• 한국철도학회논문집
• /
• 제16권4호
• /
• pp.278-285
• /
• 2013

콘크리트궤도가 도입됨에 따라 토공노반에서의 잔류침하 억제가 중요한 사안으로 대두되고 있다. 파일슬래브구조는 침하억제공법으로서 슬래브는 성토하중을 분산하고 파일은 분산된 하중을 지지층까지 직접 전달시켜 충분히 지지력을 확보하여 침하를 방지한다. 철도노반에 적용시 하중전달특성은 매우 우수하지만, 주행하중에 대한 진동전달 및 상호작용에 대한 특성이 규명되지 않았다. 구조적 특성상 이동하는 열차하중에 의해 발생한 진동은 슬래브를 반사층으로 하여 상부성토체 내에서 다중반사되어 전파할 가능성이 있는데 이는 열차의 주행안정성과 승차감에 영향을 미칠 수 있다. 본 논문에서는 파일슬래브가 설치된 철도노반에서 열차 주행에 의해 발생되는 진동에너지의 전파특성을 평가하기 위하여 인공적인 충격하중과 고속열차의 실측하중을 사용하여 노반구조별 진동전파특성을 시간영역 및 주파수 영역에서 해석하였다. 검토 결과, 파일슬래브 구조에서의 진동 반사효과를 확인하였으며, 적정 성토고가 확보되는 경우에는 진동에 안정적이지만 성토고가 낮은 경우에는 저주파 영역의 진동에너지가 증가하는 것으로 나타났다.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1022-1027
• /
• 2005

An experimental study is conducted to investigate the characteristics of the ion wind generated by the electric field between a needle electrode and the parallel plate electrodes. The ion wind enhances heat and mass transfer between the surface and the surrounding gas. Moreover such enhancement makes no noise or vibration. This study is conducted to develop the electronic cooling device. The measured gas velocities and heat transfer coefficients are proportional to the applied voltage. The heat transfer coefficient can be increased as compared with a natural convection. The maximum enhancement of heat transfer obtained in this system is $47\%$ for 3 W in heat transfer rate.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1450-1457
• /
• 2003

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of durability, noise/vibration/harshness (NVH), crashworthiness and passenger safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer. In this study, we used the Virtual Proving Ground (VPG) approach for obtaining the dynamic stress or strain history and distribution. The VPG uses a nonlinear, dynamic, finite element code (LS-DYNA) which expands the application boundary outside classic linear, static assumptions. The VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic stress and fatigue critical region, a single bump run test, road load simulation, and field test have been performed. The prediction results were compared with experimental results, and the feasibility of the integrated life prediction methodology was verified.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.95-103
• /
• 2007

This paper presents a liquid cooling concept for heat rejection of high power electronic devices existing in notebook computers etc. The design, fabrication, and performance of the planar ECF pump and farced-liquid cooling system are summarized. The electro-conjugate fluid (ECF) is a kind of dielectric and functional fluids, which generates jet flows (ECF-jets) by applying static electric field through a pair of rod-like electrodes. The ECF-jet directly acts on the working fluid, so the proposed planar ECF pump needs no moving part, produces no vibration and noise. The planar ECF pump, consists of a pump housing and electrode substrate, achieves maximum flow rate and output pressure of $5.5\;cm^3/s$ and 7.2 kPa, respectively, at an applied voltage of 2.0 kV. The farced-liquid cooling system, constructed with the planar ECF pump, liquid-cooled heat sink and thermal test chip, removes input power up to 80 W keeping the chip surface temperature below $70\;^{\circ}C$. The experimental results demonstrate that the feasibility of forced-liquid cooling system using ECF is confirmed as an advanced cooling solution on the next-generation high power electronic devices.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.765-770
• /
• 2010

In this study, the behavior of underground pipeline subjected to pile driving is examined using the verified finite element model based on the field experiment. Young's modules of surface soil is varied and elastic modulus of the other soil layer is fixed. The pile driving force model proposed by Mounir E. Mabsout in 1999 was used and it was functions of time and of force. The forcing function applied on this study considers the kinetic energy of ram located at 1.2m height with 7 tonf. The 3-layered pipeline is composed of steel(inner) pipe, PUR(Polyurethane Resin, filler) and HDPE(outer) pipe, and the length/diameter of main steel pipe is 20m/0.8m(O.D). It is used for district heating pipes in Korea. The results are expressed in terms of Von Mises stress, displacement, and vibration velocity for each soil condition. From the results of the analyses, PUR which is originally intended as a thermal insulation of inner pipe shows performance as a structural member which distributes external pressure.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.15-21
• /
• 2010

