• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.177-187
• /
• 2011

This study was performed to evaluate the polymers and surfactants as the potential control agents of sweet potato whitefly Bemisia tabaci, which is causing problems in ornamental garden and greenhouse. Polymers have an insecticidal activity to knock down and to be lethal to small winged insects by its viscosity. Among five polymers tested at 0.2% concentration, polinol P-24 showed the highest insecticidal activity as 59.4% against B. tabaci adult in cylindrical chamber, and followed by polinol P-20 (insecticidal activity, 57.1%). When treated at 0.1 % or 0.3% concentrations, Polinol P-24 also showed the highest insecticidal activity with 43.3% and 54.5%, respectively. Among eight surfactants tested, insecticidal activity was the highest in 0.0005% NP10 treatment (70.0%), and followed by 0.001% NP7 (67.4%). The synergistic effect between polinol P-24 and eight surfactants was evaluated. After bioassays, the 0.2% polinol P-24 plus 0.005% NP10 was selected as a candidate control agent for controlling of B. tabaci adults. Polinol P-24/NP10 was showed the highest control efficacy against B. tabaci adults applied three times at three day-intervals in square rearing cage. In the greenhouse, the mixture treatment showed good control value over 70% seven days after treatment.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.276-283
• /
• 2008

Kind of monomer(MMA, EA, BA, St)and the monomer ratio(80/20 to 20/80) where changed in the preparation of the core shell binder, and property was improved the plasma processing. Each material changed by plasma treatment time($1{\sim}10\;s$) to change to measure the tensile strength, contact angle and adhesion peel strength for the core shell binder optimal conditions for handling the output of the surface treatment. The type of polymerization and composition of the binder is a regardless initiator of APS, the reaction temperature of $85^{\circ}C$ to 0.3 wt% of the surfactant used to indicate when the conversion rate was the highest, core shell composite particle binder got two glass temperature curves. Core shell binder after the plasma processing contact angle change is the PEA/PSt 38 percent of cases within five seconds to indicate slight decrease was a decline rapidly if not handled $0^{\circ}$ to reach. Tensile strength PSt/PMMA varies $46.71{\sim}46.27\;kg_f$/2.5 cm and adhesion strength PEA/PMMA varies $7.89{\sim}14.44\;kg_f$/2.5 cm increases. Overall, adhesion strength of core shell composite particle is in the order of order PEA>PBA>PSt for shell monomer MMA.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.4
• /
• pp.241-247
• /
• 2008

Paclitaxel is a taxane diterpene amide, which was first extracted from the stem bark of the western yew, Taxus brevifolia. This natural product has proven to be useful in the treatment of a variety of human neoplastic disorders, including ovarian cancer, breast and lung cancer. Paclitaxel is a highly hydrophobic drug that is poorly soluble in water. It is mainly given by intravenous administration. Therefore, The pharmaceutical formulation of paclitaxel ($Taxol^{(R)}$; Bristol-Myers Squibb) contains 50% $Cremophor^{(R)}$ EL and 50% dehydrated ethanol. However the ethanol/Cremophor EL vehicle required to solubilize paclitaxel in $Taxol^{(R)}$ has a pharmacological and pharmaceutical problems. To overcome these problems, new formulations for paclitaxel that do not require solubilization by $Cremophor^{(R)}$ EL are currently being developed. Therefore this study utilized a supercritical fluid antisolvent (SAS) process for cremophor-free formulation. To select hydrophilic polymers that require solubilization for paclitaxel, we evaluated polymers and the ratio of paclitaxel/polymers. HP-${\beta}$-CD was used as a hydrophilic polymer in the preparation of the paclitaxel solid dispersion. Although solubility of paclitaxel by polymers was increased, physical stability of solution after paclitaxel/polymer powder soluble in saline was unstable. To overcome this problem, we investigated the use of surfactants. At 1/20/40 of paclitaxel/hydrophilic polymer/ surfactant weight ratio, about 10 mg/mL of paclitaxel can be solubilized in this system. Compared with the solubility of paclitaxel in water ($1\;{\mu}g/mL$), the paclitaxel solid dispersion prepared by SAS process increased the solubility of paclitaxel by near 10,000 folds. The physicochemical properties was also evaluated. The particle size distribution, melting point and amophorization and shape of the powder particles were fully characterized by particle size distribution analyzer, DSC, SEM and XRD. In summary, through the SAS process, uniform nano-scale paclitaxel solid dispersion powders were obtained with excellent results compared with $Taxol^{(R)}$ for the physicochemical properties, solubility and pharmacokinetic behavior.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.410-415
• /
• 2009

Hexagonal barium ferrite ($BaFe_{12}O_{19}$) nano-particles have been successfully synthesised using selfassembly method. Diethyleneamine (DEA) surfactant was used to fabricate the micelle structure of Ba-DEA complex under various DEA concentrations. $BaFe_{12}O_{19}$ powders were synthesized with addition Fe ions to Ba-DEA complex and then heat treated at temperature range of 800-1000${\circ}C$. The molar ratio of Ba/DEA and heat-treatment temperature significantly affected the magnetic properties and morphology of $BaFe_{12}O_{19}$ powders. $BaFe_{12}O_{19}$ powders synthesized with Ba/DEA molar ratio of 1 and heat-treated at 1000${\circ}C$ for 1 hour showed the coercive forces (iHc) of 4.84 kOe with average crystal size of about 200 nm.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.92-96
• /
• 1997

