate method is superior to the widely used method as expected but the difference is not quite significant.

• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.191-209
• /
• 2011

The purpose of this research is to develop a service R&D concept definition and finding service R&D demand in Korea. It is necessary to develop an effective service R&D model to improve the competitiveness of the service industry. A survey model for finding service R&D demands has been developed through extensive discussions with experts. A demand survey for 91 experts in service industry and academia has been conducted to find relative weights of each service R&D category. Several other aspects on service R&D has beed investigated to analyze the relative importance of service R&D subjects. And a benchmarking on previous service R&D research investment has been performed. Past and present service R&D topics are compared as a whole and by each individual domain. A service R&D framework and important funding areas has been suggested. The results of this research can be used for research fund allocation decisions for strengthening service industry competitiveness.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2251-2258
• /
• 2012

본 연구는 잠재적 위험요인을 탐색하는 방법으로 단순임의추출분석(unweighted sample design), 빈도 가중치를 적용한 단일표본분석(frequency weighted sample design), 가중치를 층화하여 적용한 복합표본분석(complex sample design)을 비교하고, 도출된 결과에 통계적인 차이가 있는지를 파악하고자 수행되었다. 자료원은 2009 국민건강영양조사의 이비인후과 검진 자료를 이용하였다. 분석 방법은 피어슨의 교차검정(Pearson chi-square test)과 라오-스콧교차검정(Rao-scott chi-square test)을 이용하였다. 분석 결과, 빈도 가중치만을 적용한 단일표본분석의 경우에는 모든 변수가 유의한 위험요인으로 과대 예측 되었고, 가중치를 적용하지 않은 단순임의추출 분석과 복합표본분석은 유의수준 및 결과에 차이가 있었다. 국가통계자료를 이용할 때, 연구의 결과가 전체 인구집단을 대표할 수 있도록 의미를 부여하기 위해서는 층화변수와 집락변수를 사용하여 가중치를 적용하는 복합표본분석이 필요하다. 나아가, 빈도 가중치만을 적용하는 경우에는 연구 결과에 대한 과잉해석의 가능성이 높기 때문에 각별한 주의가 요구된다.

• 사상체질의학회지
• /
• 제33권1호
• /
• pp.57-89
• /
• 2021

Objectives This study is aimed to develop a standard instrument of diagnosis and assessment for the original symptom of Taeeumin. Methods 1. Based on the clinical practice guidelines, the works of Dong-mu, and the expert clinical judgment of the research team, the items to be used in the instrument of diagnosis and assessment for the original symptom of Taeeumin were extracted, and translation was proceeded in plain Korean for easy application and feasible use in daily clinical practice. As a result, candidate items for the diagnosis and assessment tool were derived. 2. An online questionnaire survey was conducted on the candidate items derived through the above process to the expert advisory group for (1) inclusion/exclusion as diagnosis and assessment index (2) evaluation of importance and (3) the validity of translation. Results & Conclusions Through survey of expert advisory group, the number of candidate items were reduced and the preliminary weights were assigned. And based on this, was developed. There were a total of 9 items for Exterior Cold[Wiwanhan] original symptom diagnosis and assessment tool, 21 items for Interior Heat[Ganyeol] original symptom, 15 items for Exterior Disease Unfavorable Patterns[Wiwanhan-paejo] original symptom, and 17 items for Interior Disease Unfavorable Patterns[Ganyeol-paejo] original symptom, and the weights were reflected in each response score so that the final total score could be calculated.

