• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.145-151
• /
• 1998

This paper addresses the results of an experimental and analytical research of cylindrical coil spring subjected to dynamic behavior. Transfer functions are presented for both deflection and transmitted force as the output with force as the input. Steady state sinusoidal magnitude ratio and transmittance are plotted along with experimental data. It is shown that dynamic characteristic of cylindrical coil spring must be used to enhance the reability of vibration system dynamic behavior analysis in actuating over some frequency.

• 지질공학
• /
• 제21권4호
• /
• pp.369-379
• /
• 2011

공막힘에 의해 지하수 채수량이 감소되고 수질이 저하된 관정을 여러 가지 세척 방법으로 재생시켜 주변 관정의 지하수 산출량과 수질을 개선시킬 수 있으며, 관정의 수명도 연장시킬 수 있다. 본 연구에서는 부산광역시 금정산에 위치하는 2개의 암반관정에 대하여 폭약을 이용한 방법과 공기-브러쉬를 이용하여 막힘 관정을 세척하고 세척효과를 수리시험, 수질 분석 및 지구물리검층(광학영상 촬영과 초음파영상 촬영)에 의해서 확인하였다. 공기-브러쉬 세척 방법에 의해서는 세척 후에 비양수량이 최대 약 273%까지 증가하였으며, 세척 후의 지하수 수질을 보면 $F^-$, $SiO_2$가 증가하고, $Cl^-$, $NO_3^-$, 탁도는 감소하였다. 폭약 방법을 이용한 결과 세척 전보다 후에 비양수량이 최대 약 156% 증가되었으며, 세척 시간이 경과하면서 $F^-$와 $SiO_2$ 농도는 증가하였고, $Cl^-$, $NO_3^-$ 농도와 탁도는 감소하였다.

• 한국지열·수열에너지학회논문집
• /
• 제15권4호
• /
• pp.1-7
• /
• 2019

Cooling using the Han River has recently been spreading. The Ministry of Trade, Industry and Energy submitted a revised enforcement ordinance to include river water in renewable energy. Therefore, it is necessary to analyze the water temperature characteristics of Han River. Especially, it is necessary to investigate the effect on hot summer. In this study, we analyzed the water temperature of the last 11 years. It is intended to utilize the Han River for building cooling in the future.

• 통상정보연구
• /
• 제9권1호
• /
• pp.427-449
• /
• 2007

The question of what our cultural goods might have known in a major exporting market, has intrigued investigators since 2000 year. Actually, Maybe Korean cultural assets just didn't have time to get to know International or Asia market. But now, a new euphoria can be tasted, on the lips of the small but growing Korean Contents Mania, as New Korean Wave-Crust begin to welcome the priciest contents from korea. Given Asian's surging population for our entertainment contents-drama, movie, music, character, etc., and the sense of a positive response its newly international market, it is hardly surprising. Now, Korea Wave must play an important roles in our country- economy, business, specially. This paper is seeking in OSMU on Korean Contents in East-North Asian Market, and is developing about Korean Wave study model. and It also points to a different strategy for exporting cultural contents, suggesting it should be effected for model to OSMU.

• 플랜트 저널
• /
• 제5권4호
• /
• pp.73-79
• /
• 2009

Increase of consumption in limited coal reserves leads prices surging. As a result, iron works which produce products with coal are in difficulties. Accordingly, it is required a lot of research of using non-caking coal that is relatively low cost and has abundant reserves. Direct drying and indirect drying are two major methods of drying the coal. Recently, to minimize the needed calories and to save energy, using fluidbed or fluidizing method is a recent main trend of minimizing the size of the facility and maximizing energy efficiency. However there is also disadvantage such as increasing facility investment because of installing additional facilities in the latter part. In this study, we will have theoretical researches on the indirect drying method with heat exchange system which have been traditionally used. As a result it is expected to increase the efficiency of the facility operation.

• 산업경영시스템학회지
• /
• 제23권58호
• /
• pp.41-47
• /
• 2000

Global(mega) event has increased throughout the 1990s, with the biggest surge occurring in the Asia-Pacific region. Along with this upward trend, competition for more desirable tourists is also surging, so destinations cannot be complacent (Getz, 1997). Event is appearing as the powerful method in the fierce competition around the industry. International events like 99 Hanam Environment Expo have been held annually in Korea since 1991 in which the local government system started. The main roles of event are to enhance the image of communities and attract tourists (Kotler and Haider and Rein, 1993), to strengthen destination attractiveness as drawing power (Mill and Morrison, 1985), and so on. Focused on the destination image, the research (Sirakaya and Sheppard and McLellan, 1997) about the effect of perceived safety at a potential vacation destination showed that destination marketers, travel agents, and hospitality industry members should be concerned with improving their images when such images are negative with regard to safety. Event industry in Korea does not seriously recognize the importance of the safety management against accidents known for tarnishing the destination images. Moreover few safety standards or studies for event industry can be found. This paper investigated the safety factors considered by visitors of 99 Hanam Environment Expo and analyzed the correlation between the safety factors and the demographic characteristics of the visitors.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.895-906
• /
• 2000

A three dimensional linear frequency-domain lifting surface panel method was used for the aerodynamic analysis of axial flow type micro-fans. As proven by the duct modeling, the tip clearance of the micro-fans tested is large enough to ignore the calculated effect of the duct system. As the numerical results and experimental data agreed well in the operating point region, the method was applicable in the parametric studies to determine the design parameters of axial flow fans. Experiments on micro-fans were carried out based on KS B 6311. The newly designed micro-fan showed improvements in both static pressure rise and volumetric flow rate compared to the existing fans at a given operating condition. No detection of surging and the smooth characteristic curve proved the improvement in performance. To reduce the fan noise in the fan design, it was necessary to make use of the frequency spectrum analysis data. Measurement of sound pressure level for micro-fans was conducted based on KS B 6361 and KS A 0705. The peak - which occurs at blade passage frequency and its higher harmonics due to the fan noise - was not detected. This justifies the design methodology of the blade.