Nowadays, ceramides have been found to be an important component in the outermost layer of the skin - the stratum corneum. It is undersrood that ceramides play an important role in structure and maintenance of the interellular lipid lamella structure in the SC layer. Thus, many efforts have been made by the cosmetics and pharmaceutical industries to get human skin-identical ceramides or pseudoceramides which show similar performance with natural ceramides. The purpose of our study was to systhesize new pseudoceramides via an effective and economical systhetic pathway and to show their performance of skin restoratio. Four kinds of the new pseudoceramides were synthesized by the reaction of alcoholic amine and alkyl ketene dimer. First of all, PC-4 and PC-5 were synthesized by the reaction of 3-amino-1,2-propanidiol and serinol with alkyl ketene dimer respectively. After that, PC-4R and PC-5R were produced by changign kitone group at $\beta$-position to amide bond of above synthesized PC-4 and PC-5 into hydroxyl group using NaBH4 respectively. Their expected structures were conformed by the NMR, IR spectra, and elemental analysis. A study to show the restoration effectiveness was performed in which human skin was pretreated with high concentration of SDS surfactant solution. Using 0.5% solution of above synthesized pseudoceramides, there was the significantly faster restoration of the damaged than that of placebe itself treatment.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.3
• /
• pp.294-298
• /
• 2007

Pulmonary alveolar proteinosis is a rare disorder that is characterized by the abundant accumulation of surfactant-derived material within the alveolar spaces and distal bronchioles. Although the findings of homogenous ground-glass opacities overlaid by thickened septa, which form a "crazy paving" pattern on high-resolution computed tomography, can assist in making a diagnosis, a lung biopsy is usually required. This disorder has a variable clinical course, from spontaneous resolution to respiratory failure and death. While a whole lung lavage has been the standard treatment since the early 1960s, GM-CSF therapy has been attempted based on the recently suggested pathogenetic mechanism. We report a case of pulmonary alveolar proteinosis that resolved spontaneously after an open lung biopsy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.99-107
• /
• 2015

This study was aimed to investigate the difference in strength of Carbon Nanotube (CNT) reinforced cement mortars with different types of surfactants and doses. In the experimental program, CTAB, SDBS and TX10 which were common surfactants adopted to improve CNTs dispersion in fabricating CNT composites in many industrial fields were included and superplasticizer which was revealed to be effective to disperse CNTs especially in CNT reinforced cementitious composites were added as well. Superplasticizer presented less strength reduction in cement mortar and more strength gain by adding CNTs among four types of surfactants. Higher dosage of superplasticizer caused lower strength of cement mortar. Adding CNTs of 0.4 wt.% or less to cement didn't show strength enhancement by adding CNTs but 0.8 wt.% of CNTs resulted in strengthening effect after all. Finally, a combination of 0.1 wt.% of CNTs, superplasticizer and sonication treatment could lead to strength improvement by adding CNTs in cement mortar.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.3
• /
• pp.56-60
• /
• 2003

The optimal operation conditions of electrofloatation for oil-water separation of soil flushing effluent including electrolyte and pH were investigated. The reactor (200 ${\times}$ 10 ${\times}$ 15 cm) for the experiment was constructed by using acrylic plate. Diesel concentration was 1,000 mg/L in the 1 % mixed surfactant solution ($POE_5$: $POE_{14}$ 1: 1). Titanium coated electrode was used as cathode and stainless steel electrode as anode. Reaction time was 62 minutes (reaction time: 60 min., flotation time: 2 min.) and voltage was 6 V. The separation efficiency of electrofloatation was improved to 40% by electrolyte addition. Furthermore, NaCl (1N) added as electrolyte was showed enhanced efficiency compared to NaOH (1N). While, the effect of both NaCl and NaOH was sequentially increased in the range of 0.2∼1.0% (0.02∼0.1 M). The equilibrium time was found as 20 min. in the range of 0.4∼1.0% (0.04∼0.1M) for both of them.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.527-533
• /
• 2010

The pioglitazone loaded poly(lactide-co-glycolide)(PLGA) nanospheres were prepared by emulsion-evaporation method and optimized for particle size and entrapment efficiency. The optimized particles were 125~170 nm in size with narrow size distribution and showed above 85% entrapment efficiency at 30% of pioglitazone loading when prepared with 3% w/v of poly(vinyl alcohol) (PVA) as a surfactant. These particulate carriers exhibited a controlled in vitro release of pioglitazone for 40 days at a nearly constant rate. The pioglitazone loaded PLGA nanospheres were not only effective to reduce the blood sugar level of diabetic rats but also non-toxic for the animal body, in particular for sensitive organs like kidney, liver, heart, lung and spleen. These results indicate that PLGA nanospheres have a great potential for oral delivery of pioglitazone.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1207-1213
• /
• 2020

Aflatoxin B1 (AFB1) is a mycotoxin produced by Aspergillus flavus (A. flavus). AFB1 is reported to have high thermal stability and is not decomposed by heat treatment during food processing. Therefore, in this study, knowing that AFB1 is metabolized by cytochrome P450 (CYP), our aim was to develop a method to detoxify A. flavus-contaminated maize, under normal temperature and pressure, using Escherichia coli expressing human CYP3A4. First, the metabolic activity of AFB1 by recombinant human CYP3A4 was evaluated. As a result, we confirmed that recombinant human CYP3A4 metabolizes 98% of AFB1. Next, we found that aflatoxin Q1, a metabolite of AFB1 was no longer mutagenic. Furthermore, we revealed that about 50% of the AFB1 metabolic activity can be maintained for 3 months when E. coli expressing human CYP3A4 is freeze-dried in the presence of trehalose. Finally, we found that 80% of AFB1 in A. flavus-contaminated maize was metabolized by E. coli expressing human CYP3A4 in the presence of surfactant triton X-405 at a final concentration of 10% (v/v). From these results, we conclude that AFB1 in A. flavus-contaminated maize can be detoxified under normal temperature and pressure by using E. coli expressing human CYP3A4.