Recently, there is a demand for a thermal imaging microscope in the medical field as well as the semi-conductor industry Although the demand of the advanced thermal imaging microscope has been increased, it is very difficult to obtain the technology of developing a thermal camera, because it is used for defense industry. We developed the ${\times}5$ zoom microscope which has $3\;{\mu}m$ spatial resolution to research the design and fabrication of the IR (Infrared) optical system. The optical system of the IR microscope consists of four spherical lenses and four aspheric lenses. We verified individual sensitivity of each optical parameter as the first order approach to the analysis. And we also performed structure and vibration analysis. The optical elements are fabricated using Freeform 700A. The measurement results of surface roughness and form accuracy using NT 2000 and UA3P are Ra 2.36 nm and P-V $0.13\;{\mu}m$. Finally we ascertained resolution power of $3\;{\mu}m$ using USAF (United State Air Force) 1951 IR resolution test chart.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.339-343
• /
• 2014

$CaWO_4:Sm_x$(x = 0, 0.5, 1.0, 1.5, 2.0 mol%) white phosphors with different concentrations of $Sm^{3+}$ ions were synthesized using the hydrothermal method. The crystal structure, surface, and optical properties of the $CaWO_4:Sm_x$ phosphors were investigated using X-ray diffraction(XRD), field-emission scanning electron microscopy(FE-SEM), photoluminescence(PL) and photoluminescence excitation(PLE). From the XRD results, the crystal structure of the $CaWO_4:Sm$ phosphors was found to be tetragonal. The $CaWO_4:Sm$ phosphors became more cohesive with increasing $Sm^{3+}$-ion concentration. The photoluminescence excitation(PLE) peak of the phosphors, at around 250 nm, was ascribed to the transition from the 1A1 ground-state to the high-vibration level of 1T2 in the $WO{_4}^{2-}$ complex. The maximum emission spectra of the phosphors were observed when the $Sm^{3+}$ concentration was 0.5 mol%. The luminescence intensity of the $CaWO_4$ phosphors was decreased for $Sm^{3+}$ concentrations greater than 0.5 mol%.

• Smart Structures and Systems
• /
• 제5권1호
• /
• pp.23-42
• /
• 2009

In order to reduce vibration or to control shape of structures made of metal or composites, piezoelectric materials have been extensively used since their discovery in 1880's. A recent trend is also seen to apply piezoelectric materials to flexible structures made of rubber-like materials. In this paper a non-linear finite element model using updated Lagrangian (UL) approach has been developed for static analysis of rubber-elastic material with surface-bonded piezoelectric patches. A compressible stain energy function has been used for modeling the rubber as hyperelastic material. For formulation of the nonlinear finite element model a twenty-node brick element is used. Four degrees of freedom u, v and w and electrical potential ${\varphi}$ per node are considered as the field variables. PVDF (polyvinylidene fluoride) patches are applied as sensors/actuators or sensors and actuators. The present model has been applied to bimorph PVDF cantilever beam to validate the formulation. It is then applied to study the smart rubber components under different boundary and loading conditions. The results predicted by the present formulation are compared with the analytical solutions as well as the available published results. Some results are given as new ones as no published solutions available in the literatures to the best of the authors' knowledge.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.33-39
• /
• 2005

총구로부터 방출되는 폭발파에 대한 수학적 모델(GUNBLAST)을 수립하였으며, 폭발 하중에 대한 구조 응답 해석을 수행하였다. 폭발파는 자유영역 폭발파와 반사 폭발파로 구분되어질 수 있다. 본 연구에서는 스케일 기법을 이용하여 자유영역 폭발파 모델을 수립하였으며, 경사 충격파 이론과 전산유체역학(Computational Fluid Dynamics) 계산을 통하여 반사 충격파를 계산하였다. GUNBLAST는 두 가지의 구조 모델에 적용되었으며 구조 표면으로부터의 총구거리 변화에 따른 폭발파 특성을 파악하기 위하여 평판에 대한 적용을 통하여 균일하중조건과의 비교를 수행하였다. 또한 MSC/NASTRAN을 이용하여 12.7mm 기총을 장착한 비행기 날개 모델의 과도 응답 해석을 수행하였다. 결과적으로 이러한 폭발파는 랜덤진동과 항공기에 탑재된 장비에 고주파의 손상을 일으킬 수 있음을 확인하였다.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.224-229
• /
• 2006

There has been studied flow to minimize the spot size to increase data capacity. Optical data storage devices are being developed near practical limits with wavelength and NA of 405nm and 0.85. There has been studied many types of next generation storage devices such as blu-ray multilayer system, probe based data storage and holographic data storage. Among these data storage devices, solid immersion lens(SIL) based near field recording (NFR) has been widely studied. In this system, SIL is the key component that focuses the laser beam with a very small size which enables ultra high data capacity. Therefore, optical performance evaluation system is required for SIL assembly. In this dissertation, a simple and accurate SIL assembly measurement method is proposed with wedge plate lateral shearing interferometer(LSI). Wedge plate LSI is cheaper than commercialized interferometer, robust to the vibration and the moving distance for phase shifting is large that is order of micrometer. We designed the thickness, wedge angle, material, surface quality and wavelength of wedge plate as 1mm, 0.02degree, fused silica, lamda/10(10-5) and 405nm, respectively. Also, we confirmed simulation and experimental results with quantitative analysis. This simple wedge plate LSI can be applied to different types of SIL such as solid immersion mirror(SIM), hemispherical, super-hemispherical and elliptical SIL.