• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.421-426
• /
• 2015

This paper presents a hybrid single optical system for an LED surgical light that combines the advantages of both lens- and reflector-type single optical systems. The proposed hybrid single optical system includes a lens in the center and the LED light originating from the lens is redirected using a reflector to achieve a high beam spread. Iterative optical software simulations are used to provide data for the design of the lens and reflector for a single optical system, and for a complex optical system for the LED light assembly. The resulting data is also used to fabricate a prototype system. Experiments using the prototype of the hybrid single optical system and a mock-up LED surgical light confirm the system's shadow dilution performance and its applicability to surgical operations.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.452-457
• /
• 2011

The internal temperature of an operating room had to keep within $20^{\circ}C$. However, the doctor who is wearing operating gown and mask caused to rise temperature because of the thermal occurrence of dental LED light source. At first, the surgery environment is getting worse. And then last, it would increase bleeding rate by the expansion of patient's exposured blood vessel. A surgical operator can distribute the patient's tissue through such surgery environment, exactly. It can do accurate surgery. So, it gave to effect that surgical operator's eye condition is getting better and it could keep a mutual assistance system. For this research, we develop the LED dental light source module of high color rendition. It performed simulation for replacing established the method of Halogen lamp and Plazma lamp of light source. We analyzed intensity of illumination and the change of viability by changing the height of light source module.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1111-1117
• /
• 2011

We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has produced for use in mobile that can be driven at low voltage. In addition, it was also possible to implement a variety of colors from monochromatic Light to polychromatic light using by PWM control method and were available 32,768.

• The Journal of Korea Robotics Society
• /
• v.7 no.4
• /
• pp.267-275
• /
• 2012

When using commercialized robot assisted laparoscopic, surgeon has met some problems to depend only on image of the surgical field. To solve it, there were various researches. The previous study showed that it is possible to estimate the operation force on the commercialized instrument inside patient without sensors. To apply the estimated force to a haptic master console for the laparoscopy surgical robot system, the light haptic master console should be designed. This paper suggests the design of lighter master console handle to reduce a weight of the console whose structure can match with the joint and DOF of an instrument. A cable-conduit mechanism is designed to make light structure to perform a delicate manipulation. The cable-conduit mechanism removes the weight and inertia of link caused by haptic actuator and encoder which is separated from handle link of a manipulator.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.256-262
• /
• 2019

Extensive tumor resection accompanied by radiotherapy and chemotherapy is the standard of care for malignant gliomas. However, there is a significant obstacle to the complete resection of the tumor due to the difficulty of distinguishing tumor and normal brain tissue with a conventional surgical microscope. Recently, multiple studies have shown the possibility of fluorescence-guided surgery in malignant gliomas. The most used fluorescence dyes for brain tumor surgery are 5-aminolevulinic acid (5-ALA) and indocyanine green (ICG). In this paper, a new fluorescence guided operation system, which can detect both 5-ALA and ICG fluorescent images simultaneously, is presented. This operation system consists of light emitting diodes (LEDs) which emits 410 nm and 740 nm wavelengths. We have performed experiments on rats in order to verify the operation of the newly developed operation system. Oral administration and imaging were performed to observe the fluorescence of 5-ALA and ICG fluorescence in rats. When LEDs at wavelengths of 410 nm and 740 nm were irradiated on rats, 628 nm wavelength with a violet fluorescence color and 825 nm wavelength with a red fluorescence color were expressed in 5-ALA and ICG fluorescent material, respectively, thus we were able to distinguish the tumor tissues easily. Previously, due to the poor resolution of the conventional surgical microscope and the fact that the color of the vein is similar to that of the tumor, the tumor resection margin was not easy to observe, thus increasing the likelihood for cancer recurrence. However, when the tumor is observed through the fluorescence guided operation system, it is possible to easily distinguish the color with the naked eye and it can be completely removed. Therefore, it is expected that surgical removal of cancerous tumors will be possible and surgical applications and surgical microscopes for cancer tumor removal surgery will be promising in the future.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1015-1016
• /
• 2006

The important parameters deciding the fluctuation of Accumulation style surgical operation of ventriculus laser beam are smoothing capacitor, frequency and he characteristics of laser resonator. In this thesis, we control the fluctuation of medical $CO_2C$ laser in realtime by changing Duty-Ratio of IGBT and switching frequency with fixed the smoothing capacitor to improve the fluctuation of laser beam. We detect the light on laser resonator using a CdS photo sensor to improve ripple factor of laser beam and feedback fluctuated signals refined by a band pass filter into the control circuit to stabilize fluctuation actively. There is much to be desired in the realtime controlling technique of the light on Accumulation style surgical operation of ventriculus laser discharge tube in electrical signal. We propose switching control technique with microprocessor and photo sensing technique by controlling switch devices optimum operation and feedback signals detected by a photo sensor into the laser power supply in order to improve ripple factor of the $CO_2$ laser beam.

