• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.205-216
• /
• 1994

The goal of periodontal therapy is the regeneration of the periodontium lost by periodontal disease. The purpose of this study was to evaluate the regenerative potential of the autogenous bone graft and guided tissue regeneration in the treatment of periodontal bony defect in dogs. Experimental periodontitis were induced in the mandibular left 3rd premolar and right 3rd and 4th premolars of 5 dogs using orthodontic ligature wire. After 6 weeks, the ligature wire removed, surgical procedure were performed as follows. 1) control group : Flap operation(Mn.Lt 3rd premolar) 2) experimental group I : Flap operation + autogenous bone graft (Mn.Rt. 3rd premolar) 3) experimental group II : Flap operation + Gore-Tex membrane (Mn.Rt. 4th premoalr) Thereafter, dogs were sacrificed on the 1,2,4,8,16th week and the specimens were prepared and stained with hematoxyline-eosin stain for the light microscopic examination. The results of this study were as follows. 1. The apical migration of junctional epithelium was most remarkable in the flap operation and the experimental group II was less than the experimental group I. 2. In the formation of new alveolar bone, it was found in experimental group I,II and experimental group I is more than II. In the control group, few bone formation was found. 3. In the formation of new cementum, it was found in experimental group I,II and experimental group II is more than I. So, the periodontal therapy combined with autogenous and guided tissue regeneration will be produce the periodontal regeneration.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.422-441
• /
• 1993

The purpose of this study was to compare effects of the bioceramics on healing processes of the alveolar bone defects in dogs. Five adult dogs aged 1 to 2 years were used in this study. Experimental alveolar bone defects were created surgically with a #1/2 round bur at the furcation area of the buccal surface of the mandibular 3rd, 4th premolars and 1st molar. Fifteen experimental alveolar bone defects were devided into three groups according to the type of graft materials. The groups were as follows : 1) flap operation with dense hydroxyapatite( DHA group ) 2) flap operation with porous hydroxyapatite( PHA group ) 3) flap operation with natural coral ( NC group ) At 1, 2, 4, 6, and 12 weeks, dogs were serially sacrificed and specimens were prepared with Hematoxylin-Eosin stain and Mallory stain for light microscopic evaluation. The results of this study were as follows : 1. In every group, inflammatory cell infiltrations were seen at 1st weeks due to surgical trauma, however inflammatory response owing to graft materials were not seen. 2. In every group, the appearance of connective tissue around graft materials was loosely formed at the initial stages, however the connective tissue was densely formed at 2 weeks. 3. The presence of osteocytes were observed at 2 weeks in the natural coral group, however the osteocytes were appeared at 6weeks in the dense hydroxyapatite group. 4. A new bone was formed from the base and walls of the defect and gradually expanded toward the graft materials. 5. A resorption of the natural coral occurred irregularly at the periphery of the material, therefore the size and shape of the natural coral were reduced at 6 weeks. 6. At 12 weeks, the porous hydroxyapatite and natural coral were surrounded by newly formed bone most completely, however dense hydroxyapatite was surrounded by newly formed bone in part.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.6
• /
• pp.327-331
• /
• 2015

Bisphosphonate-related osteonecrosis of the jaw (BRONJ) occurs mainly in female patients. In males the occurrence rate is low, which seems to be related to the low incidence of osteoporosis in men. Unfortunately, BRONJ tends to be ignored in general dental clinics in male patients with a history of osteoporosis treatment. BRONJ occurred in a male patient due to the clinician's lack of interest in the patient's history. In this case, the male patient was on bisphosphonate therapy because of a orchiectomy, and a dental treatment was performed without consideration of his medical history, resulting in BRONJ. We performed careful examinations and treatment with antibiotics and surgical operations. The postoperative healing was successful. In light of this particular case, we concluded that careful listening to the patient's history is very important.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.123-132
• /
• 2000

The field of maxillofacial prosthetics is concerned with the prosthetic reconstruction of missing head and neck tissue. Currently, facial prostheses are usually applied in cases of defects caused by the surgical removal of tumors or congenital defects. While silicone has been most widely used for the reconstruction of missing maxillofacial defects, it does not have ideal physical properties. Therefore, bonding a thin polyurethane sheet to silicone prostheses was recommended. In this case skin adhesives were used for the retention of maxillofacial prostheses. But retention of devices has always been problematic. The contributions of implants can be made to solve these problems. Implants have reduced the need for adhesive use, simplifying cleaning procedures and thus extending the life of the prostheses. For implant-retained prostheses, retentive matrix is necessary to hold attachments and/or magnets. The retentive matrix is usually fabricated with autopolymerizing acrylic resin or visible light- polymerized resin. The purpose of this study was to compare the adhesion-in-peel force of silicone adhesive to autopolymerizing acrylic resin and polyurethane sheet with two different surface textures : pumice polish only or retention groove, and three surface primers : Dow corning 1205 primer or Dow corning S-2260 primer or FactorII A-304 primer, and two polymerization methods : room temperature or dry heat oven. The t-peel bond strength of specimens was determined as described in ASTM Standard D1876-72. The results were statistically analyzed using the ANOVA test, multiple range test and t-test The results were as follows. 1. The t-peel bond strength of A-304 primer was the highest and statistically higher than that of S-2260(p<0.05). 2. The t-peel bond strength of specimens with retention groove was statistically higher than that of specimens polished with pumice(p<0.05). 3. The t-peel bond strength of specimens polymerized in dry heat oven was statistically higher than that of specimens in room temperature(p<0.01).

