• Journal of Veterinary Science
• /
• v.23 no.4
• /
• pp.39.1-39.5
• /
• 2022

Patent ductus arteriosus (PDA) is a rare congenital cardiovascular anomaly in cats. Due to their small body, intercostal thoracotomy is the most common option to close the PDA. However, few reports detail the surgical technique for ligating PDA in kittens. In this case report, three cats weighing 1.4 kg, 1.2 kg, and 2.9 kg were diagnosed PDA. Clip ligation via left fourth intercostal thoracotomy was performed and the cats were successfully treated. Postoperative echocardiography showed no residual flow in any of the cases. This case report highlights clip occlusion for small cats with PDA could be safe and effective.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.215-219
• /
• 2016

Value of excellent breeding animals is important in livestock industry, but their economic life time is limited. And, many countries have been trying procuration of genetic resource in good animals. Therefore, this study was conducted to determine embryo production and to test efficiency of embryo transfer via non-surgical artificial insemination (AI) in different breed of superior sows. A total of 17 sows were used in this experiment (Duroc, n=10; Landrace, n=4; Yorkshire, n=3). The sows were artificially inseminated by semen of same breed boars. After 4 or 5 days following the AI, the embryos were obtained from the sows and then transferred to Landrace and Yorkshire recipients (n=3, respectively) by non-surgical method. The corpora lutea tended to be increased in Yorkshire and Landrace than Duroc(28 and 26 vs. 17, respectively). The recovery of embryo was 78.8% in Landrace, 65.4% in Duroc and 51.4% in Yorkshire. Duroc showed lower morulaes and early blastocyst embryos than 2, 4, 8 and 16 cell. The morula in Yorkshire was higher (P<0.05) than that of Duroc (4.7 vs. 3.4). Similarly, the morulaes and early blastocyst embryos presented greater (P<0.05) in Landrace compared with other breed sows. The recipient sows were pregnant in a Landrace only. This reason may be due to little embryos inserted in the recipients. In addition, pregnancy results were limited because of the little sows. In conclusion, ovulated ovum in sows can be affected by different breed. Also, further study needed pregnant test by using the many embryo in each breed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3037-3040
• /
• 2013

Introduction: Mammography is the most basic modality in breast cancer imaging. However, the overlap of breast tissue depicted on conventional two-dimensional mammography (2DMMG) may create significant obstacles to detecting abnormalities, especially in dense or heterogeneously dense breasts. In three-dimensional digital breast tomosynthesis (3DBT), tomographic images of the breast are reconstructed from multiple projections acquired at different angles. It has reported that this technology allows the generation of 3D data, therefore overcoming the limitations of conventional 2DMMG for Western women. We assessed the detectability of lesions by conventional 2DMMG and 3DBT in diagnosis of breast cancer for Japanese women. Methods: The subjects were 195 breasts of 99 patients (median age of 48 years, range 34~82 years) that had been pathologically diagnosed with breast cancer from December 20, 2010 through March 31, 2011. Both conventional 2DMMG and 3DBT imaging were performed for all patients. Detectability of lesions was assessed based on differences in category class. Results: Of the affected breasts, 77 (75.5%) had lesions assigned to the same categories by 2DMMG and 3DBT. For 24 (23.5%) lesions, the category increased in 3DBT indicating improvement in diagnostic performance compared to 2DMMG. 3DBT improved diagnostic sensitivity for patients with mass, focal asymmetric density (FAD), and architectural distortion. However, 3DBT was not statistically superior in diagnosis of the presence or absence of calcification. Conclusions: In this study, 3DBT was superior in diagnosing lesions in form of mass, FAD, and/or architectural distortion. 3DBT is a novel technique that may provide a breakthrough in solving the difficulties of diagnosis caused by parenchyma overlap for Japanese women.

• Journal of Chest Surgery
• /
• v.40 no.8
• /
• pp.582-586
• /
• 2007

A 48-year old male patient visited our hospital with uncontrolled hypertension and pair of the left leg. CT angiography shows atherosclerotic occlusion of both renal artery orifices and the left common iliac artery. Despite of medical treatment for 2 months, the clinical condition of the patient worsened. We performed the surgical revascularization with both renal arteries and aorto-left femoral artery bypass with using an 8 mm artificial vascular graft. He lived well without hypertension with using only angiotensin receptor blocker and an anticoagulant for 10 postoperative months. Using surgical revascularization for renovascular hypertension has decreased due to the development of intervention technology and medication, but this surgery is indicated in cases of renovascular hypertension with extensive atherosclerotic lesions. We report here on a case of surgical revacularization for medically Intractable atherosclerotic renovascular hypertension together with left common iliac artery occlusion.

