• Composites Research
• /
• 제35권2호
• /
• pp.80-85
• /
• 2022

본 연구에서는 항공기 방빙을 위해서 탄소계 소수성 입자인 탄소나노튜브의 코팅 횟수에 따른 테프론-폴리우레탄 탑코트의 나노입자 부착력과 표면 소수성 특성을 평가하기 위하여 실험을 진행하였다. 나노입자 부착력을 측정하기 위해서 인발접착시험을 진행하였고, 표면소수성 특성을 측정하기 위해서 정적접촉각 시험과 거칠기 평가를 진행하였다. 거칠기평가를 통하여 탄소나노튜브가 테프론-폴리우레탄 탑코트에 함침된 정도를 할 수 있었고, USB-현미경을 통하여 테프론-폴리우레탄 탑코트에 탄소나노튜브가 함침 및 분산정도를 확인하였다. 그 결과 코팅횟수가 많을수록 탄소나노튜브가 응집되고 이에 의하여 접착력이 감소한다는 것을 확인하였다. 실험결과 코팅 횟수에 따라 테프론-폴리우레탄의 소수성은 커지고 접착력은 감소하였다. 그로 인해 테프론-폴리우레탄 탑코트 와의 접착력 향상과 최적화된 소수성을 가지는 탄소나노튜브의 코팅횟수를 파악할 수 있었다.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.85-91
• /
• 2003

In this study, We have investigated leaching characteristics of heavy metals for recycled plastic composites containing EAF(Electric Arc Furnace) dust & EAF slag. EAF dust & EAF slag used that is generated in the 3 steel-making compaines in domestic. The physical and chemical properties of EAF dust & slag was examined by measuring specific surface area. porosity, oil absorption test and chemical wetting analysis etc. Results of total analysis indicated that EAF dust, slag contained significant amount of hazardous metals such as Cu, Pb, Cd and Cr. But, In the leaching test of the recycled plastic composites containing EAF dust, slag by Korean Standard Leaching Procedure, composites shows much lower leaching concentration of heavy metals. It was concluded that the recycled plastic composites containing EAF dust, slag showed good physical and chemical characteristics. This means that the EAF dust, slag can be effectively used as a functional filler.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.416-423
• /
• 2012

This paper introduces an effect of a preparing $ZrO_2$-Ag composite on its mechanical properties and microstructure. In present study, $ZrO_2$-Ag was prepared by reduction-deposition route and wetting dispersive milling method, respectively. Two type of Ag powders (nano Ag and micron Ag size, respectively) were dispersed into $ZrO_2$ powder during wetting dispersive milling in D.I. water. Each sample was sintered at $1450^{\circ}C$ for 2hr in atmosphere, and then several mechanical tests and analysis of microstructure were carried out by bending test, hardness, fracture toughness and fracture surface microstructure. As for microstructure, the Ag coated $ZrO_2$ showed homogeneously dispersed Ag in $ZrO_2$ in where pore defect did not appear. However, $ZrO_2$-nano Ag and $ZrO_2$-micro Ag composite appeared Ag aggregation and its pore defect, which carried out low mechanical property and wide error function value.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.22-28
• /
• 2013

$WS_2$ particles were added to micro-diamond blades with Cu/Sn binding metal as lubricants to improve cutting efficiency. It was found in previous works that the added $WS_2$ lubricant could reduce remarkably the momentary energy consumption during dicing tests but increased wear rate slightly owing to weak bonding between lubricant particles and bond metals. In the present work, the surface of $WS_2$ lubricant particles were etched for activating the surface of $WS_2$ particles that provide even distribution of particles during powder mixing process and improvement of wetting at the interfaces between $WS_2$ particles and molten Cu/Sn bond metals during pressurized sintering so that could provide the improved strength of micro-blades and result in extended life. Chipping behavior of workpiece with the types of micro-blades including $WS_2$ were compared because it is important in semiconductor and micro-packaging industries to control average roughness and straightness of sliced surface which is closely related with quality.

• 한국안광학회지
• /
• 제16권3호
• /
• pp.255-264
• /
• 2011

목적: 인공눈물, 렌즈용 다목적 용액, 화장품, 근골격계 용제에 널리 사용되고 있는 히알루론산(hyaluronic acid, HA)의 콘택트렌즈의 습윤성과 착용감에 대한 효과를 알아보기 위해 HA가 첨가된 콘택트렌즈(+HA)와 HA가 첨가되지 않은 렌즈(-HA)를 임상 평가하여 비교하였다. 방법: 안질환이 없는 대학생 28명을 대상으로 하여 4주 동안 우안에는 HA가 첨가된 렌즈(+HA, With HA)를 좌안에는 HA가 첨가되지 않은 렌즈(-HA, Without HA)를 착용하여, 좌안을 대조군으로 우안을 비교하였다. 이 때, 렌즈 도수는 등가구면으로 처방하고, 자동굴절검사기를 이용해 덧댐굴절검사를 한 뒤 2주와 4주 동안 렌즈 착용 후 눈물검사, 전안부 검사, 피팅 용이성 평가, 표면 습윤성 검사, 설문조사를 시행하였다. 결과: 히알루론산이 첨가된 렌즈(+HA)가 -HA 렌즈보다 우수한 습윤성을 보였으며, 눈물량은 +HA 렌즈 착용자에서는 4주 동안 차이가 크지 않았지만, -HA 렌즈 착용자에서는 4주가 되면서 눈물량이 줄어드는 결과를 보였다. +HA와 -HA 렌즈 착용자의 충혈정도는 차이를 보이지 않았으며, 렌즈 피팅은 +HA 렌즈에서 용이한 것으로 나타났다. 설문조사 결과에서 착용감, 습윤감, 세척의 용이성과 건조감은 +HA 렌즈가 -HA 렌즈에 비해 우수한 결과를 보였으나, 충혈정도와 렌즈 취급성은 차이가 적은 것으로 나타났다. 결론: 히알루론산이 첨가된 소프트콘택트렌즈(+HA)는 HA가 첨가되지 않은 소프트콘택트렌즈(-HA)에 비해 렌즈착용에 따른 표면 습윤성을 높임으로써 착용감을 증진시키는 것으로 사료된다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.791-797
• /
• 2002