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.235-239
• /
• 2010

In this study, we have fabricated two types of non-invasive fiber-optic respiration sensors that can measure respiratory signals during magnetic resonance (MR) image acquisition. One is a nasal-cavity attached sensor that can measure the temperature variation of air-flow using a thermochromic pigment. The other is an abdomen attached sensor that can measure the abdominal circumference change using a sensing part composed of polymethyl-methacrylate (PMMA) tubes, a mirror and a spring. We have measured modulated light guided to detectors in the MRI control room via optical fibers due to the respiratory movements of the patient in the MR room, and the respiratory signals of the fiber-optic respiration sensors are compared with those of the BIOPAC$^{(R)}$ system. We have verified that respiratory signals can be obtained without deteriorating the MR image. It is anticipated that the proposed fiber-optic respiration sensors would be highly suitable for respiratory monitoring during surgical procedures performed inside an MRI system.

• Genomics & Informatics
• /
• v.13 no.2
• /
• pp.45-52
• /
• 2015

Acute myeloid leukemia is a well characterized blood cancer in which the unnatural growth of immature white blood cell takes place, where several genes transcription is regulated by the micro RNAs (miRNAs). Argonaute (AGO) protein is a protein family that binds to the miRNAs and mRNA complex where a strong binding affinity is crucial for its RNA silencing function. By understanding pattern recognition between the miRNAs-mRNA complex and its binding affinity with AGO protein, one can decipher the regulation of a particular gene and develop suitable siRNA for the same in disease condition. In the current work, HOXA9 gene has been selected from literature, whose deregulation is well-established in acute myeloid leukemia. Four miRNAs (mir-145, mir-126, let-7a, and mir-196b) have been selected to target mRNA of HOXA9 (NCBI accession No. NM_152739.3). The binding interaction between mRNAs and mRNA of HOXA9 gene was studied computationally. From result, it was observed mir-145 has highest affinity for HOXA9 gene. Furthermore, the interaction between miRNAs-mRNA duplex of all chosen miRNAs are docked with AGO protein (PDB ID: 3F73, chain A) to study their interaction at molecular level through an in silico approach. The residual interaction and hydrogen bonding are inspected in Discovery Studio 3.5 suites. The current investigation throws light on understanding of AGO-assisted miRNA based gene silencing mechanism in HOXA9 gene associated in acute myeloid leukemia computationally.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.485-497
• /
• 2017

Surgical treatment of the degenerative disc disease has evolved from traditional open spine surgery to minimally invasive spine surgery including endoscopic spine surgery. Constant improvement in the imaging modality especially with introduction of the magnetic resonance imaging, it is possible to identify culprit degenerated disc segment and again with the discography it is possible to diagnose the pain generator and pathological degenerated disc very precisely and its treatment with minimally invasive approach. With improvements in the optics, high resolution camera, light source, high speed burr, irrigation pump etc, minimally invasive spine surgeries can be performed with various endoscopic techniques for lumbar, cervical and thoracic regions. Advantages of endoscopic spine surgeries are less tissue dissection and muscle trauma, reduced blood loss, less damage to the epidural blood supply and consequent epidural fibrosis and scarring, reduced hospital stay, early functional recovery and improvement in the quality of life & better cosmesis. With precise indication, proper diagnosis and good training, the endoscopic spine surgery can give equally good result as open spine surgery. Initially, endoscopic technique was restricted to the lumbar region but now it also can be used for cervical and thoracic disc herniations. Previously endoscopy was used for disc herniations which were contained without migration but now days it is used for highly up and down migrated disc herniations as well. Use of endoscopic technique in lumbar region was restricted to disc herniations but gradually it is also used for spinal canal stenosis and endoscopic assisted fusion surgeries. Endoscopic spine surgery can play important role in the treatment of adolescent disc herniations especially for the persons who engage in the competitive sports and the athletes where less tissue trauma, cosmesis and early functional recovery is desirable. From simple chemonucleolysis to current day endoscopic procedures the history of minimally invasive spine surgery is interesting. Appropriate indications, clear imaging prior to surgery and preplanning are keys to successful outcome. In this article basic procedures of percutaneous endoscopic lumbar discectomy through transforaminal and interlaminar routes, percutaneous endoscopic cervical discectomy, percutaneous endoscopic posterior cervical foraminotomy and percutaneous endoscopic thoracic discectomy are discussed.