• Journal of Information Technology Applications and Management
• /
• 제9권3호
• /
• pp.113-127
• /
• 2002

The effort for software process improvement is lately surging its interest though it does not satisfy both developer and receiver In terms of low productivity, quality, delay and increasing cost. According to current research, software process improvement contributes to improvement of productivity, its Duality, reduction of development time and cost, and the prediction of the time limit for delivery, which means software process improvement affects competitive advantage among developers. The latest research is whether the investment for information technology substantially had effect on improvement of productivity. That is, software process improvement and maturity of software industries has influence upon economic efficiency and as a result, it plays an important role in whole industries. This research is that how does software process improvement using CMM (Capability Maturity Model) and SPICE (Software Process Improvement and Capability dEtermination) have a effect on factors of software engineering, and how does it have influence upon competitive advantage among SI firms. For this research, reusability, customizability, participation, and review & inspection are set to independent variable and process flexibility and process predictability are set to mediate Variable. Finally, competitive advantage among SI firms Is set to dependent variable. The targets for survey are laborers who work for SI firms. The result of this research is as follows: 1 ) Reusability, Customizability and participation is not rejected but review and Inspection is rejected in process flexibility which has significant level 0.05. 2) Reusability, Customizability and participation is not rejected but review and inspection Is rejected in process predictability which has significant level 0.05. 3) Process flexibility is not rejected and process predictability Is rejected in the competitive advantage of 51 industries which has significant level 0.05

• 지질공학
• /
• 제22권1호
• /
• pp.27-37
• /
• 2012

미고결대수층에서 우물 굴착 시 대수층 교란이 수리특성에 미치는 영향을 파악하기 위하여 우물굴착 이후의 우물개량 공법인 서지블록과 에어서징을 실시하였다. 그리고 우물 굴착 및 개량의 대수층 변화를 비교 분석하기, 위하여 단계 및 장기 양수시험을 수행하였다. 그 결과 우물 굴착 및 개량 이후의 단계양수시험에서 동일 양수율 $700m^3/day$에 대한 수위강하와 비교하였을 때 수위강하는 각각 26.01 m, 21.62 m로 4.39 m정도 감소되었다. 이때 우물특성을 파악하기 위한 우물 굴착 및 개량 이후의 스킨계수는 7.92에서 5.04로 감소되어 우물상태가 개선된 것으로 나타났다. 우물 굴착 및 개량 이후의 장기양수시험에서 양수정을 중심으로 주변 MW-2, 3, 4호정의 투수량계수 범위는 각각 $1.684{\times}10^{-3}{\sim}4.490{\times}10^{-3}m^2/sec$, $4.002{\times}10^{-3}{\sim}4.939{\times}10^{-3}m^2/sec$ 범위로 우물개량 이후의 수리전도도 값이 조금 증가되었으며, MW-1호정은 $1.018{\times}10^{-2}m^2/sec$에서 $6.988{\times}10^{-3}m^2/sec$로 감소되었다. 이는 서징하는 동안 대수층의 공기 차단 및 폐색의 잠재적인 요인으로 인하여 MW-1호정 주변 대수층의 투수성이 미세하게 감소되는 효과로 나타났다. 따라서 미고결대수층에서 우물 굴착 시 미세입자가 양수정 주변의 수리특성에 영향을 미칠 수 있음을 반드시 유의해야 한다.

• 대한기계학회논문집A
• /
• 제39권11호
• /
• pp.1123-1129
• /
• 2015

자동차부품 세척장비는 엔진과 변속기 블록 등의 가공과정에서 잔류하는 기름때를 제거하며, 잦은 수류방향 전환과 고압수의 분사를 위해 한 쌍의 2 방향 밸브를 사용한다. 그러나 정교한 밸브제어장치 없이 2 방향 밸브를 사용하는 경우 급격한 수류방향 전환에 따른 맥동현상이 발생하여 사용에 어려움이 따른다. 대안으로 하나의 3 방향 절환밸브를 사용하는 방법은 정교한 제어장치 없이도 정확한 수류방향 절환이 원활히 이루어져 이러한 문제점을 해결할 수 있다. 그러나 복잡한 유로 및 바텀플러그 형상으로 인해 유속변화가 심하게 발생하여 공동현상이 나타날 수 있다. 본 연구에서는 3 방향 절환밸브 내의 유동특성을 해석적으로 평가하였으며, 바텀플러그 하부에서 나타나는 공동현상을 공동화지표와 POC(Percent of cavitation)를 도입하여 정량화하였다. 공동현상의 저감을 위해 바텀플러그 형상을 매개변수화하고, 해석의 수렴성 개선과 해석시간을 단축시킬 수 있는 단순 유한요소모델을 이용하여 유동해석을 통한 형상최적설계를 실시하였다. 완전요인배치법을 통한 실험계획법과 인공신경망 기반 반응표면모델을 적용하여 공동현상이 발생하지 않는 POC 가 30% 미만인 바텀플러그의 형상을 제시하였다. 얻어진 최적해는 POC 27%에 대하여 바텀플러그의 허리길이와 꼬리길이가 각각 6.42mm 및 6.96mm 이다.