• 한국환경보건학회지
• /
• 제50권2호
• /
• pp.125-137
• /
• 2024

Background: The Korea Risk Information Surveillance System (K-RISS) was developed to enable the early detection of food and drug safety-related issues. Its goal is to deliver real-time risk indicators generated from ongoing food and drug risk monitoring. However, the existing K-RISS system suffers under several limitations. Objectives: This study aims to augment K-RISS with more detailed indicators and establish a severity standard that takes into account structural changes in the daily time series of K-RISS values. Methods: First, a Delphi survey was conducted to derive the required weights. Second, a control chart, commonly used in statistical process controls, was utilized to detect outliers and establish caution, attention, and serious levels for K-RISS values. Furthermore, Bai and Perron's method was employed to determine structural changes in K-RISS time series. Results: The study incorporated 'closeness to life' and 'sustainability' indicators into K-RISS. It obtained the necessary weights through a survey of experts for integrating variables, combining indicators by data source, and aggregating sub K-RISS values. We defined caution, attention, and serious levels for both average and maximum values of daily K-RISS. Furthermore, when structural changes were detected, leading to significant variations in daily K-RISS values according to different periods, the study systematically verified these changes and derived respective severity levels for each period. Conclusions: This study enhances the existing K-RISS system and introduces more advanced indicators. K-RISS is now more comprehensively equipped to serve as a risk warning index. The study has paved the way for an objective determination of whether the food safety risk index surpasses predefined thresholds through the application of severity levels.

• Journal of the Korean Data and Information Science Society
• /
• 제24권4호
• /
• pp.701-712
• /
• 2013

이러닝 (e-learning)산업통계는 이러닝산업 전반에 걸친 수요와 공급을 망라한 실태조사통계로 2004년 이후 정보통신산업진흥원에 의해 매년 발표되고 있다. 한국표준산업분류가 2008년 개정 (제9차)됨에 따라, 이러닝 수요부문의 사업체조사에 사용해온 표본설계 (종사자규모 산업분류별 층화추출)에 대한 개선이 필요하게 되었다. 본 논문은 사업체조사의 목표모집단을 개정된 한국표준산업분류에 따라 종사자규모 산업분류별로 층화하고, 각 층에 부여된 목표변동계수값을 만족시키는 멱배분법의 승수를 모의실험으로 찾아서 층화별로 표본의 크기를 결정하였다. 이와 더불어 본 연구에서 고려한 표본가중치 계산, 그리고 가중치를 반영한 모수추정량과 추정오차는 기존의 조사에서 사용된 기술 통계적 분석을 벗어나 업종별과 종사자 규모별 추정과 추정의 정도에 대한 평가를 가능하게 하였다.

• Nutrition Research and Practice
• /
• 제14권2호
• /
• pp.160-166
• /
• 2020

BACKGROUND/OBJECTIVES: The obese population is rapidly increasing because of reduced physical activity and a Westernized diet; consequently, various chronic diseases are more prevalent. With the increasing interest in body shape and appearance, research on body shape perceptions and accompanying weight control behaviors are needed for healthy weight management. SUBJECTS/METHODS: A cross-sectional survey was conducted on randomly selected 536 (209 men and 327 women) aged 20 to 65 years. Body mass index (BMI), body-shape perception, weight control behavior, quality of sleep, and place of residence were collected using self-reported questionnaires. Multivariable logistic regression analysis was conducted using complex design in each groups. Collected data were analyzed using the SAS 9.4 statistical package, and the significance level was set at P < 0.05. RESULTS: When these two variables were divided into four groups, they were found to influence dieting attempts. People with abnormal weights who were dissatisfied with their body shapes attempted dieting 5.23 times more than those with healthy weights and satisfaction with their body shapes. Further, those with normal weights but dissatisfaction with their bodies attempted dieting 4.45 times more than those who were satisfied with their shapes. Subjects in their 20s attempted dieting 2.53 times more than those in their 30s and 40s, and female subjects attempted dieting 2.24 times more than male subjects. CONCLUSIONS: A correct perception of one's shape can be an important factor for dietary behavior, as body shape perceptions and dieting attempts are strongly related. Additionally, healthy weight management and nutrition education are important elements to incorporate into a weight control program aimed at preventing excessive weight control behaviors and promoting correct perceptions of body shape.