• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.708-713
• /
• 2010

In this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.757-758
• /
• 2010

At the time of medical treatment and surgical operation, halogen lamp and plasma lamp were mainly used as luminous source for lighting. These two luminous sources have drawbacks that the life of lamps are not long, various problems are brought about due to excessive heat generation and its volume is very big because of cooling device. Accordingly, in this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance LED for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.1
• /
• pp.105-109
• /
• 2001

Lymphangioma is a rare benign developmental vascular tumor that may be found in orbit, skull and elsewhere in head and neck. Few cases of extension of this benign but insidious tumor posteriorly out of the bony orbital cavity have been reported. The patient was 40-year-old man complaining of proptosis of right eye for one month. Physical examination revealed severe right exophthalmus, impairment of eyeball movement in all directions. Visual acuity was much impaired and he could percept only light with right eye. CT and MRI scans showed intraconal and extraconal involvement of ill-defined, heterogenous mass with extension of the tumor posteriorly beyond the orbital cavity involving right frontal and temporal lobe, skull and subcutaneous tissue. The tumor was subtotally removed via orbito-frontal approach without damaging vital neural and orbital component. Then, orbital roof reconstruction and cranioplasty were done with resin. Successful surgical removal of lymphangioma is very difficult due to its severe infiltration to surrounding tissue and tendency to bleed during debulking. We report a rare case of orbital cavernous lymphangioma with intracranial extension treated with surgical decompression, with review of literatures.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.4
• /
• pp.495-504
• /
• 2021

Three-dimensional printing (3DP) applications possess substantial versatility within surgical applications, such as complex reconstructive surgeries and for the use of surgical resection guides. The capability of constructing an implant from a series of radiographic images to provide personalized anatomical fit is what makes 3D printed implants most appealing to surgeons. Our objective is to describe the process of integration of 3DP implants into the operating room for spinal surgery, summarize the outcomes of using 3DP implants in spinal surgery, and discuss the limitations and safety concerns during pre-operative consideration. 3DP allows for customized, light weight, and geometrically complex functional implants in spinal surgery in cases of decompression, tumor, and fusion. However, there are limitations such as the cost of the technology which is prohibitive to many hospitals. The novelty of this approach implies that the quantity of longitudinal studies is limited and our understanding of how the human body responds long term to these implants is still unclear. Although it has given surgeons the ability to improve outcomes, surgical strategies, and patient recovery, there is a need for prospective studies to follow the safety and efficacy of the usage of 3D printed implants in spine surgery.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.115-124
• /
• 2013

Recently, there have been improvements in diagnostic methods for the assessment of early caries lesions. The reason is that dental professionals are seeking methods to reliably detect incipient dental caries and to remineralize them. This review examines the literature on principles, theoretical background, and history of the Quantitative Light-Induced Fluorescence (QLF) system (Inspektor Research Systems BV, The Netherlands). Furthermore, this paper discusses the potential application of QLF system to clinical practice for educational purpose, enabling dental hygiene students to perform oral health assessment using the QLF system. In addition, the clinical application of QLF system can motivate patients by providing additional visual information about caries and bacterial activity. The evidences on validity and reliability of the QLF system for detection of longitudinal changes in de/remineralization and caries were examined. The QLF system is capable of monitoring and quantifying mineral changes in early caries lesions. Therefore, it can be used to assess the impacts of caries preventive measures on the remineralization and reversal of the caries process. And the QLF system is a very promising equipment to assess educational effectiveness for dental hygiene students in their learning process. In conclusion, the QLF system is the most effective technology for more sensitive staging of caries and treatment without surgical intervention.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.456-458
• /
• 2004

Recent medical robot systems perform surgery operations, by following the preplanned trajectory and surgical procedures. Depending on the complexity of surgery operations, they are operated in manual, semi-automatic or full automatic mode. To improve the performance of those medical robot systems, development of the simulator and more advanced auto-illumination system, in which intensity of light, direction and focal point can be controlled automatically according to the varied environments during surgical operations. are required. Therefore, in this paper, the simulator for SPINEBOT system which is a computer-intergrated robotic surgery system are developed. And further, an auto-illumination system which will be integrated to the SPINEBOT system is investigated and its preliminary design is described.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.65-70
• /
• 2010