• The Journal of Korean Medical History
• /
• v.25 no.2
• /
• pp.155-193
• /
• 2012

From the part "歷代醫學姓氏(Historic Doctors)" in "醫林撮要(Uirimchualyo)", the following has been noticed and concluded. 1. Because acupuncture was originated from stony needle, the word "石(sok)" contains the meaning of needle, and from this point on, words like 石(sok), 砭石(pyumsok), 箴石(Jamsok), 鑱石(Chamsok) had been derived. 2. The word 砭石(pyumsok) used in "Hwangjenaekyong(Yellow Emperor's Canon of Medicine or Hwangdineijing)" should be interpreted as acupuncture in a verb form, not a noun form. 3. 鑱石(Chamsok) or 鑱鍼(Chamchim) was used for surgical treatment for tumor, by cutting open tumors and pressing the pus out. Therefore, 砭石(pyumsok), 鑱石(Chamsok) are the same kind of needles, and 鑱鍼(Chamchim) is the tool improved from 鑱石(Chamsok) used in the Bronze Age. 4. Kwakpak put a note on 鑱石(Chamsok) in "山海經(Sanhaekyong)" that reads "it is defined as 砥鍼(Jichim) and treats tumor." This let us know the shape of 石(sok), 砭石(pyumsok), 鑱(Chamsok), 鑱鍼(Chamchim), and the stone that can be used as a surgical tool with slim & sharp shape is obsidian. 5. Because obsidian is only found around Mt. Baekdu and limited area in South Korea & Japan in Asia, it is closely related with the life & medical environment of the tribe "Mt. Baekdu". 6. The development of 鑱鍼(Chamchim) was influenced by surgical treatment used in early stage of civilization, and its origin is traced upto Gochosun dynasty. Korea's own traditional medical knowledge is derived from this surgical treatment skill. 7. Because the acupuncture is originated from Gochosun dynasty, 鍼(chim) was derived from 箴(Jam) of 箴石(Jamsok), 䥠(Chim) & 䥠(Chim) both were used for a time being, and finally settled into 鍼(Chim). 8. The word 針(Chim) showed up at Myung dynasty, and started to be used in Korea from early Chosun dynasty. 9. In the early Chosun dynasty, 鍼(Chim) was used for medical term, and 針(Chim) for non-medical term. In the mid Chosun dynasty, 針(Chim) was used as a term for tool, and 鍼(Chim) as a term for acupunctural medical treatment. 10. Under the order of King Sunjo, Dr. Yesoo Yang published "醫林撮要(Uirimchualyo)", added "醫林撮要續集(Sequel to Uirimchualyo)", and added "歷代醫學姓氏(Historic Doctors)" again which eventually made totally 13 books of "醫林撮要(Uirimchualyo)". In addition, many parts of "醫林撮要續集(Sequel to Uirimchualyo)" were quoted in "東醫寶鑑(Donguibogam)", and influenced much in publishing "Donguibogam". 11. In "歷代醫學姓氏(Historic Doctors)" of "醫林撮要(Uirimchualyo)", the same way in "Donguibogam", referred to 針(Chim) as a term for a needle, and 鍼(Chim) as a term for Acupuncture. 12. From the usage of 針(Chim) & 鍼(Chim), shown in "鄕藥集成方(Hyangyakjipsungbang)", "醫林撮要(Uirimchualyo)" and "東醫寶鑑(Donguibogam)", we can notice the spirit of doctors who tried to take over the legitimacy of Korean tradition, and their elaboration & historical view that expresses confidence on our own medical technology, through the wording 鍼(Chim).

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.103-116
• /
• 2021

The use of 3-dimensional (3D) printing is becoming more common, and its use is increasing in the orthopedic surgery. Currently, there are four major methods of using 3D printing technology in orthopedic surgery. First, surgical planning simulation using 3D printing model; second, patient-specific surgical instruments; third, production of customized prosthesis using 3D printing technique; fourth, patient-specific prosthesis produced by 3D printing. The areas of orthopedic surgery where 3D printing technology can be used are shoulder joint, spine, hip and pelvis, knee joints, ankle joint, and tumors. Since the diseases and characteristics handled by each area are different, the method of using 3D printing technology is also slightly different in each area. However, using 3D printing technology in all areas can increase the efficiency of surgery, shorten the surgery time, and reduce radiation exposure intraoperatively. 3D printing technology can be of great help in treating patients with particularly complex and difficult orthopedic diseases or fractures. Therefore, the orthopedic surgeon should make the most of the benefits of the 3D printing technology so that patient can be treated effectively.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.253-261
• /
• 2012

In order to make dental implant surgery successful, it is important to perform proper planning for dental implant placement. In this paper, we propose a decent approach to dental implant placement planning based on geometric processing of 3D models of jawbones, a nerve curve and neighboring teeth around a missing tooth. Basically, the minimum enclosing cylinders of the neighboring teeth around the missing tooth are properly used to determine the position and direction of the implant placement. The position is computed according to the radii of the cylinders and the center points of their top faces. The direction is computed by the weighted average of the axes of the cylinders. For a cylinder whose axis passes the position along the direction, its largest radius and longest length are estimated such that it does not interfere with the neighboring teeth and the nerve curve, and they are used to select the size and type of an implant fixture. From the geometric and spatial information of the jawbones, the teeth and the fixture, we can construct the 3D model of a surgical guide stent which is crucial to perform the drilling operation with ease and accuracy. We have shown the validity of the proposed approach by performing the finite element analysis of the influence of implant placement on bone stress distribution. Adopted in 3D simulation of dental implant placement, the approach can be used to provide dental students with good educational contents. It is also expected that, with further work, the approach can be used as a useful tool to plan for dental implant surgery.