• The Journal of the Korean dental association
• /
• v.49 no.8
• /
• pp.443-450
• /
• 2011

The leading paradigm of dentistry had been focused on the rehabilitation treatment that identifies active caries, manages them surgically, and restores their original functions. However, changes in the external environment including the current disease prevalence require dentistry to have a paradigm shift. The new paradigm suggests the detection of caries in their earlier stages over the visual diagnosis of cavities, and the reversal of the incipient caries by non-surgical approach. For this to be achieved, a high-technology detection device recognizing changes in the earlier stages which can not he visually observed is needed. Development of early caries detection device has recently become a major issue in preventive dentistry on account of this need, and QLF(Quantitified Light induced Fluorescence) conspicuously stands out among the newly released devices. In this study, the fundamental concept of QLF(Quantitified Light induced Fluorescence) and the possible clinical applications of the earlier intraoral camera model as well as the recently designed digital camera model will be discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2679-2691
• /
• 2012

In this paper, a high accuracy stereo reconstruction method for surgery instruments positioning is proposed. Usually, the problem of surgical instruments reconstruction is considered as a basic task in computer vision to estimate the 3-D position of each marker on a surgery instrument from three pairs of image points. However, the existing methods considered the 3-D reconstruction of the points separately thus ignore the structure information. Meanwhile, the errors from light variation, imaging noise and quantization still affect the reconstruction accuracy. This paper proposes a method which takes the structure information of surgical instruments as constraints, and reconstructs the whole markers on one surgical instrument together. Firstly, we calibrate the instruments before navigation to get the structure parameters. The structure parameters consist of markers' number, distances between each markers and a linearity sign of each instrument. Then, the structure constraints are added to stereo reconstruction. Finally, weighted filter is used to reduce the jitter. Experiments conducted on surgery navigation system showed that our method not only improve accuracy effectively but also reduce the jitter of surgical instrument greatly.

• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.43-48
• /
• 2015

We studied on the injection molding conditions of defect-free PMMA lens for surgical light. When the heat temperature of mold is low, more imperfect molding or weldlines and flow marks have showed. A defective lens depends on low fluidity of the PMMA resin and its temperature is high, a flexural strain has occurred. The longer cooling time of specimens, the more cracks have occurred due to resin crystallization. In this study, optimal molding conditions for defect-free PMMA lens is as follows. The heat temperature of core mold was 110 [$^{\circ}C$] and also the cooling time was 25 [sec]. PMMA materials can realized low expense to produce plastic optical lens and applications.

• Journal of Yeungnam Medical Science
• /
• v.19 no.2
• /
• pp.126-135
• /
• 2002

Background: Neovascular glaucoma is common secondary glaucoma at high risk for failure of glaucoma filtering surgery. Recently, trabeculectomy with adjunctive mitomycin C trabeculectomy has been tried to improve the surgical success rate of conventional trabeculectomy. But, the long-term effects of mitomycin C trabeculectomy for neovascular glaucoma are unknown. Thus, we evaluated the long-term effects of mitomycin C trabeculectomy and its prognostic factors influencing the outcome. Materials and Methods: Medical records of 62 eyes of 55 neovascular glaucoma who had undergone mitomycin C trabeculectomy were retrospectively reviewed. Surgical success was defined as intraocular pressures of 21 mmHg or less with or without glaucoma medications and no loss of light perception. Surgical failure was defined as postoperative loss of light perception in patients with preoperative vision better than light perception, additional glaucoma surgery, or phthisis bulbi in patients with preoperative vision of no light perception. Results: Postoperative success was obtained in 37 (60%) out of 62 eyes after mean followup period of $23.9{\pm}16.2$ months. Using Kaplan-Meier survival analysis, cumulative success rate at the 6-, 12-, 24- and 36-month intervals were 85%, 71%, 57% and 52%, respectively. Success rate was greater in eyes with diabetic retinopathy than other causes(p=0.005) and in eyes with preoperative panretinal photocoagulation(PRP) than without PRP(p=0.015). However, Cox proportional hazard regression analysis revealed that preoperative PRP was not a significant risk factor for surgical failure. Conclusion: Prognosis of neovascular glaucoma caused by diabetic retinopathy was better than that caused by the other disorders following mitomycin C trabeculectomy. The author would suggest that mitomycin C trabeculectomy could be effective and relatively safe as the first procedure of choice before performing glaucoma drainage device implantation or cyclodestructive procedure.