Large oro-facial defects result from cancer treatment consequences in serious functional as well as cosmetic deformities. Acceptable cosmetic results usually can be obtained with a facial prosthesis. However, retention of a large facial prosthesis can be challenging because of its size and weight. This article describes prosthetic rehabilitation of a 57-year-old man having a right lateral mid-facial defect with intraoral-extraoral combination prosthesis. A modified technique to fabricate a hollow substructure in heat-polymerizing polymethyl-methacrylate to support silicone facial prosthesis was illustrated. The resultant facial prosthesis was structurally durable and light in weight facilitating the retention with magnets satisfactorily. This technique is advantageous as there is no need to fabricate the whole prosthesis again in case of damage of the silicone layer because the outer silicone layer can be removed and re-packed on the substructure if the gypsum-mold is preserved.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.245-248
• /
• 1997

Operative interventions for the management of osteonecrosis of the femoral head (ONFH) include core drilling, with or without vascularized fibular bone grafting. Nevertheless, their clinical results have not been consistently satisfactory. Recently, a new surgical procedure that incorporates cementation with polymethylmethacrylate (PMMA) after core drilling has been tried clinically. In this study, a biomechanical analysis using a finite element method(FEM) was undertaken to evaluate surgical methods and their underlying surgical parameter. Our finite element models included five types. They were (1) normal model (Type I), (2) necrotic model (Type II), (3) core decompressed model (Type III). (4) fibular bone grafted model (Type IV), and (5) cemented with PMMA model (Type V). The geometric dimensions of the femur were based on digitized CT-scan data of a normal person. Various physiological loading conditions and surgical penetration depths by the core were used as mechanical variables to study their biomechanical contributions in stress transfer within the femoral head region. In addition. the peak von Mises stress(PVMS) within the necrotic cancellous bone of the femoral head was obtained. The fibular bone grafted method and cementation method provided optimal stress transfer behaviors. Here. substantial increase in the low stress level was observed when the penetration depth was extended to 0mm and 5mm from the subchondral region. Moreover, significant decrease in PVMS due to surgery was observed in the fibular bone grafted method and the cementation method when the penetration depths were extended up to 0 and 5mm from the subchondral region. The drop in PVMS was greater during toe-off than during heel-strike (57% vs. 28% in Type IV and 49% vs. 22% in Type V). Both the vascularized fibular bone grafting method (Type IV) and the new PMMA technique (Type V) appear to be very effective in providing good stress transfer and reducing the peak Von-Mises stress within the necrotic region. Overall results show that fibular bone grafting and cementation methods are quite similar. In light of above results, the new cementation method appears to be a promising surgical alternative or the treatment of ONFH. The use of PMMA for the core can be less prone to surgical complication as opposed to preparation of fibular bone graft and can achieve more immediate fixation between the core and the surrounding region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.175-178
• /
• 2017

The relative position of the eyeballs in the orbit can be a criterion for estimating multiple pathological conditions. Especially, it is useful to diagnose orbital fracture, thyroid eye disease, orbital tumor, and to evaluate the result of drug and surgical treatment. The Hertel and the Naugle exophthalmometer, which are typical measuring instruments used mainly to measure the protrusion of the eye, are inevitably error by the measurer. In this paper, we propose a method to increase the accuracy and repeatability of the measurement of eyeball exophthalmometric values by using a white light interferometer.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.2
• /
• pp.495-508
• /
• 1995

The purpose of this study was to determine the effects of high voltage pulsed current (HVPC) stimulation on wound healing. Thirty-four Sprague-Dawley adult female rats were assigned to experimental and control groups. Each rats were anesthetized with pentotal sodium, and a 10 mm full-thickness incision was made on the back. From 24 hours after surgery, the rats of experimental groups were stimulated with HVPC, $140{\mu}s$, 120 pps, 30-40 V for 30 minutes, daily. The rats were sacrified 2 days, 4 days and 6 days after stimulation, respectively. The skin was removed, and processed for light microscopic examination. The length of incisional wounds were measured by microcaliper, and nucleolar organizer regions were counted under light microscope. For the histological observations the specimens were stained with Hematoxylin and Eosin, Masson Trichrome, Gomori Reticulum and Ag-NOR. There was a significant decrease in the length of incisional wound in experimental group compared with control group at 6 days HVPC stimuation (p<0.05). In experimental group, wound were significant difference (p<0.01) between the duration of post surgery. The mean numbers of nucleolar organizer regions per nucleus were significantly increased in the experimental group at 6 days HVPC stimulation (p<0.05), and were significantly difference (p<0.01) between the duration of post surgery in experimental group. Histological examination of the wound site suggested a more rapid of epithelialization and collagen formation between experimental groups compared with control groups. The result may indicated that the HVPC with $140{\mu}s$, 120 pps, 30-40 V for 30 minutes promoted surgical wound healing in the rat.