• Korean Journal of Clinical Oncology
• /
• v.14 no.2
• /
• pp.89-94
• /
• 2018

Purpose: To investigate the relationship between MUC expression and clinicopathologic factors in advanced gastric cancer. Methods: A total of 237 tumor specimens were assessed for MUC expression by immunohistochemistry. The clinicopathologic factors were investigated with MUC1, MUC2, MUC5AC, and MUC6. Results: MUC1, MUC2, MUC5AC, and MUC6 expression was identified in 148 of 237 (62.4%), 141 of 237 (59.5%), 186 of 237 (78.5%), and 146 of 237 (61.6%) specimens, respectively. MUC1 expression was correlated with age, human epidermal growth factor receptor 2 (HER2) status, lymphatic invasion, Lauren classification and histology. Further multivariate logistic regression analysis revealed a significant correlation between MUC1expression and lymphatic invasion, diffuse type of Lauren classification. MUC5AC expression was correlated with HER2 status, Lauren classification and histology. Further multivariate logistic regression analysis revealed a significant correlation between MUC5AC expression and HER2 status, diffuse and mixed type of Lauren classification. MUC2 and MUC6 expression were not correlated with clinicopathologic factors. The patients of MUC1 expression had poorer survival than those without MUC1 expression, but MUC2, MUC5AC or MUC6 were not related to survival. In an additional multivariate analysis that used the Cox proportional hazards model, MUC1 expression was not significantly correlated with patient survival independent of age, N-stage, and venous invasion. Conclusion: When each of these four MUCs expression is evaluated, in light of clinicopathologic factors, MUC1 expression may be considered as a prognostic factor in patients with advanced gastric cancer. Therefore, careful follow-up may be necessary because the prognosis is poor when MUC1 expression is present.

• Archives of Plastic Surgery
• /
• v.48 no.3
• /
• pp.323-328
• /
• 2021

Background Lymphaticovenular anastomosis (LVA) is a minimally invasive surgical procedure used to treat lymphedema. Volumetric measurements and quality-of-life assessments are often performed to assess the effectiveness of LVA, but there is no method that provides information regarding postoperative morphological changes in lymphatic vessels and veins after LVA. Photoacoustic lymphangiography (PAL) is an optical imaging technique that visualizes the distribution of light-absorbing molecules, such as hemoglobin or indocyanine green (ICG), and provides three-dimensional images of superficial lymphatic vessels and the venous system simultaneously. In this study, we performed PAL in lymphedema patients before and after LVA and compared the images to evaluate the effect of LVA. Methods PAL was performed using the PAI-05 system in three patients (one man, two women) with lymphedema, including one primary case and two secondary cases, before LVA. ICG fluorescence lymphography was performed in all cases before PAL. Follow-up PAL was performed between 5 days and 5 months after LVA. Results PAL enabled the simultaneous visualization of clear lymphatic vessels that could not be accurately seen with ICG fluorescence lymphography and veins. We were also able to observe and analyze morphological changes such as the width and the number of lymphatic vessels and veins during the follow-up PAL after LVA. Conclusions By comparing preoperative and postoperative PAL images, it was possible to analyze the morphological changes in lymphatic vessels and veins that occurred after LVA. Our study suggests that PAL would be useful when assessing the effect of LVA surgery.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.6
• /
• pp.467-475
• /
• 2022

Objectives: This study aimed to understand the definitions, types, and principles of computer-aided design/computer-aided manufacturing (CAD/CAM) and scanners due to the introduction of digital workflows. Methods: This study was based on information from the government's law and articles published in academic journals. Results: CAD/CAM is a technology that measures the shape three-dimensionally, saves it as data, designs it into the desired shape, and processes the product. Scanners, which are classified as intraoral and extraoral scanners, measure teeth and the intraoral environment three-dimensionally and convert them into three-dimensional (3D). A 3D printer is a machine that creates a 3D object by layering materials based on a 3D drawing. It can be classified into four types according to the method: extrusion, powder bonding, lamination, and photopolymerization methods. The most used 3D printer methods in dentistry are stereolithograhpy and digital light processing, and they are widely used in prosthetic, surgical, and orthodontic fields. Conclusions: As the dental system is digitized, it is expected that the government will classify the dental hygienist scope of work and the universities will reflect the curriculum; it is necessary to develop excellent dental hygienists, diversify the educational pathways, and establish policies to meet the needs of the increasing number of patients.