• The Journal of the Korean dental association
• /
• v.54 no.6
• /
• pp.429-437
• /
• 2016

Objectives: Photodynamic therapy has been proven to promote additional clinical and microbiological benefits in the treatment of chronic periodontitis and aggressive periodontitis. The purpose of this study is to assess the effectiveness of the photodynamic therapy for patient with periodontitis. Methods: We searched the eight Korean databases and Ovid-MEDLINE, Ovid-EMBASE, Cochrane Library. Total 300 studies were searched and 13 studies were included in the final assessment. Each of the stages from literature search and extraction of data were carried out independently by 2 researchers. We used tools of Scottish Intercollegiate Guidelines Networks for assessment of the quality of studies. Results: The safety of the photodynamic therapy was assessed by bleeding. The effectiveness of the photodynamic therapy was assessed by the reduction of Probing pocket depth (PPD) and the gain of Clinical attachment level (CAL). The mean difference of PPD was 0.46(95% CI 0.09~0.82), (p=.01).). The mean difference of CAL was ?0.49(95% CI ?1.12~0.14), (p=.13). Conclusion: The additional use of $^{\circ}{\infty}$Antimicrobial Photodynamic Therapy for Periodontitis$^{\circ}{\pm}$ caused hemorrhage to similar extents to conventional treatment modalities, where scaling and root planing are solely performed, in patients with periodontitis who are expected to have a lower degree of treatment response to non-surgical or surgical periodontal therapies (implant or refractory periodontitis) and those where there is a concern for the possible occurrence of antimicrobial side effects or resistance. This indicates that there are no problems with its safety. But there were no consistent reports about the effects of the additional use of photodynamic therapy. This led to a decision that the safety and efficacy of the current technology deserve further studies (Recommendation rating of A, Classification of technology II-a).

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.884-892
• /
• 2020

Corticosterone is known as a biological stress index in many species including birds. Feather corticosterone concentration (FCC) has increasingly been used as a measure for chronic stress status in broiler chickens. As sample preparation is the first step of analytical process, different techniques of feather matrix disruption need to be validated for obtaining better result in analysing corticosterone extraction. The current study was a validation of pulverizing the feather by bead beater (BB) and surgical scissors (SS) processing prior to corticosterone extraction in feather of broiler chickens. The type of feather processing prior to the hormone extraction may alter the final output. Thereby, finding a standard method according to laboratory facilities is pivotal. This study carried out to determine the effects of feather pulverization methods on the extraction amount of corticosterone in broiler chickens. Feathers were sampled from four weeks old Ross 308 broiler chickens (n = 12 birds). All broiler chickens were kept under the same environmental condition and had access to feed and water. Feather samples were assigned to one of the following processing methods 1) using a BB for pulverizing and 2) using a SS for chopping into tiny pieces. Each sample was duplicated into two wells during enzyme immunoassay (EIA) analysis to improve the accuracy of the obtained data. The results showed lower standard errors and constant output of FCC by using the BB method compared with the SS method. Overall comparison of FCC showed a significantly higher (p < 0.001) amount of the FCC in the BB compared with the SS. Overall, using the BB method is recommended over the SS method for feather processing due to the ability to homogenize a large number of samples simultaneously, ease of use and greater extraction of feather corticosterone.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.175-179
• /
• 2016

Recent advances in technology of medical image have made surgical simulation that is helpful to diagnosis, operation plan, or education. Improving and enhancing the medical imaging have led to the availability of high definition images and three-dimensional (3D) visualization, it allows a better understanding in the surgical and educational field. The Real human field of view is stereoscopic. Therefore, with just 2D images, stereoscopic reconstruction process through the surgeon's head, is necessary. To reduce these process, 3D images have been used. 3D images enhanced 3D visualization, it provides significantly shorter time for surgeon for judgment in complex situations. Based on 3D image data set, virtual medical simulations, such as virtual endoscopy, surgical planning, and real-time interaction, have become possible. This article describes principles and recent applications of newer imaging techniques and special attention is directed towards medical 3D reconstruction techniques. Recent advances in technology of CT, MR and other imaging modalities has resulted in exciting new solutions and possibilities of shoulder imaging. Especially, three-dimensional (3D) images derived from medical devices provides advanced information. This presentation describes the principles and potential applications of 3D imaging techniques, simulation and printing in shoulder and elbow practice.