This paper introduces the partial melting process for solder application and characterization of its feasibility using Sn-Ag, and Sn-Cu solder alloys. ill order to show that the liquid phase in the semi-liquid state maintains the similar wettability as single-phase liquid, the wetting balance tests are conducted with varying temperatures and compositions. Also, as a new soldering technology, the microstructural and mechanical test were investigated. The results from this research indicate that the partial melting can yield satisfactory sider joints as long as the liquid phase acquires sufficient chemical activity. At a condition where the partial melting is effective, a direct correlation between the wettability and the surface tension is found to exist.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.18-26
• /
• 2015

para-aramid fibers were treated by atmosphere air plasma to improve the interfacial adhesion. The wettability of plasma-treated aramid fiber was observed by means of dynamic contact angle surface free energy measurement. Surface roughness were investigated with the help of scanning electron microscopy and atomic force microscopy. The tensile test of aramid fiber roving was carried out to determine the effect of plasma surface treatments on the mechanical properties of the fibers. A pull-out force test was carried out to observe the interfacial adhesion effect with matrix material. It was found that surface modification and a chemical component ratio of the aramid fibers improved wettability and adhesion characterization. After oxygen plasma, it was indicated that modified the surface roughness of aramid fiber increased mechanical interlocking between the fiber surface and vinylester resin. Consequently the oxygen plasma treatment is able to improve fiber-matrix adhesion through excited functional group and etching effect on fiber surface.

• Carbon letters
• /
• 제2권1호
• /
• pp.27-36
• /
• 2001

The pack-cementation process is the method which is formed SiC coating layer to improve weak oxidation properties of CFRCs (carbon fiber-reinforced carbons). This method develops the anti-oxidation coating layer having no dimensional changes and good wetting properties. In this study to improve the oxidative resistance of the prepared 4D CFRCs, the surface of CFRCs is coated by SiC using pack cementation method. The mechanical properties of SiC-coated 4D CFRCs are measured by the 3-point bending test, and their ablation properties are investigated by the arc torch plasma test. From the results, it is found that both mechanical and ablation properties of SiC-coated 4D CFRCs are much better than bare CFRCs.

• 한국지반공학회논문집
• /
• 제32권5호
• /
• pp.37-48
• /
• 2016

본 연구는 실제 시공 환경에서 투수성 보도블록의 표면 유출 및 배수 특성을 알아보고자 하였으며, 표층 및 노반을 포함한 시편을 대상으로 불포화 상태에서 도심 내 우수 조건을 고려한 배수 실험을 진행하였다. 일정한 시간 간격을 두고 반복적인 배수 실험 및 공극 막힘 실험이 시행되었으며, 정량적 분석을 위하여 3D X-ray CT 이미지 분석 및 증발 실험을 시행하였다. 실험 결과, 시간 간격 동안 발생한 증발로 인해 공극 내 물이 공간적으로 재분포되어 표면 유출을 야기시키는 것으로 나타났다. 특히, 공기에 노출되어 있는 표층보다 시편 하부에 위치한 노반의 공극 변화가 투수성 보도블록의 배수, 증발 등 전체적인 수리학적 거동을 크게 저하시켰다. 또한 공극 내 침전물은 증발로 인한 변화를 증진 시키며, 이 때 저하된 배수 성능은 쉽게 회복되지 않는 것으로 나타났다. 그리고 선행우수조건에 의하여 배수 성능이 저감되면서 최대 표면 유출 높이가 증가하는 것으로 나타났다.

• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.13-22
• /
• 2006

Surface fog coating methods to porous pavements with a polymer, that contains MMA as a main ingredient, are being widely used in Japan and called 'Top-Coat Processes'. They have lots of effects such as to prevention of the pavement void choking, improvement of the water permeability of the pavements and so on. The purpose of this research is to show the characterization of the polymer to optimize the functions of the polymer fog-coat methods. This study focused on the difference of 'wetting' by water among polymers used for the fog coatings, and calculation the surface free energy from the water contact angle on each material. At the end, the water permeability test were conducted using porous asphalt mixtures that were coated with several kinds of polymers. The permeability was also measured on the specimens that were forcibly choked by muddy water and the resistance to choking was compared. It is concluded that the reduction of the surface free energy between water and a polymer improves the life of the permeability functions of porous pavements. Improvement of water permeation capacity and void-blocking controlling effects can be quantitatively evaluated using the interfacial tension ($\gamma$sl) with water for the coating material (high-viscosity asphalt and hardening resin binder). Consequently, the smaller the $\gamma$sl of the coating material the higher the water permeation capacity and void-blocking controlling effects of the porous asphalt pavements.